IES615-1F-2DI(3IN1): Switch công nghiệp hỗ trợ 4 cổng Ethernet tốc độ 10/100Base-T(X), 2 cổng 3IN1 Serial và 1 cổng Quang tốc độ 100Base-FX

Standard&

Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX and 100Base-FX

IEEE 802.3x for Flow Control

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

Console/Telnet/WEB Management, SNMP v1/v2c Centralized Management of Equipment, Port Mirroring, QoS, File Management, Port Statistics

Classification of User Permissions, Relay Alarm (Port Alarm and Power Supply Alarm)

802.1Q Vlan, Static Port Aggregation, Bandwidth Management, Flow Control

Unicast / Multicast

Redundancy

Protocol

SW-Ring, RSTP

2 serial port servers, each one supports 4 TCP or UDP session connections. Multiple operating modes: TCP Server, TCP Client, UDP, TCP auto, Realcom, advanced TCP Server and advanced UDP

Copper port: 10/100Base-T(X)RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning

Fiber port: 100Base-FX

Console port: CLI command line management port (RS-232), RJ45

Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output, current carrying capacity 1A@24VDC or 0.5A@120VAC>

Serial Port

RS-232 signal: TXD, RXD, GND

RS-422 signal: T+, T-, R+, R-, GND

RS-485 signal: D+, D-, GND

Check bit: None, Even, Odd, Space, Mark

Data bit: 5bit, 6bit, 7bit, 8bit

Stop bit: 1bit, 1.5bit，2bit

Baud rate: 300-115200bps

Interface form: 5-pin terminal blocks

Load capacity: RS-485/422 port supports 32-point polling environment(128-point could be customized)

Direction control: RS-485 adopts automatic data flow control technology

Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator

Switch

Property

Transmission mode: store and forward

MAC address: 2K

Packet buffer size: 0.5Mbit

Backplane bandwidth: 1.2G

Switch time delay: <15μs

Power

Requirement

12~48VDC, 4-pin 7.62mm pitch terminal blocks

Dual power supply redundancy, non-polarity, reverse connection protection

Support built-in 3.0A over-current protection

Environmental 

Limit

Operating temperature range: -40~75℃

Storage temperature range: -40~85℃

Relative humidity: 5%～95%（no condensation）

Housing: IP40 protection, aluminum housing

Installation: DIN-Rail mounting or wall mounting

Dimension (W x H x D): 53mm×138mm×110mm

Industrial

Standard

IEC61000-4-2 (ESD), Level 3

lAir discharge: ±8kV

lContact discharge: ±6kV

IEC61000-4-4 (EFT), Level 3

lPower supply: ±2kV

lEthernet port: ±2kV

lRelay: ±2kV

IEC61000-4-5 (Surge), Level 3

lPower supply /Relay: common mode±2kV, differential mode±1kV；

lEthernet port: ±2kV；

Shock: IEC60068-2-27

Free fall: IEC60068-2-23

Vibration: IES 60068-2-6