IOLAN SDS4 HL: Device Server for Hazardous Locations (Hazloc)

Giá: Liên hệ

IOLAN SDS4 HL Device Server for Hazardous Locations (Hazloc) của hãng Perle-Canada hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. IOLAN SDS HL thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh,…

Bộ chuyển đổi Quang điện

Tính năng của sản phẩm:

4 software selectable RS232/422/485 serial port interfaces
Class 1 Division 2 certified for hazardous locations
Conformal coated circuit board
-40F to +165F (-40C to +74C) extended temperature support
10/100 Ethernet
Advanced security features for data encryption, user authentication and event management

Thông số kỹ thuật của sản phẩm:

Hardware Specifications - IOLAN SDS4 HL - 4 port Compact Device Servers - For Hazardous Locations

	IOLAN SDS4 HL
Processor	MPC852T, 66 Mhz, 87 MIPS
Memory
RAM MB	32
Flash MB	8
Interface Ports
Number of Serial Ports	4
Serial Port Interface	Software selectable EIA-232/422/485 on RJ45
Sun / Solaris	Sun / Oracle ‘Solaris' Safe - no "break signal" sent during power cycle causing costly server re-boots or downtime
Serial Port Speeds	50bps to 230Kbps with customizable baud rate support
Data Bits	5,6,7,8, 9-bit protocol support
Parity	Odd, Even, Mark, Space, None
Flow Control	Hardware, Software, Both, None
Serial Port Protection	15Kv Electrostatic Discharge Protection ( ESD )
Local Console Port	RS232 on Serial Port
Network	10-base T / 100-base TX Ethernet RJ45
	Software selectable Ethernet speed 10/100 Auto
	Software selectable Half/Full/Auto duplex
Ethernet Isolation	1.5Kv Magnetic Isolation
Power
Power Supply Options	Power via External power 9-30v DC, 4.8 Watts Terminal Block connector Power IN over serial cable
Nominal Inut Voltage	12v DC
Input Voltage Range	9-30v DC
Input IOLAN over Serial	9-30v DC
Typical Power Consumption @ 12v DC ( Watts )	2.4
Indicators
LEDs	Power/Ready
	Network Link
	Network Link activity
	Serial: Transmit and Receive data per port
Environmental Specifications
Heat Output ( BTU/HR )	8.2
MTBF ( Hours )*	118,466
Operating Temperature	-40C to 74C, -40F to 165F
Storage Temperature	-40C to 85C, -40F to 185F
Humidity	5 to 95% (non condensing) for both storage and operation.
Case	SECC Zinc plated sheet metal (1 mm)
Ingress Protection Rating	IP40
Mounting	Wall or Panel mounting, DIN Rail mounting kit optional
Product Weight and Dimensions
Weight	0.7 Kg (1.6 lbs)
Dimensions	11.3 x 8.1 x 2.8 (cm), 4.4 x 3.2 x 1.1 (in)
Packaging
Shipping Dimensions	25.5 x 16.5 x 6.5 (cm), 10 x 6.5 x 2.6 (in)
Shipping Weight	1.1 Kg (2.4 lbs)
Regulatory Approvals
Emissions	FCC Part 15, Subpart B, Class A
	CFR47:2003, Chapter 1, Part 15 Subpart B,(USA) Class A
	ICES-003, Issue 4, February 2004 (Canada)
	CISPR 32:2015/EN 55032:2015 (Class A)
	EN55011 (CISPR11)
	EN61000-3-2 : 2010, Limits for Harmonic Current Emissions
	EN61000-3-3 : 2010, Limits of Voltage Fluctuations and Flicker
Immunity	CISPR 24:2010/EN 55024:2010
	EN61000-4-2: Electrostatic Discharge
	EN61000-4-3: RF Electromagnetic Field Modulated
	EN61000-4-4: Fast Transients
	EN61000-4-5: Surge
	EN61000-4-6: RF Continuous Conducted
	EN61000-4-8: Power-Frequency Magnetic Field
	EN61000-4-11: Voltage Dips and Voltage Interruptions
Safety	IEC 60950-1(ed 2); am1, am2 and EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Safety	CAN/CSA-C22.2 No. 60950-1-03 and ANSI/UL 60950-1, First Edition April 1st 2003 (Recognized Component)
Hazardous Locations	EN 60079-0:2012+A11:2013, EN 60079-15:2010 and EN 60079-11:2012 ANSI/ISA - 12.12.01 - 2012 Class I and II, Division 2 and Class III, Division 1 and 2 ( classified ) locations ( UL-1604 ) CSA C22.2 No. 213 - M1987, R2008 ATEX Class 1 Zone 2

Các bài viết tham khảo:

"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"