ioLogik E2200 Series Smart Ethernet remote I/O with Click & Go Logic của hãng Moxa hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam.ioLogik E2200 Series được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh,…
Tính năng của sản phẩm:
- Front-end intelligence with patented Click&Go control logic, up to 24 rules
- Active communication with MX-AOPC UA Server
- Saves time and wiring costs with peer-to-peer communications
- Supports SNMP v1/v2c/v3
- Friendly configuration via web browser
- Simplifies I/O management with MXIO library for Windows or Linux
- ·Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
Thông số kỹ thuật của sản phẩm:
- Digital Input Channels : ioLogik E2210 Series: 12
- Digital Output Channels : ioLogik E2210 Series: 8
- Rotary Switch : 0 to 9
Digital Inputs
- Connector : Screw-fastened Euroblock terminal
- Counter Frequency : 900 Hz
- Digital Filtering Time Interval : Software configurable
- Dry Contact : On: short to GND
Off: open
- I/O Mode : DI or event counter
- Points per COM : ioLogik E2210 Series: 12 channels
Sensor Type : ioLogik E2210 Series: Dry Contact and Wet Contact (NPN)
Wet Contact (DI to GND) : On: 0 to 3 VDC
Off: 10 to 30 VDC
Digital Outputs
- Connector : Screw-fastened Euroblock terminal
- Current Rating : 200 mA per channel
- I/O Mode : DO or pulse output
- I/O Type : Sink
- Over-Current Protection : 0.65 A per channel @ 25°C
- Over-Temperature Shutdown : 175°C (min.)
- Over-Voltage Protection : 45 VDC (typical)
- Pulse Output Frequency : 1 kHz
- DIO Output Leakage Current : 4.0 mA @ 24 VDC
Relays
- Connector : Screw-fastened Euroblock terminal
- Contact Current Rating : Inductive load: 2 A @ 30 VDC, 250 VAC, 110 VAC
Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC
- Contact Resistance : 100 milli-ohms (max.)
- Electrical Endurance : 100,000 operations @ 5 A resistive load
- Mechanical Endurance : 1,000,000 operations
- Minimum Permitted Load : 1 A @ 5 VDC
- Pulse Output Frequency : 0.3 Hz at rated load
- Type : Form A (N.O.) power relay
- I/O Mode : Relay or pulse output
Analog Inputs
- Connector : Screw-fastened Euroblock terminal
- I/O Mode : Voltage/Current
- I/O Type : Differential
- Resolution : 16 bits
- Built-in Resistor for Current Input : 120 ohms
- Over-Voltage Protection : -25 to +30 VDC (power on)
-35 to +35 VDC (power off)
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector) : 1
- Magnetic Isolation Protection : 1.5 kV (built-in)
Ethernet Software Features
- Configuration Options : Web Console (HTTP), Windows Utility (ioAdmin)
- Industrial Protocols : CGI commands, Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library, SNMPv1 Trap, SNMPv1/v2c/v3
- Management : BOOTP, IPv4, SMTP, DHCP Client, HTTP, TCP/IP
- MIB : Device Settings MIB
- Time Management : SNTP
Modbus TCP
- Functions Supported : 1, 2, 3, 4, 5, 6, 15, 16
- Mode : Server (Slave)
Serial Interface
- Connector : Terminal block
- Serial Standards : RS-485
- No. of Ports : 1
- Baudrate : 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
- Parity : None
- Data Bits : 8
- Stop Bits : 1
Serial Signals
- RS-485-2w : Data+, Data-, GND
Serial Software Features
- Industrial Protocols : Modbus RTU Server (Client)
Power Parameters
- Power Connector : Screw-fastened Euroblock terminal
- No. of Power Inputs : 1
- Input Voltage : 12 to 36 VDC
MTBF
- Time : ioLogik E2210 Series: 213,673 hrs
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"