PTC1000 PTP Clock Converters của hãng Kyland hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. PTC1000 được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh,…
Tính năng của sản phẩm:
- Support IEEE 1588v2, the synchronization accuracy reaches ±100ns.
- Support ITU-T.G.8261/G.8262 SyncE, the synchronization accuracy can reach ±50ns with SyncE enabled.
- Support 1 100Base-FX SC/ST/FC or 1 10/100Base-TX RJ45 IEEE1588 input.
- Support PPS output, IRIG-B TTL outputs, and IRIG-B AM modulation.
- Supports IRIG-B000, B001, B002, B003, B004, B005, B006, B007, B120, B121, B122, B123, B124, B125, B126, B127.
- Complies with IEC 61850-3 and IEEE1613.
- CE, UL508 certificates.
Thông số kỹ thuật của sản phẩm:
| Software Functions |
|
| Management & Maintenance |
Supports Console, Telnet, and Web management methods.
Supports SNMPv1/v2c and can managed by Kyvision.
Supports software update over FTP.
Supports the power failure alarm, power alarm |
|
| Clock Management |
Supports PTPv2 (IEEE1588-2008).
Supports Power profile (C37.238).
Supports Telecom profile (in special version).
Supports synchronous Ethernet (ITU-T.G.8261/G.8262). |
|
| Product Specifications |
|
|
|
| Standard |
IEEE 802.3i(10Base-T)
IEEE 802.3u(100Base-TX and 100Base-FX)
IEEE 1588-2008(PTPv2)
ITU-T.G.8261/G.8262 (synchronous Ethernet) |
|
| Interface |
PTP port:
100Base-FX, single/multi mode, SC/ST/FC connector
10/100Base-T(X), RJ45 port
Console port: RS232,RJ45
Alarm contact:
3-pin 5.08mm-spacing plug-in terminal block, 250 VAC/220 VDC Max, 2A Max, 60 W Max
Clock Signal:
PPS: TTL level +5V, 50Ω, Rising edge based, pulse width 20ms-200ms, stepped by 20ms (configurable in software), BNC connector
IRIG-B DC:
TTL level +5V, 600Ω, Rising edge based, BNC connector or 2-pin
5.08mm-spacing plug-in terminal block
RS422, 2-pin 5.08mm-spacing plug-in terminal block
IRIG-B AM: Vp-p, 3V-10V (configurable in software, default Vp-p: 4.5V), 600Ω, Modulation Ratio 3:1, 4:1, 5:1, 6:1 (optional, default modulation ratio is 3:1), BNC connector or 2-pin 5.08mm-spacing plug-in terminal block |
|
| LED |
LED on front panel
Running LED: Run
Alarm LED: Alarm
Power LED: PWR1, PWR2
Port LED: Link/ACT, Speed
PTP Sync LED: Sync |
|
| Power Requirements |
Power input:
24VDC(18-36VDC)
110VDC(77-154VDC)
100-240VAC,50/60Hz;110-220VDC (85-264VAC/77-300VDC)
Power terminal:
5-pin 5.08 mm-spacing plug-in terminal block
Power consumption<4w
Overload protection: Support
Reverse connection protection: Support
Redundancy protection: Support |
|
| Physical Characteristics |
Housing: Metal
Cooling: Natural cooling, fanless
Protection Class: IP40
Dimensions(WxHxD):
62.4×139×119.5 mm (2.45×5.47×4.70 in.)
Weight: 0.75kg (1.653 pound)
Mounting: Vertical or Horizontal Din-Rail |
|
| Environmental Limits |
Operating temperature: -40°C to +85°C (-40°F-185°F)
Storage temperature: -40°C to +85°C (-40°F-185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing) |
|
| Quality Assurance |
MTBF: 332,600 hrs
Warranty: 5 years |
|
| Approvals |
CE: Models with power supply of L3: 24VDC
UL508: Models with power supply of L3: 24VDC |
|
| Industry Standard |
EMI:
FCC CFR47 Part 15,EN55022/CISPR22,Class A
EMS:
IEC61000-4-2(ESD) ±8kV(contact),±15kV(air)
IEC61000-4-3(RS) 10V/m(80MHz-2GHz)
IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV
IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM;
Data Port:±2kV
IEC61000-4-6(CS) 3V(10kHz-150kHz);
10V(150kHz-80MHz)
IEC61000-4-16(common mode conduction) 30V(cont.),300V(1s)
Machinery:
IEC60068-2-6 (vibration),
IEC60068-2-27 (shock),
IEC60068-2-32 (free fall) |
|
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"
bkaii.com.vn
BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!
