HARDWARE |
|
Material |
Brushed aluminium alloy |
Dimensions (mm) |
92.5 x 57.2 x 22.5 without connectors |
Weight (g) |
Approx. 150 |
Temperature & humidity ranges |
– *Operating*: -20 °C ~ +60 °C; up to 95% RH
– Storage: -40 °C ~ +85 °C; up to 95% RH
|
CPU |
– MIPS32â 24KEcä CPU running at 580 MHz
– Built-in 64 KB [resp. 32 KB] instruction [resp. data] cache
|
SPI Flash memory |
32 MB |
*DDR2 SDRAM* |
128 MB |
Power-off timekeeping |
RTC with an approx. 100-day data retention period; courtesy of a 15 mWh lithium manganese battery (not functional below -20 °C) |
Power consumption (W) |
All figures worst-case (60 °C, 32 V, all subsystems fired on, etc.)
– Idle: 0.96 (E215); 1.10 (E214); 1.10 (E218)
– Standby: 2.31 (E215); 2.63 (E214); 2.63 (E218)
– Communication (Tx max.): 5.54 (E215); 6.18 (E214); 6.18 (E218)
|
|
|
|
ePack SOFTWARE SUITE |
Administration and Network protocols |
Web-based user interface, setup wizard, console log viewer, save / load configuration, NTP, SMS / OTA remote configuration, TR-069-capable |
Redundancy |
Ethernet, Cellular, Wi-Fi – configurable as failover or load balancing |
Resilience |
Network connectivity watchdog (configurable), internal application watchdog |
Wi-Fi |
Client or Access point (approx. 40-user), multiple SSID, WEP, WPA, WPA-PSK / WPA2-PSK security modes |
Device management services |
via either our own D2Sphereä platform or third-party platforms such as TrinitySMART, Thingworx, Thing+, Cumulocity, etc. |
Security |
Zone-based firewall, VLAN, DMZ, HTTPS local and remote connection, SIM PIN |
Performance and Fault management |
Real time processor load and interface (WAN / LAN / Wi-Fi), traffic analysis, ICMP, trace-route, NS lookup |
Routing |
DHCP, static routing, port forwarding, traffic routing, static / dynamic DNS, DNS proxy, NAT, STP |
VPN |
PPTP client, L2TP, OpenVPN client / server / passthrough, GRE, IPsec |
Industrial protocols |
Modbus RTU to TCP support; Modbus master |
|
|
|
OPERATION and CONTROLS |
Power |
8 V dc ~ 32 V dc with Slow Start; via the upper row of a dual row, 4-pin, Micro-Fit™ 3.0 header |
I/Os |
Two isolated digital I/Os; via the lower row of the same header
– Input: 0 V dc ~ 1 V dc à zero; 1.4 V ~ 36 V dc à one
– Output: open collector; 100 mA max.; 36 V dc max.
|
Reset button |
Short (2 s £ < 10 s) / Long (³ 10 s) press for Soft / Hard Reset |
RS-232 |
Full implementation; via a 9-pin sub-D header |
10/100BASE-T Ethernet |
One LAN port and one WAN port, user-reconfigurable as second LAN port; via RJ-45 headers fitted with two LEDs |
Wi-Fi |
1T1R Wi-Fi 4; via an RP-SMA antenna connector |
Cellular (details in the table below) |
One- or two-antenna models as:
– 3G E215[G]; LTE-M1 E213G; via an SMA antenna connector
– LTE cat. 1 E214[G]; LTE cat. 4 E218[G]; via two SMA antenna connectors (main and diversity)
|
*Dual SIM* |
Dual SIM / Single standby (“DSSS”); via two mini-SIM held in trays |
*Location services* |
Concurrent GPS and GLONASS (E215G, E213G); IZat™ gen. 8C gpsOne (E214G, E218G); via a dedicated SMA antenna connector |
*Data storage* |
via a user-accessible microSD card (not provided) |
Operating status LEDs |
Seven as green for (i) Power; blue for (ii) SIM; (iii) Wi-Fi; amber for (iv) Activity; (v) Network; (vi) Signal; red for (vii) Alert |
|
|
|
*FACTORY OPTIONS* (subject to MOQ and other considerations) |
“XTR” |
-30 °C ~ +70 °C operating temperature range |
DDR2 SDRAM |
Doubled to 256 MB |
Alternate data storage |
64 MB [resp. 1 GB] of internal Flash memory, arranged in 512- [resp. 2,048-] byte pages, substituted for the standard microSD card holder |
MFF SIM(s) |
Combination of (i) ‘MFF + mini’; or (ii) ‘mini + MFF’; or (iii) ‘MFF + MFF’ SIMs, substituted for the standard two mini-SIM trays |
Location services |
IZat™ gen. 8C gpsOne (E214#02, E214#078, E218#04 only); via a dedicated SMA antenna connector |
|
|
|
ADD-ON |
Snap Capä |
SC485, a 9-pin male sub-D plug that ‘snappily’ converts any E210 unit into an isolated, half- or full-duplex (user-selectable via a slide switch) RS-485 unit via a 5-pin, 3.5 mm pitch, COMBICON header |
|
|
|
ESSENTIAL ACCESSORIES |
Power cords |
KDC42 or KDC44 (the latter with two more stripped wires for I/Os) |
Remote, adhesive, cellular and cellular / GNSS antennas |
All IP67-rated, except for A31M0 (IP33) and A31H0 (N/A)
– A31M0 or A31H0, LTE: E215
– A14M0 or A14H0, ‘2-in-1’ LTE + GNSS: E215G, E213G
– A32M0 or A32H0, ‘2-in-1’ LTE + LTE: E214, E218
– A33M0 or A33H0, ‘3-in-1’ LTE + LTE + GNSS: E214G, E218G
|
Wi-Fi antennas |
L-shaped, hinged, A24C0 (while stocks last) or A21H0 |
DIN Rail clip |
BR551, dual mount 5½ U or 1½ U; mounting bracket too |