tPET-PD2POR2 Tiny Ethernet module with PoE, 2-ch DI (Dry Contact) and 2-ch Form-A PhotoMos relay (RoHS) củahãng ICP-DAS hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. tPET-PD2POR2 được thiết theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông minh, hệ thống kiểm soát an ninh…
Tính năng của sản phẩm:
- Cost-effective Ethernet I/O modules (Modbus TCP/UDP slave)
- Contains a 32-bit MCU that efficiently handles network traffic
- 10/100 Base-TX Ethernet, RJ-45 x1 (Auto-negotiating, Auto MDI/MDIX, LED Indicator)
- Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC input
- Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols
- Supports UDP responder for device discovery
- Supports web configuration and firmware update via Ethernet
- Isolated digital input and output
- Supports latched DI and 32-bit high-speed counter functions
- Supports I/O pair-connection through the Ethernet
- Dual-watchdog with power-on and safe value
- Tiny form-factor with easy DIN-Rail mounting
- RoHS compliant, no Halogen
- Low power consumption (about 1.7 W only)
Thông số kỹ thuật của sản phẩm:
Models |
tET-P2POR2/tET-PD2POR2 tET-P2R2/tET-PD2R1 |
tPET-P2POR2/tPET-PD2POR2 tPET-P2R2/tPET-PD2R1 |
System |
CPU |
32-bit MCU |
Dual Watchdog |
Yes |
Communication |
Ethernet Port |
10/100 Base-TX, 8-Pin RJ-45 x1, (Auto-negotiating, Auto-MDI/MDIX, LED indicator) |
- |
PoE (IEEE 802.3af, Class 1) |
LED Display |
S1 |
- |
PoE indicator (Green) |
System indicator (Red) |
E1 |
Link/Act indicator (Green) |
10/100 M indicator (Yellow) |
Mechanical |
Dimensions |
52 mm x 27 mm x 98 mm |
Installation |
DIN-Rail mounting |
Environment |
Operating Temperature |
-25 °C ~ +75 °C |
Storage Temperature |
-30 °C ~ +80 °C |
Humidity |
10 ~ 90 % RH, non-condensing |
Power Requirements |
Power Input |
- |
PoE: IEEE 802.3af, Class 1 |
Terminal block: +12 ~ 48 VDC (non-regulated) |
Power Consumption |
0.04 A @ 24 VDC for tET-P2R2 |
0.03 A @ 48 VDC for tPET-P2R2 |
Models |
tET-PD2POR2/tPET-PD2POR2 tET-PD2R1/tPET-PD2R1 |
tET-P2POR2/tPET-P2POR2 |
tET-P2R2/tPET-P2R2 |
Digital Input |
Input Channels |
2 |
Input Type (Device) |
Dry Contact (Source) |
Wet Contact (Sink, Source) |
On Voltage Level |
Close to GND |
+10 VDC ~ +50 VDC |
Off Voltage Level |
Open |
+4 VDC max. |
Input Impedance |
- |
10 k Ohm |
Counters |
Max. Count |
4,294,967,285 (32 bits) |
Min. Pulse Width |
0.15 ms |
Frequency Measurement |
3.5 kHz (without filter) |
Overvoltage Protection |
- |
+70 VDC |
Isolation |
3750 Vrms |
Effective Distance |
500 M max. |
- |
Models |
tET-P2POR2/tPET-P2POR2 tET-PD2POR2/tPET-PD2POR2 |
tET-P2R2 tPET-P2R2 |
tET-PD2R1 tPET-PD2R1 |
Relay Output |
Output Channels |
2 |
2 |
1 |
Output Type (Module) |
PhotoMOS Relay, Form A |
Power Relay, Form A (SPST N.O.) |
Load Voltage |
60 VDC/VAC |
250 VAC/30 VDC |
Max. Load Current |
60 V/1.0 A (Operating Temperature -25°C ~ -40°C) |
5.0 A/channel at 25°C |
60 V/0.8 A (Operating Temperature +40°C ~ +60°C) |
60 V/0.7 A (Operating Temperature +60°C ~ +75°C) |
Operate Time |
1.3 ms (Typical) |
6 ms |
Release Time |
0.1 ms (Typical) |
3 ms |
PWM |
100 Hz Max. (High/Low duty cycle range = 5 ~ 65,535 ms) |
50 Hz Max. (High/Low duty cycle range = 10 ~ 65,535 ms) |
Electrical Life (Resistive load) |
VED |
Long Life and No Sparking |
5 A 250 VAC 30,000 ops (10 ops/minute) at 75 °C |
5 A 30 VDC 70,000 ops (10 ops/minute) at 75 °C |
UL |
5 A 250 VAC/30 VDC 6,000 ops |
3 A 250 VAC/30 VDC 100,000 ops |
Mechanical Life |
- |
20,000,000 ops. At no load (300 ops./ minute) |
Isolation |
3000 Vrms |
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"