M4300-96X là dòng switch được trang bị 12-Slot Modular Stackable Managed với thẻ mở rộng 8 cổng 10G và 2 cổng 40G. Cung cấp các dịch vụ hiệu quả về chi phí L2/L3/L4 và IPv4/IPv6 cho doanh nghiệp trung cấp với các triển khai lõi PoE và SMB đầy đủ với khả năng sử dụng dễ dàng. Bộ tính năng layer 3 bao gồm định tuyến tĩnh, động và dựa trên chính sách - làm tiêu chuẩn. Hoàn hảo cho truy cập không dây, truyền thông hợp nhất và video IP, Dòng chuyển mạch NETGEAR M4300 cũng sẵn sàng cho tương lai, với Mạng được xác định bằng phần mềm (SDN) và OpenFlow 1.3 cho mạng của hãng Netgear hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam.
Tính năng sản phẩm
- Cost effective 1G access layer in campus LAN networks, and high performance 10G distribution layer for midsize organizations networks
- Zero Touch AV-over-IP with pre-configured L2 Multicast on all 1G models (1G AV encoders and decoders) and 10G models (SDVoE-ready)
- Advanced Layer 2, Layer 3 and Layer 4 feature set - no license required - including Policy Based Routing, RIP, VRRP, OSPF and PIM
- Innovative mixed "Spine and Leaf", 1G and 10G stacking with nonstop forwarding and hitless failover redundancy
- Low acoustics, half-width 16-port and 24-port 10G models can be paired in a single rack space for redundant Top of Rack
- Up to 384 (Gigabit) ports, 768 (10 Gigabit) ports, 192 (40 Gigabit) ports or a combination in a stack seen as one “logical” switch
- PoE+ (30 watts per port) with hot swap, redundant power supplies and full provisioning
- 48- and 96-port 10G models’ ultra-low latency and scalable table size with 128K MAC, 8K ARP/NDP, 4K VLANs, 12K routes
- Mixed Stack of 1G and 10G models provides 16K MAC, 2K ARP/NDP, 4K VLANs and 512 routes
- SDN-Ready OpenFlow 1.3 support for maximum investment protection
Software:
- Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP transport ports) security and prioritization
- Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any type of Ethernet channeling
- Voice VLAN with SIP, H323 and SCCP protocols detection and LLDP-MED IP phones automatic QoS and VLAN configuration
- Efficient authentication tiering with successive DOT1X, MAB and Captive Portal methods for streamlined BYOD
- Comprehensive IPv4/IPv6 static and dynamic routing including Proxy ARP, OSPF, Policy-based routing and automatic 6-to-4 tunneling
- Enhanced IPv4/IPv6 multicast forwarding with IGMPv3/MLDv2 ASM and SSM Proxy and Control Packet Flooding protection
- High performance IPv4/IPv6 multicast routing with PIM timer accuracy and unhandled PIM (S,G,rpt) state machine events transitioning
- Advanced IPv4/IPv6 security implementation including malicious code detection, DHCP Snooping, IP Source Guard protection and DoS attacks mitigation
- Innovative multi-vendor Auto-iSCSI capabilities for easier virtualization optimization
Availability:
- Dual redundant, modular power supplies equipping full width models contribute to business continuity management
- Vertical or horizontal flexible stacking with management unit hitless failover and nonstop forwarding across operational stack members
- Spine and leaf architecture with every leaf switch (1G access switches) connecting to every spine switch (distributed 10G "core" switches)
- Stacking and distributed link aggregation allow for multi-resiliency with zero downtime and load balancing capabilities
- Link Dependency new feature enables or disables ports based on the link state of different ports
- Per VLAN Spanning Tree and Per VLAN Rapid Spanning Tree (PVSTP/PVRSTP) offer interoperability with PVST+ infrastructures
Management:
- DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
- Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation
- Service port for out-of-band Ethernet management (OOB)
- Standard RS232 straight-through serial RJ45 and Mini-USB ports for local management console
- Standard USB port for local storage, logs, configuration or image files
- Dual firmware image and configuration file for updates with minimum service interruption
- Industry standard command line interface (CLI) for IT admins used to other vendors commands
- Fully functional Web console (GUI) for IT admins who prefer an easy to use graphical interface
- Single-pane-of-glass NMS300 management platform with mass-configuration support
Thông số kỹ thuật của sản phẩm
Model Description
- 12-Slot Modular Stackable Managed Switch with 8-port 10G and 2-port 40G expansion cards
Datasheet (PDF)
Datasheet (Excel)
Ordering Number
- XSM4396K0 (empty switch, no PSU)
- XSM4396K1 (48-port 10G fiber SFP+ starter kit with one APS600W PSU)
Acoustics
- Without PoE: 35.8dB @ 25°C (77°F)
- With max PoE load: 66.8dB @ 25°C (77°F)
Power Consumption (Max)
- Without PoE: 566 Watts
- With 1,440W PoE: 2,006 Watts
1G RJ45 Ports
10G RJ45 Ports
- 0 to 96 x 10GBASE-T (Fast Ethernet, 1G, 2.5G, 5G, and 10G speeds)
- APM408C is the 8 x 10GBASE-T port card
- APM408P is the 8 x 10GBASE-T PoE+ port card
10G Fiber SFP+ Ports
- 0 to 96 x SFP+ (1G and 10G speeds)
- APM408F is the 8 x SFP+ port card
40G Fiber QSFP+ Ports
- 0 to 24 x QSFP+ (4x10G and 40G speeds)
- APM402XL is the 2 x 40G QSFP+ port card
Power over Ethernet
- 0 to 48 x 10G PoE+ 30W
- Only the top 6 slots (out of 12) can support PoE+ operation
- APS1200W PSU is preferred for PoE+ operation
PoE Budget (Watts)
- 0W PoE Budget with 1 x APS600W PSU @ 110V/220V AC input
- 634W PoE Budget with 2 x APS600W PSUs in shared EPS mode @ 110V/220V AC input
- 720 W PoE Budget with 1 x APS1200W PSU @ 110V/220V AC input
- 720 W PoE Budget with 2 x APS1200W PSUs in redundant RPS mode @ 110V/220V AC input
- 1,084 W PoE Budget with APS600W + APS1200W PSUs in shared EPS mode @ 110V/220V AC input
- 1,440 W PoE Budget with 2 x APS1200W PSUs in shared EPS mode @ 110V/220V AC input
Feature Set
- Layer 3 (static, policy-based and RIP OSPF VRRP PIM dynamic routing)
Management Ports
- 1G Ethernet service port for out-of-band management (OOB, RJ45)
- RS232 straight-through serial RJ45 for local management console
- Mini-USB port for local management console
- USB port for local storage, logs, configuration or image files
Form Factor
- 2RU modular switch that comes either empty or in a starter kit with 48 SFP+ port
- Full width with dual, redundant modular PSUs for business continuity
- APS600W is the 600W power supply unit for non-PoE applications
- APS1200W is the 1,200W power supply unit for PoE applications
Các bài viết tham khảo: