GW1101-1D(RS-485)-TB-P (12-48VDC) là Modbus Gateway công nghiệp của 3Onedata, cho phép chuyển đổi linh hoạt giữa Modbus TCP và Modbus RTU/ASCII, giúp kết nối hiệu quả giữa hệ thống Ethernet và mạng serial RS485/RS422 trong các ứng dụng tự động hóa.
Thiết bị được trang bị 1 cổng Ethernet 10/100M và 1 cổng RS485/RS422, hỗ trợ nhiều chế độ hoạt động như Master/Slave, giúp dễ dàng tích hợp với PLC, HMI, SCADA và các hệ thống IoT công nghiệp. Người dùng có thể cấu hình nhanh chóng thông qua Web hoặc Telnet, tối ưu quá trình triển khai thực tế.
Nếu bạn đang tìm hiểu tổng quan về các chuẩn truyền thông công nghiệp, có thể tham khảo thêm RS232/RS485/RS422 là gì? hoặc giao thức Modbus trong công nghiệp để hiểu rõ cách thiết bị gateway hoạt động trong hệ thống.
Ngoài ra, bạn có thể xem thêm danh sách Modbus Gateway và bài viết top Modbus Gateway phổ biến để lựa chọn giải pháp phù hợp với nhu cầu triển khai thực tế.
Xem video sản phẩm: https://www.youtube.com/shorts/5A92mdaRrUY
Tính năng của sản phẩm:
1. Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol
2. Support 1 port 10/100M Ethernet
3. Support 1 Port RS-485/422
4. Support WEB and Telnet configuration
5. Convert between Modbus TCP and Modbus RTU/ASCII
6. Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes
7. Support ID mapping function, to achieve the management of the host ID
8. 300bps~115200bps baud rate and nonblocking communication
9. Support IP address and MAC address filtering function
10. Slave mode support 16 TCP master connections
11. Master mode support 32 slave TCP connection requests
12. Support Response Timeout and Interval Timeout setting
13. Support cross-gateway and cross-router communication
14. IP30 protection grade, metal shell, wall mounted installation
15. No fan, low consumption design
16. Working temperature: -40~75℃
Thông số kỹ thuật của sản phẩm:
|
Ethernet Port
|
Standard: 10Base-T, 100Base-TX
Protocol: Modbus TCP, TCP, IP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS
Rate: 10/100M automatic flow control, MDI/MDI-X autotunning
Interface quantity: 1
Interface form: RJ45
Duplex mode: full/half duplex mode self-adaption
|
| Serial Port |
Standard: EIA RS-232C, RS-485, RS-422
Protocol: Modbus RTU/ASCII
Quantity of serial port: 1 RS-232 or RS-485/422 serial port
RS-232 signal: RXD, TXD, DTR, GND, DSR, RTS, CTS, DCD
RS-485 signal: D+, D-, GND
RS-422 signal: T+, T-, GND, R+, R-
Baud rate: 300-115200bps
Data bit: 5bit, 6bit, 7bit, 8bit
Parity bit: None, Even, Odd, Space, Mark
Stop bit: 1bit, 2bit
Interface form: RS-232, adopt RJ45;
RS-485/422, adopt 5 pins 5.08mm pitch terminal blocks
Flow control: RTS/CTS, DTR/DSR, XON/XOFF
Pull high/low resistor for RS-485: 4.7 kΩ
Operating mode: RTU Master, RTU Slave, ASCII Master and ASCII Slave
Connection quantity: up to 32 TCP Slave requests are supported under Master mode
up to 16 TCP Master connections are supported under Slave mode
|
| Configuration |
WEB configuration management, TELNET configuration, Windows configuration tool
|
| Security |
Classification of User Permissions, IP address filtering, MAC address filtering, WEB Console, TELNET Console
|
|
Indicator
|
Power supply indicator, Ethernet port indicator, serial port indicator |
|
Power
Requirement
|
9~48VDC, 2 pins 5.08mm pitch terminal blocks
|
|
Power
Consumption
|
GW1101-1D(RS-232)
No-load: 0.53W@24VDC>
Full-load: 0.77W@24VDC>
GW1101-1D(RS-485)
No-load: 0.86W@24VDC>
Full-load: 1.15W@24VDC>
|
|
Environmental
Limit
|
Operating temperature range: -40~75℃
Storage temperature range: -40~85℃
Relative humidity: 5%~95%(no condensation)
|
|
Physical
Characteristic
|
Housing: IP40 protection, metal
Installation: wall mounting
Dimension (W x H x D): 69mm×22mm×100mm
Weight: 230g
|
|
Industrial
Standard
|
IEC 61000-4-2 (ESD, Electro-static Discharge), Level 3
Air discharge: ±8kV
Contact discharge: ±6kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
|
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"