IDS-205F: Managed Industrial Ethernet Switch with Fiber 4 x 10/100/1000Base-T RJ45 and 1 x 100Base-X SC/ST

Giá: Liên hệ

IDS-205F Managed Industrial Ethernet Switch with Fiber 4x 10/100/1000Base-T RJ45 and 1x 100Base-X SC/STcủa hãng Perle hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. IDS-205F được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, …

Bộ chuyển đổi Quang điện

Tính năng của sản phẩm:

4 port 10/100/1000Base-T ( RJ45 ) for Gigabit and Fast Ethernet devices
1 port 100Base-X SC/ST fiber connection
IP Manageability, VLAN and resiliency management
Compact, corrosion resistant case attaches to a standard DIN Rail
Redundant dual power input 12/24/48 VDC
Out-of-band management via RJ45
Programmable Controller safety and Hazardous Location Certification
-40 to 75C industrial operating temperature ( XT Models )

Thông số kỹ thuật của sản phẩm:

Power
Dual Power Input	Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 12/24/48 VDC Nominal. (9.6 to 60 VDC)
Power Connector	4-Pin Removable Terminal Block. Grounding screw on metal chassis
Maximum Current Consumption @24 vDC	0.14 amps
Maximum Power Consumption @24 vDC	3.4 watts
Access Ports
RJ45	4 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V
RJ45 Serial Console port	RJ45 DTE Optional rolled and straight thru RJ45 cables and DB adapters are available
Fast Ethernet Fiber port	100Base-x fiber port models Duplex SC or ST connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable Simplex (BIDI, single strand) SC or ST connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable PC and UPC type patch cords supported.

Switch Properties
Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T Energy Efficient Ethernet (EEE) as per 802.3az. IEEE 802.3x for Flow Control
Processing Type	Store and Forward
MAC Address Table Size	8K
VLAN ID range	1 to 4000
IGMP groups	1024
Packet Buffer Memory	1 Mbit
Jumbo Frame Size	10 KB
Indicators
Power	This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs
System	Indicates whether the switch O/S is operating normally
RJ45 Ethernet	These integrated colored LEDs indicate link, activity and speed for each port.
Fiber Link	Fiber link LED indicates Link and Data Activity
Alarm	The alarm LED (Red) will be turned on under alarm conditions
P-Ring Master LED	Status of the P-Ring Master
Backup Network Coupling	Indicates whether or not the “Backup Network Coupling” feature is enabled (Redundant links connecting two P-Ring networks)
Environmental Specifications
MTBF	277,426 Hours Calculation model based on MIL-HDBK-217-FN2 @ 30 °C
Operating Temperature Ranges	Standard temperature models (Std): -10° C to 60° C (14° F to 140° F). XT Industrial extended temperature models (Ind) : -40° C to 75° C (-40 F to 167° F)
Storage Temperature Range	Minimum range of -25° C to 70° C (-13° F to 158° F). -40 C to 85 C (-40 F to 185 F) for industrial extended temperature models
Operating Humidity Range	5% to 90% non-condensing
Storage Humidity Range	5% to 95% non-condensing
Maximum Heat Output	11.6 Btu/hr
Operating Altitude	Up to 3,048 meters (10,000 feet)
Product Weight and Dimensions
Weight	0.61kg (1.34 lbs)
Dimensions	45 x 130 x 121mm

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"

Downloads ids-205f-switches-bkaii.pdf