C-10G: Media Converter Modules 10 Gigabit Copper and Fiber Converters

Giá: Liên hệ

C-10G Media Converter Modules 10 Gigabit Copper and Fiber Converters của hãng Perle hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. C-10G được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh…

Bộ chuyển đổi Quang điện

Tính năng của sản phẩm:

Fiber to Fiber, copper to fiber and copper to copper conversion
2 empty slots that use a variety of 10G transceivers supplied by Perle, Cisco or other MSA compliant SFP+ and XFPs
Advanced features –Smart Link Pass-Through, Fiber Fault Alert, Built-in Link Test Generator and Loopback
High density applications with Perle MCR1900 Media Converter Chassis
Support for Power Level 1,2,3 as well as high-power Level 4 XFPs
Optical signal regeneration: 3R (re-amplify, reshape, and retime)

Thông số kỹ thuật của sản phẩm:

Power	Dual SFP	Dual XFP	XFP to SFP
Maximum Power Consumption (watts)	6.7	XTX: 12.0 * XTXH: 16.3 *	XTS: 9.1 * XTSH: 16.3 *
Total Transceiver Power Supported (watts)	3.0	XTX: 7.0 XTXH: 11.0	XTS: 5.0 XTSH: 7.0

Connectors	Dual SFP	Dual XFP	XFP to SFP
Pluggable 10G Fiber Transceiver slots ( Hot insertion and removable)	Two 10 Gigabit SFP+ Slots Power level 1, 2	Two 10 Gigabit XFP Slots Power level 1,2,3 Power Level 4 (XTSH model)	One 10 Gigabit SFP+ Power Level 1, 2 One 10 Gigabit XFP Power level 1,2,3 Power Level 4 (XTSH model)
Voltages supplied to XFP slots	-	1.8V, 3.3V, 5V and -5.2V	1.8V, 3.3V, 5V and -5.2V
Supported 10 Gigabit Fiber pluggable transceivers	IEEE 802.3ae compliant: 10GBase-SR 10GBase-LRM 10GBase-LR 10GBase-ER 10GBase-ZR CWDM/DWDM	IEEE 802.3ae compliant: 10GBase-SR 10GBase-LRM 10GBase-LR 10GBase-ER 10GBase-ZR CWDM/DWDM	IEEE 802.3ae compliant: 10GBase-SR 10GBase-LRM 10GBase-LR 10GBase-ER 10GBase-ZR CWDM/DWDM
Supported 10 Gigabit Copper pluggable transceivers	SFP+ Direct Attach Cable (DAC). Also known as: Twinax 10GBase-CU 10GSFP+Cu 10GBase-CX1 10GBase-CR1 Note: Passive and Active cable types supported	IEEE 802.3ak compliant: XFP 10GBase-CX4 copper	SFP+ Direct Attach Cable (DAC). Also known as: Twinax 10GBase-CU 10GSFP+Cu 10GBase-CX1 10GBase-CR1 Note: Passive and Active cable types supported IEEE 802.3ak compliant: XFP 10GBase-CX4 copper
Supported Gigabit Fiber SFPs	1000Base-SX 1000Base-LX/LH 1000Base-EX 1000Base-ZX 1000Base-BX CWDM/DWDM Note: In this mode both SFP modules must operate 1000Base-X	N/A	N/A
Chassis Slot profile	One slot	XTX: one slot XTXH: two slots	XTS: one slot XTSH: two slots
Environmental Specifications	Dual SFP	Dual XFP	XFP to SFP
Operating Temperature	0° C to 50° C (32° F to 122° F)
Storage Temperature	minimum range of -25° C to 70° C (-13° F to 158° F)
Operating Humidity	5% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Operating Altitude	Up to 3,048 meters (10,000 feet)
Heat Output ( BTU/HR )	22.9	XTX: 39.2 XTXH: 55.6	XTS: 31.0 XTSH: 55.6
MTBF (Hours)**	367,714	335,191	335,191
Packaging
Shipping Weight	0.25 Kg, 0.55 lbs
Shipping Dimensions	Standard Power Models: 150 x 210 x 40 mm, 5.9 x 8.3 x 1.6 inches High Power models ( XTXH, XTSH ): 170 x 260 x 70 mm, 6.7 x 10.2 x 2.8 inches

Model	Port	Slot	SFP+ Power Levels	XFP Power Levels	Maximum Total Transceiver Power Supported
C-10G-STS	Port 1	SFP+	Level 1 ( up to 1.0 watts )	-	3.0 watts
			Level 2 ( up to 1.5 watts )	-
	Port 2	SFP+	Level 1 ( up to 1.0 watts )	-
			Level 2 ( up to 1.5 watts )	-
C-10G-XTS	Port 1	XFP	-	Level 1 ( up to 1.0 watts )	5.0 watts
			-	Level 2 ( 1.5 to 2.5 watts )
			-	Level 3 ( 2.5 to 3.5 watts )
	Port 2	SFP+	Level 1 ( up to 1.0 watts )	-
			Level 2 ( up to 1.5 watts )	-
C-10G-XTSH	Port 1	XFP	-	Level 1 ( up to 1.0 watts )	7.0 watts
			-	Level 2 ( 1.5 to 2.5 watts )
			-	Level 3 ( 2.5 to 3.5 watts )
			-	Level 4 ( 3.5 to 5.5 watts )
	Port 2	SFP+	Level 1 ( up to 1.0 watts )	-
			Level 2 ( up to 1.5 watts )	-
C-10G-XTX	Port 1	XFP	-	Level 1 ( up to 1.0 watts )	7.0 watts
			-	Level 2 ( 1.5 to 2.5 watts )
			-	Level 3 ( 2.5 to 3.5 watts )
	Port 2	XFP	-	Level 1 ( up to 1.0 watts )
			-	Level 2 ( 1.5 to 2.5 watts )
			-	Level 3 ( 2.5 to 3.5 watts )
C-10G-XTXH	Port 1	XFP	-	Level 1 ( up to 1.0 watts )	11.0 watts
			-	Level 2 ( 1.5 to 2.5 watts )
			-	Level 3 ( 2.5 to 3.5 watts )
			-	Level 4 ( 3.5 to 5.5 watts )
	Port 2	XFP	-	Level 1 ( up to 1.0 watts )
			-	Level 2 ( 1.5 to 2.5 watts )
			-	Level 3 ( 2.5 to 3.5 watts )
			-	Level 4 ( 3.5 to 5.5 watts )

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!

Downloads c-10g-installation-guide-bkaii.pdf