SICOM3000S: 8GP+4G/8P+4G Port Layer 2 Managed DIN-Rail PoE Switches

Giá: Liên hệ

SICOM3000S 8GP+4G/8P+4G Port Layer 2 Managed DIN-Rail PoE Switches của hãng Kyland hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. SICOM3000S được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh,…

Switch công nghiệp

Tính năng của sản phẩm:

Supports 10/100Base-TX or 10/100/1000Base-TX PoE port , and 1000Base-X SFP ports
Support maximum 8 802.3af/802.3at PoE ports, maximum 15/30W each port
Supports DT-Ring, DRP/DHP, STP/RSTP/MSTP for network redundancy
Supports DDM
Supports one-key recovery
Supports Automatic Configuration Backup and Restore
Supports IP40 protection
CE (Pending), FCC (Pending)

Thông số kỹ thuật của sản phẩm:

Software functions
	Switching	Supports VLAN, PVLAN Supports GVRP Supports port aggregation, LACP Supports port flow control Supports Rate limit based on flow (ACL Rate Limiter) Supports Global broadcast storm suppression (QOS Storm Policing)
	Redundancy	Supports DT-Ring, DT-Ring+, DT-VLAN with the recovery time<50ms Supports DRP/DHP with the recovery time<20ms Supports STP/RSTP/MSTP
	Multicast	Supports IGMP snooping Supports GMRP Supports static multicast Supports IGMPv2/v3
	Network Security	Supports HTTPS/SSL Supports SSH Supports TACACS+ Supports IEEE802.1X Supports RADIUS Supports User Classification Supports MAC address binding with switch ports
	Service Quality	Supports QoS, 802.1p(CoS), DSCP Supports SP, WRR queue scheduling Supports ACL
	Management and Maintenance	Supports Console, Telnet, WEB management methods Supports SNMPv1/v2c/v3, Kyvision centralized management Supports software upgrade by SFTP/HTTP Supports Power alarm, IP/MAC conflict alarm, Memory/CPU usage alarm, Port alarm, Ring alarm, Port traffic alarm, CRC error and packet lose alarm, SFP port RX power alarm and TX power alarm Supports DDM (SFP port) Supports loop detection Supports RMON Supports port mirroring Supports Syslog Supports LLDP Supports Link-check Supports Automatic Configuration Backup and Restore
	IP management	Supports DHCP server/snooping/client, DHCP Option 82 Supports ARP
	Clock Management	Supports SNTP Client
	PoE management	Support PoE port configuration and PD detection Support PoE port power supply priority configuration Support state query and alarm, remote management
Technical specifications
	Technical Parameter	Standard IEEE 802.3i (10Base-T) IEEE 802.3u (100Base-T and 100Base-FX) IEEE 802.3ab (1000Base-T) IEEE 802.3z (1000Base-SX/LX) IEEE 802.3ad (Link aggregation) IEEE 802.3x (Flow Control) IEEE 802.1p (Class of Service) IEEE 802.1Q (VLAN) IEEE 802.1d (STP) IEEE 802.1w (RSTP) IEEE 802.1s (MSTP) IEEE 802.1x (Network Access Control) IEEE 802.1ab (LLDP) IEEE 802.3af PoE IEEE 802.3at PoE+
	Switch Properties	Priority Queues 8 Number of VLANs 4K VLAN ID 1～4094 Number of Multicast Groups 8K MAC Table 8K Packet Buffer 4Mbit Packet Forwarding Rate 7.2Mpps (4GX8P), 17.9Mpps (4GX8GP) Switching Delay <5μs Jumbo Frame Size 9.6KB
	Interface	Gigabit Port 100Base-X, 1000Base-X SFP slot 10/100/1000Base-T(X), RJ45 port 802.3af/at PoE Port Each PoE port provides max 30W feed power V+ for pin 1, 2 and V- for pin 3,6(End-Span PSE) Fast Ethernet Port 10/100Base-T(X), RJ45 port 802.3af/at PoE Port Each PoE port provides max 30W feed power V+ for pin 1, 2 and V- for pin 3,6(End-Span PSE) DI/DO Port 2 DI, 2 DO, 8-pin 3.81mm-spacing terminal block Console Port RJ45, RS232 Alarm Contact 3-pin 5.08mm-spacing plug-in terminal block, 250VAC/220VDC Max, 2A Max
	LED	LEDs on Front Panel Running LED: Run Alarm LED: Alarm Power LED: PWR1,PWR2 Ring LED: Ring Interface LED: Link/ACT, Speed (RJ45 port); Link/ACT(Fiber port) PoE LED: ACT(PoE port) DI/DO LED: ACT (DI1,DI2,DO1,DO2)
	Button	Reset: Reboot and restore default configuration
	Power Requirement	Power Input L5: 24VDC(12-36VDC) L16: 48VDC(12-57VDC) 12-45VDC for no PoE 45-57VDC for PoE 51-57VDC for PoE+ Power Terminal 5-pin 5.08 mm-spacing plug-in terminal block Power Consumption L5: <16W(Non PD) PoE output 60W@12VDC-23VDC<br< a="">> PoE output 120W@24VDC-36VDC<br< a="">> L16: <16W@12-45VDC(Non PD) 45-57VDC for PoE (max 15W per POE port) 51-57VDC for PoE+ (max 30W per POE port) Overload Protection Support Reverse Protection Support Redundancy Protection Support
	Physical Characteristics	Housing Metal Cooling Natural convection, fanless Protection Class IP40 Dimension 75mm×168.2mm×135.5mm(W×H×D) 75mm×165mm×123mm(W×H×D) (excluding the connector, DIN rail, and component for panel mounting) Weight 1.35Kg Mounting DIN-Rail or Panel Mounting
	Environmental Limit	Operating Temperature -40℃～+75℃ Storage Temperature -40℃～+85℃ Ambient Relative Humidity 5% to 95% (non-condensing)
	Warranty	MTBF ＞300000h Warranty 5 years
	Approvals	CE (Pending), FCC (Pending)
	Industrial Standard	EMI FCC CFR47 Part 15,EN55032/CISPR22,Class A EMS IEC61000-4-2(ESD) ±6kV(contact),±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±2kV;Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM,±2kV/CM;Data Port:±1kV IEC61000-4-6(CS) 10V(150kHz～80MHz) Machinery IEC60068-2-6 (vibration) IEC60068-2-27 (shock) IEC60068-2-32 (free fall)

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"

DG-A2/A4: Industrial DIN-Rail Protocol Gateways for Smart Grid

Giá: Liên hệ

DG-A2/A4 Industrial DIN-Rail Protocol Gateways for Smart Grid của hãng Kyland&nbs...

SICOM3000S: 8GP+4G/8P+4G Port Layer 2 Managed DIN-Rail PoE Switches

Bài viết mới cập nhật...

Catalog online

FIND US ON: