bkaii.com.vn BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!

XPress-Pro SW 92000: Switches offer eight 10/100 Ethernet ports and an optional fiberoptic interface

Giá: Liên hệ

Nút thêm vào giỏ hàng sẽ xuất hiện sau khi bạn chọn các giá trị ở trên

XPress-Pro SW 92000 Switches offer eight 10/100 Ethernet ports and an optional fiberoptic interface của hãng Lantronix hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam.XPress-Pro SW 92000 được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh, …

Switch công nghiệp

Tính năng của sản phẩm:

Unmanaged rugged Ethernet switches
DIN-rail mountable
Compliant with IEC61000-6-2 EMC generic immunity standard for the industrial environment
Full wire-speed forwarding rate
Alarms for power failure by relay output (8-port only)
Fiberoptic interfaces
2048 MAC addresses
768 kilobit buffer memory
Redundant 2A max, 10 to 48 VDC power inputs
Wide -34° to 74° C (-29° to 165° F) operating temperature range
Hardened aluminum case
Supports DIN-rail, panel, or rack-mounting installation
Comply with NEMA TS1 and TS2 environmental requirements
for traffic control equipment
Alarms for power and port link failure by relay output
UL 1604 Class 1, Division 2 classified for use in hazardous locations

Thông số kỹ thuật của sản phẩm:

Designation	100Base-FX
Typical Distance	2 km
Nominal Wavelength	1310 nm
Cable Type	62.5 / 125 MM
Connector	SC
Optical Budget	15 dB
Serial Interface
92000	8-port 10/100Base-TX
Forward and Filtering Rate
92000	148,810 pps for 100 Mbps, 14,880 pps for 10 Mbps
Address Table Size
92000	2048 MAC addresses
Latency
92000	Less than 7.1 μs
Reverse Polarity Protection
92000	n/a
Network Interface
92000	10/100 Mbps full/half-duplex, auto negotiation, auto MDI/MDIX
LED Indicators
92000	Per Unit: Power Status (Power 1, Power 2)Per Port: 10/100TX, 100FX:Link/Activity (Green), Speed (Yellow), Fault (Red)
Management
92000	n/a
Alarm Contact
92000	One relay output with current 1A @ 24 VDC
Standards
92000	IEEE802.3 10Base-T, IEEE802.3u 100 Base-TX/100Base-FX, IEEE802.3x
Power
92000	Input Voltage: 10 to 48 VDCInput Current: 1.5A max.Power Consumption: 24 VDC @ 0.55A, 18.48 W max.
Environmental
92000	Operating Temperature: -34° to 74° ° C (-29° to 165° F)Storage Temperature:-40° to 85° C (-40° to 185° F)Humidity: 10% to 95% relative humidity (non-condensing)
Protocols Supported
92000	n/a
Packet Buffer Memory
92000	768 Kb
Packaging
92000	Aluminum case with DIN-rail, or panel mounting
Dimensions
92000	50 mm W x 110 mm D x 136 mm H(1.97″ W x 4.33″ D x 5.35″ H)
Weight
92000	0.8 Kg (1.76 lb)
Processing Types
92000	Store-and-forwardHalf-duplex back-pressure and IEEE802.3x full-duplex flow control
Standards
92000	IEEE802.3 10Base-T, IEEE802.3u 100 Base-TX/100Base-FX, IEEE802.3x
Regulatory Approvals
Emission Compliance	FCC Part 15, Class A
ISO	92000: Manufactured in an ISO9001 facility
Safety	52000: UL 6095092000: UL 60950, EN 60950, IEC 60950, IEC 61000-6-2, UL 1604: Classified for ITE Equipment for use in hazardous locations: Class 1, Division 2 group A, B, C & D:Temp Code T4A; -25C° < Tamb < 74C°
CE Approval	52000: n/a92000: EN55022 (CISPR22 Class A), EN55024 (CISPR24 Class A)
ESD Standards (IEC 61000-4-2)
92000	Enclosure Contact: + / – 4 kV; Criteria B, Enclosure Air: + / – 8 kV; Criteria B
Radiated FRI Standards (IEC 61000-4-3)
92000	Enclosure Ports: 10 V/m, 80 to 1000 MHz; Criteria A
Burst Standards (IEC 61000-4-4)
92000	Enclosure Ports: + / – 4 kV @ 2.5 KHz; Criteria B, DC Power Ports: + / – 4 kV; Criteria B, AC Power Ports: + / – 4 kV; Criteria B
Surge Standards (IEC 61000-4-5)
92000	Signal Ports: + / – 1 kV; Line-to-earth; Criteria B, DC Power Ports: + / – 0.5 kV; Line-to-earth; Criteria B AC Power Ports: + / – 2 kV; Line-to-earth; Criteria B
Induced RFI Standards (IEC 61000-4-6)
92000	Signal Ports: 10V @ 0.15 – 80 MHz; Criteria A, DC Power Ports: 10V @ 0.15 – 80 MHz; Criteria AAC Power Ports: 10V @ 0.15 – 80 MHz; Criteria A, Earth Ground Ports: 10V @ 0.15 – 80 MHz; Criteria A
Magnetic Field Standards (IEC 61000-4-8)
92000	Enclosure Ports: 30 A/m @ 50, 60 Hz; Criteria A
Voltage Dip Standards (IEC 61000-4-11)
92000	AC Power Ports: 30% Reduction for 0.5 period; Criteria B
Environmental Test Compliance
92000	(IEC 60068-2-6) Vibration Resistance: 5G @ 150 Hz; Criterion 3 (Operation/Storage/Transport)(IEC 60068-2-27) Shock:• 5 G @ 11 ms (Half-Sine Shock Pulse; Operation)• 50 G @ 11 ms (Half-Sine Shock Pulse; Storage/Transport)(IEC 60068-2-32) Free Fall: 1 M (3.281 ft.)
NEMA TS1/2 Environmental Requirements for Traffic Control Equipment
92000	Yes
Installation Type
92000	DIN Rail (mounting kit is included)Optional wall-mount kit, ordered separately (X9294PMKT-01)

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"

Tải về xpress-pro-92000-bkaii.pdf

M110 Series: Compact and Intelligent Industrial Modems

Giá: Liên hệ

M110 Series Compact and Intelligent Industrial Modems của hãng Lantronix hiện �...

XPress-Pro SW 92000: Switches offer eight 10/100 Ethernet ports and an optional fiberoptic interface

Bài viết mới cập nhật...

Catalog online

FIND US ON: