Software Functions |
|
Switching |
Supports static VLAN, Private VLAN Supports port flow control Supports speed limit, Broadcast, Multicast, Unknown unicast storm control Static and dynamic MAC addresses and MAC address aging |
|
Redundancy |
Supports VRRP Supports RSTP (Rapid Spanning Tree Protocol) Supports DRP with recovery time<20ms Supports Link Aggregation (LACP, IEEE802.3ad) |
|
Routing |
Supports Static Routing (L3 Switch only) Supports OSPF (L3 Switch only) Supports RIP (L3 Switch only) |
|
Multicast |
Supports IGMP snooping Supports GMRP Supports PIM-SM, PIM-DM Supports IGMP v2/v3 |
|
Network Security |
Supports IEEE 802.1x(authentication and authorization) Supports HTTPs/SSL Supports SSH Supports a local RADIUS server and also the forwarding of an authentication to an external RADIUS server. Supports TACACS+ Unicast MAC Filtering |
|
Service Quality |
Supports ACL Control and limit the data traffic for each port (as well dependent of the protocol) Supports 802.1p TOS/DiffServ, Supports SP, WRR queue scheduling |
|
Management and Maintenance |
Supports Console, Telnet, WEB management methods Supports SNMP Management, SNMPv1/v2c/v3 SNMPv3 supports DES and AES encryption Supports TCP/UDP, Ping, Trace route Supports upload/download for software and configuration by FTP/TFTP/SFTP/HTTP/HTTPs Supports port mirroring and remote mirror port Supports LLDP and LLDP MIB(802.1ab) Supports the configuration of a maximum packet size (MTU) Supports ICMP, ICMP Router Discovery |
|
Diagnosis |
Supports internal hardware self-test, Supports IP/MAC conflict alarm, power failure alarm, port alarm and ring alarm Supports Syslog, the maximum size of the log file needs to be specified |
|
IP Management |
Supports IPv4 Supports DHCP server/option12 Supports Port Security over DHCP Supports DHCP-relay-agent/option 82/61/66/67 Supports BOOTP/Bootstrap Protocol DHCP Relay Agent Information Option DHCP Client Supports DNS Relay(L3 Switch only) Supports ARP Supports NAT, NAPT (L3 Switch only) |
|
Clock management |
Supports SNTP client Supports NTP client |
|
Characteristic function |
Supports bypass power failure bypass function Supports IEC 61375-2-5, IEC61375-2-3: TTDP, TRDP, TTDB functions (ETBN only) Supports high performance NAT function (L3 Switch only) Supports Auto-Backup and Configuration |
|
MIB |
Public MIB: MIB-II, LLDP MIB, ifXTable, dotldBridge, TTDP MIB, RSTP MIB, IGMP snooping MIB, DRP MIB Private MIB: kylandPort, kylandDev, KylandAlarm, Private LLD, kylandUpdate, kylandUpdateCfg, kylandDownloadCfg |
|
Technical Specification |
|
|
|
Technical Parameter |
Standard IEEE 802.3 10BASE-T specification IEEE 802.3x 10BASE-T full duplex IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE- T specification IEEE 802.3af IEEE802.3at |
|
Switch Properties |
Priority Queues 8 Number of VLANs 4K VLAN ID 1~4094 Number of Multicast Groups IPv4:2K Routing Table IPv4:4K MAC Table 32K Packet Buffer 32Mb Packet Forwarding Rate 9.5Mpps Switching Delay <10us |
|
Interface |
Gigabit Port 10/100/1000Base-T(X) - M12 X-coded connector Bypass 4 ports of the switch offer two Bypass function Fast Ethernet Port 10/100Base-T(X) - M12 D-coded connector PoE Support IEEE803.2af Support IEEE802.3at Console Port RS232 - M12 A-coded connector Alarm contact M12 A-coded connector USB M12 A-coded connector |
|
LED |
LEDs on Front Panel Running LED: Run Alarm LED: Alarm Power LED: PWR1, PWR2 Interface LED: Link/ACT POE LED: ACT(POE models only) |
|
Power Requirements |
Power Input 24VDC/110VDC - M23 connector (for switch power supply) 50~54VDC - M12 connector (for additional isolated power supply) Power Terminal M23 connector M12 connector for optional external power supply Power Consumption <25W@110VDC without PoE <170W@110VDC with 120W PoE PoE output Integrated power supply provides 80/120W PoE output. Additional 120W can be increased by adding isolated external power supply. Overload Protection Support Reverse Connection Protection Support Redundancy Protection Support |
|
Physical Characteristics |
Housing Metal cooling Nature cooling, fanless Protection Class IP65 Dimensions 189mm×380mm×91.3mm(H×W×D) Weight 5Kg Mounting Wall mounting |
|
Environmental Limits |
Operating Temperature -40°C to +70°C Storage Temperature -40°C to +85°C Ambient Relative Humidity 5 to 95% (non-condensing) |
|
Warranty |
MTBF >300000h (calculation based on Telcordia (Bellcore) SR-332, Issue 2, September 2006)
|
|
Approvals |
CE, FCC, EN50121, EN50155, EN45545: H6-H6 CE, FCC, EN50121, EN50155, EN45545: L2-L2 (Pending) |
|
Industrial Standard |
EMI FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS DIN EN 50121 / DIN EN 55022 Fire protection DIN EN 45545 Safety EN60950-1 Machinery IEC61373 (Vibration and Shock) IEC60068-2-32 (Free Fall) Protection class IP65 Based on EN 60529 Hazardous Matreial 2002/95/EG of the EU (RoHS) |
|