IES615-2D(RS-485): Switch công nghiệp hỗ trợ 5 cổng Ethernet tốc độ 10/100 Base-T(X) và 2 cổng Serial RS422/485

Standard

&

Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX and 100Base-FX

IEEE 802.3x for Flow Control

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

Console/Telnet/WEB Management, SNMP v1/v2c Centralized Management of Equipment, Port Mirroring, QoS, File Management, Port Statistics

Classification of User Permissions, Relay Alarm (Port Alarm and Power Supply Alarm)

802.1Q Vlan, Static Port Aggregation, Bandwidth Management, Flow Control

Unicast / Multicast

Redundancy

Protocol

SW-Ring, RSTP

2 serial port servers, each one supports 4 TCP or UDP session connections. Multiple operating modes: TCP Server, TCP Client, UDP, TCP auto, Realcom, advanced TCP Server and advanced UDP

Copper port: 10/100Base-T(X)RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning

Console port: CLI command line management port (RS-232), RJ45

Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output, current carrying capacity 1A@24VDC or 0.5A@120VAC>

Serial Port

RS-232 signal: TXD, RXD, RTS, CTS, DTR, DSR, GND

RS-422 signal: T+, T-, R+, R-, GND

RS-485 signal: D+, D-, GND

Check bit: None, Even, Odd, Space, Mark

Data bit: 5bit, 6bit, 7bit, 8bit

Stop bit: 1bit, 1.5bit, 2bit

Baud rate: 300-115200bps

Interface form: RS-232 port DB9 male connector

RS-485/422 port 5-pin terminal blocks

Load capacity: RS-485/422 port supports 32-node polling environment (128-node could be customized)

Direction control: RS-485 adopts automatic data flow control technology 

RS-232 port protection: electrostatic protection 15kV

RS-485/422 port protection: isolation voltage 2kV, electrostatic protection 15kV

Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator

Switch

Property

Transmission mode: store and forward

MAC address: 2K

Packet buffer size: 0.5Mbit

Backplane bandwidth: 1.2G

Switch time delay: <15μs

Power

Requirement

12~48VDC, 4-pin 7.62mm pitch terminal blocks

Dual power supply redundancy, non-polarity, reverse connection protection

Support built-in 3.0A over-current protection

Environmental 

Limit

Storage temperature range: -40~85℃

Relative humidity: 5%～95%（no condensation）

Housing: IP30 protection, metal

Installation: DIN-Rail mounting or wall mounting

Dimension (W x H x D): 53mm×136mm×105mm

Industrial

Standard

IEC 61000-4-2 (ESD), Level 4

lAir discharge: ±15kV

lContact discharge: ±8kV

IEC 61000-4-3(RS), Level 3, 10v

IEC 61000-4-4 (EFT), Level 4

lPower supply: ±4kV

lEthernet port: ±2kV

lRelay: ±4kV

IEC 61000-4-5 (Surge), Level 4

lPower supply /Relay: common mode±4kV, differential mode±2kV

lEthernet port: ±4kV；

IEC 61000-4-6(CS), Level 3, 10v

Shock: IEC60068-2-27

Free fall: IEC60068-2-23

Vibration: IES 60068-2-6