GW7600V Là sản phẩm VDSL2/ADSL2+ LTE Router with Fibre SFP Interface của hãng Virtual Access–Ireland hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. GW7600V được thiết theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông minh, hệ thống kiểm soát an ninh,…
Tính năng của sản phẩm:
Management
- Automatic configuration using Activator server
- HTTP/HTTPS
- Command line interface via Telnet or SSH
- TFTP client download/upload
- SNMP agent
- SMS management support
VDSL/ADSL Standards Supported
- ETSI TS 101-270 VDSL
- ITU-T 993.1 VDSL foundation
- ITU-T 993.2 VDSL2
- ANSI T1.424 VDSL
- ITU-T G.998.4 retransmission
- ITU-T G.993 vectoring
- ITU-T G.992.1/3/5 ADSL1/2/2+ Annex A, B, I, J, M and L
Fault Investigation and Reporting
- Event logging
- Packet tracing
- Syslog support
Routing Features
- IPv4 and IPv6
- DHCP server/client
- DynDNS
- NAT
- NAT Traversal
- NTP Client
- VLAN support
- Packet filtering
- Firewall
- Port forwarding
- BGPv4, OSPF
- RIP (v1 and v2)
- IPSec/L2TP/GRE
- SNMP v1/v2/v3
- TLS 1.2
- 802.1x authentication
- IEC104
IPSecVPN
- IKE version 2
- x.509 certificates
- Eliptic Curve Cryptography (ECC)
- SHA2_512 support
- AES_CBC (256), 3DES and DES
- PFS
- SCEP
- DH_8192
GigE Interface
Four 10/100/1000 Mbps Base-T Ethernet ports
Ports can be divided into separate LANs using port-based VLAN feature
Auto-detects a regular or crossover cable for easy connection to a switch or hub
WAN Interface
Wireless WAN with 3G and LTE options
Ethernet ports can optionally be configured for WAN use
Fibre Ethernet Interface (Optional)
SFP fibre socket for 1 Gigabit Ethernet interface
USB Interface
USB hi-speed type A socket
Dial Modem Interface (Optional)
V.92 support up to 56Kbps
Caller ID can answer calls from known diallers only
E1/T1 Interface
1 x E1/T1 interface
120 ohm balanced
75 ohm available with optional balun
E1: output and tolerance according to G.823, transfer according to G.705
T1: according to AT&T TR-62411
Quad Async Serial Interface (Optional)
- 4 x RJ45 async serial ports
- RS232 and RS485 to 115.2 Kbps
Sync/Async Serial Interface (Optional)
- Single sync/async serial ports
- RS-232E, RS-422A, RS-449, RS-485, RS-530, V.24, V.35, V.36 and X.21 on a 44-way D-type female connector
- Sync serial speeds up to 2Mbps
- Async serial speeds up to 115.2Kbps
Leased Line (Optional)
- Supports Leased Line interfaces
- 2 wire ETSI EN 300 448, 4 wire V1.2.1, ETSI
- EN 300 451, 4 wire input and output ports
- 2 & 4 wire ITU-T M.1040 and ITU-TM.1020/1025
- 1 RJ11 socket
- Impedance: 600 ohms
- Clock recovery eliminates data loss due to clock slippage
WiFi
- 802.11ac b/g/n
- WPA/WPA2
- Dual-band (2.4 or 5GHz) two modules can be fitted for concurrent dual band support
- 64/128/152-bit WEP encryption, IEEE 802.1x authentication, AES and TKIP encryption
ISDN
- ISDN BRI, S TE/NT
- Includes adaptive clock recovery capability
- ISDN Q.931 to SIP conversion
SCADA Support
- IEC60870-5-104 to IEC60870-5-101 gateway
- DNP3 TCP/IP to serial conversion
X.25 Support
- X.25 over TCP/IP (XOT)
- X.25 over X.25 Migration Protocol (XMP)
- X.3, X.28, X.29 PAD
Pseudowire Support
- CESoPSN: IETF RFC 5086
- SAToP: IETF RFC 4553
VLAN Support
- Tag-based 802.1Q VLAN or port-based VLAN on 4 ports
Antenna Options
- 2 x SMA female antenna sockets are provided for each radio (WAN or WiFi)
- Many antenna options are available
Approvals and CE Certificates
- EN60950 safety approval
- EN55022 and EN55024 EMC
Operating Power
AC:
- IEC mains connector
- 100V-240V AC, 10 Watts
DC:
- Dual DC inputs
- 9-36 or 18-75V DC isolated
Physical and Environment
- Unit size: 310W 172D 43H mm
- Unit weight: 2.4kg
- Conformal coating option
Operating Temperature
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"