RGS-PR9000-LV: Switch công nghiệp Layer-3

Giá: Liên hệ

RGS-PR9000-LV Switch công nghiệp Layer-3 hỗ trợ tiêu chuẩnIEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots của hãng ORing-Đài Loan hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. RGS-PR9000-LV thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh…

Switch công nghiệp

Tính năng của sản phẩm:

Designed for power substation / Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613
Modular designed makes network planning easy
Supports Layer 3 routing, RIP and static routing function
Supports GRE (Generic Routing Encapsulation) tunneling protocol
Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) for Ethernet Redundancy
O-Chain allow multiple redundant network rings
Support IEEE 1588v2 clock Synchronization

Thông số kỹ thuật của sản phẩm:

Specifications
ORing Switch Model	RGS-PR9000-LV	RGS-PR9000-HV
Physical Ports
Slot Number	4 (up to 3 slots for 8x1G ports and 1 slot for 4x10G port)
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3ae for 10Gigabit Ethernet IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table	32K
Priority Queues	8
Processing	Store-and-Forward
Switch Properties	Switching latency: 7 us Switching bandwidth: 128Gbps Max. Number of Available VLANs: 4095 VLAN ID Range : 1 to 4094 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define
Jumbo frame	Up to 10K Bytes
Security Featues	Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) MAC-based authentication MAC address limit VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security Web and CLI authentication and authorization IP source guard
Software Features	Hardware routing, RIP and static routing IEEE 1588v2 clock synchronization IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static) Multiple Registration Protocol (MRP) MSTP (RSTP/STP compatible) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP v2/v3 Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client DHCP Relay Modbus TCP SMTP Client SNTP Server
Network Redundancy	O-Ring O-Chain *note MRP MSTP(RSTP/STP compatible)
RS-232 Serial Console Port	RS-232 in RJ-45 connector with console cable. 115200bps, 8, N, 1
LED Indicators
Power Indicator (PWR)	Green : Indicates that the system ready. The LED is blinking when the system is upgrading firmware
Power Indicator (PWR1 / PWR2)	Green : Power LED x 2
Ring Master Indicator (R.M.)	Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)	Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault)	Amber : Indicate unexpected event occurred
Reset To Default Running Indicator (DEF)	Green : System resets to default configuration
Supervisor Login Indicator (RMT)	Green : System is accessed remotely
Smart LED Display system	Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4 Mode select Button (MODE) : Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button Port 1 ~ 28 Link/Act(LK/ACT) LED show : Green x 28
Fault Contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Redundant power input modular	Dual 24/48VDC (24~72VDC) power inputs at terminal block (Note 2)	Dual 100~240VAC / 100~370VDC power inputs at terminal block
Power Consumption (Typ.)	46Watts max.	43.5Watts max.
Overload Current Protection	Present
Physical Characteristics
Enclosure	19 inches rack mountable
Dimensions (W x D x H)	440 (W) x 325 (D) x 44 (H) mm (17.32x12.8x1.73 inches)
Weight (g)	6450 g	6600 g
MTBF(mean time between failures)
Time	246,537hrs (Note 1)	246,537hrs (Note 1)
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	24VDC~36VDC 10G SFP+ module absent : -40 to 75°C	10G SFP+ module absent : -40 to 85°C 10G SFP+ module used: -20 to 60 °C
	24VDC~36VDC 10G SFP+ module used: -20 to 50 °C
	36VDC~72VDC 10G SFP+ module absent : -40 to 85°C
	36VDC~72VDC 10G SFP+ module used: -20 to 60 °C
Operating Humidity	5% to 95% Non-condensing

Các bài viết tham khảo:

"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"

Downloads datasheet-rgs-pr9000-lv-bkaii.pdf