PDS-220FCS-60 Device Server/Progr/1RS232/422/485/Fiber/Sing/60kmcủa hãng ICP-DAS đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. PDS-220FCS -60 được thiết theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông minh, hệ thống kiểm soát an ninh…
Tính năng của sản phẩm:
- Adds optical fiber connectivity to serial devices
- "Virtual COM" extends COM ports
- Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7/8
- Powerful programmable device server
- Watchdog timer suitable for use in harsh environments
- Power Reverse Polarity Protection
- Serial Port +/-4 kV ESD Protection Circuit
- Self-Tuner ASIC controller on the RS-485 port
- RoHS compliant with no Halogen
- Built-in high performance MiniOS7 from ICP DAS
- 100 Base-FX fiber port (SC/ST connectors)
- ODM service Is available
- Low power consumption
- Supports Modbus TCP to RTU/ASCII Gateway
Thông số kỹ thuật của sản phẩm:
Models |
PDS-220FT |
PDS-220FC |
PDS-220FCS |
PDS-220FCS-60 |
System |
CPU |
80186-80 MHz or compatible |
SRAM |
512 KB |
Flash Memory |
Flash ROM: 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles |
Built-in Watchdog Timer |
Yes |
LED Indicators |
Sys, Link/Act |
NIT Pin |
Yes |
Interface |
Fiber Port |
100 Base-FX (ST connector) |
100 Base-FX (SC connector) |
100 Base-FX (SC connector) |
100 Base-FX (SC connector) |
Mode |
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm
Wavelength : 1300 or 1310nm Min. TX Output:- 20 dBm Max. TX Output: -14 dBm Max. RX Sensitivity: -32 dBm Min. RX Overload: -8 dBm Budget: 12 dBm
|
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm
Wavelength: 1300 or 1310nm Min. TX Output: - 15 dBm, Max. TX Output: -8 dBm Max. RX Sensitivity: -34 dBm, Min. RX Overload: -5 dBm Budget: 19 dBm
|
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm
Wavelength: 1300 or 1310nm Min. TX Output: - 5 dBm, Max. TX Output: 0 dBm Max. RX Sensitivity: -35 dBm, Min. RX Overload: -5 dBm Budget: 30 dBm
|
Distance |
2 km, (62.5/125 μm recommended) for full duplex |
30 Km, (9/125 μm recommended) for full duplex |
60 Km, (9/125 μm recommended) for full duplex |
Serial Port |
COM1 |
Male DB-9, 5-wire RS-232 (RxD, TxD, CTS, RTS, GND) Note: +/- 4 kV ESD Protection |
COM2 |
Removable Terminal Block, 2-wire RS-485 (D+, D-, GND) with Self-tuner ASIC or 4-wire RS-422 (TxD+, TxD-, RxD+, RxD-, GND) Note: +/- 4 kV ESD Protection |
RS-485 |
Bias Resistor |
Yes, 1 KΩ |
Node |
254 (max.) |
COM Port Format |
Data Bit |
7, 8 |
Parity |
None, Even, Odd, Mark, Space |
Stop Bit |
1.2 |
UART |
16c550 or compatible |
Baud Rate |
115200 bps Max. |
LED Indicators |
Link/Act |
Green |
System |
Red |
Power |
Protection |
Power reverse polarity protection |
Input Range |
+12 ~ +48 VDC (non-regulated) |
Power Consumption |
0.14 A @ 24 VDC |
Frame GND |
Yes (for EMS Protection) |
Mechanism |
Flammability |
Fire Retardant Materials (UL94-V0 Level) |
Dimension (W x H x D) |
31 mm x 121 mm x 157 mm |
31 mm x 123 mm x 157 mm |
Installation |
DIN-Rail mounting |
Casing |
Fire Retardant Plastic |
Environment |
Operating Temperature |
-25 ~ +75 °C |
Storage Temperature |
-30 ~ +85 °C |
Humidity |
10 ~ 90% RH, non-condensing |
PDS-220FT CR |
Programmable Device Server with Modbus Gateway, 1 RS-232, 1 RS-422/485 and 1 Multi-mode ST Fiber Ports (RoHS) |
PDS-220FC CR |
Programmable Device Server with Modbus Gateway, 1 RS-232, 1 RS-422/485 and 1 Multi-mode SC Fiber Ports (RoHS) |
PDS-220FCS CR |
Programmable Device Server with Modbus Gateway, 1 RS-232, 1 RS-422/485 and 1 Single-mode SC Fiber Ports (RoHS) |
PDS-220FCS-60 CR |
Programmable Device Server with Modbus Gateway, 1 RS-232, 1 RS-422/485, and 1 Single-mode SC Fiber Ports (RoHS) |
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"