At the heart of all the new products is our new BLE Module model# MB-N2. It houses the Nordic nRF52832, an on-board antenna and other components special tuning for great performance and low power consumption.
The module provides all GPIO pins and supports all advance features offer by Nordic nRF52832.
With your support, we will get our module certified for CE, FCC and Bluetooth. If you use this module for your own products, not only you have the assurance, you will also save some cost on your own product certifications.
We launched our first BLE Nano in 2014 and it is our most popular product. We design Nano 2 as a ‘drop-in’ replacement, with exactly the same form factor, and in most instances no need to change firmware code. In addition, the new development board also offers a U.FL connector for an external NFC antenna, while users will benefit from the extra processing power and hardware resources of the nRF52832 SoC.
Technical Details
| Dimensions |
0mm x 0mm x 0mm |
| Weight |
G.W 6g |
| Battery |
Exclude |
Part List
ECCN/HTS
| ECCN |
3A991.a |
| HSCODE |
8543709990 |
Thông số kĩ thuật
The SPBTLE-RF is an easy to use Bluetooth® low energy master/slave network processor module, compliant with Bluetooth v4.1. The SPBTLE-RF module supports multiple roles simultaneously, and can act at the same time as Bluetooth low energy sensor and hub device.
The entire Bluetooth low energy stack and protocols are embedded into SPBTLE-RF module. The external host application processor, where the application resides, is connected to the SPBTLE-RF module through a standard SPI interface.
The SPBTLE-RF module provides a complete RF platform in a tiny form factor. Radio, antenna, high frequency and LPO oscillators are integrated to offer a certified solution to optimize the time to market of the final applications.
The SPBTLE-RF can be powered directly with a standard 3 V coin cell battery, a pair of AAA batteries or any power source from 1.7 to 3.6 V.
Key Features
- Bluetooth v4.1 compliant
- Supports master and slave modes
- Multiple roles supported simultaneously
- Embedded Bluetooth low energy protocol stack
- GAP, GATT, SM, L2CAP, LL, RFPHY
- Bluetooth low energy profiles provided separately
- Bluetooth radio performance:
- Embedded ST BlueNRG-MS
- Tx power: + 4 dBm
- Rx sensitivity: - 88 dBm
- Provides up to 92 dB link budget with excellent link reliability
- Host interface
- SPI, IRQ, and RESET
- On-field stack upgrading available via SPI
- AES security co-processor
- Certification
- CE qualified
- FCC, IC modular approval certified
- BQE qualified
- On-board chip antenna
- Operating supply voltage: from 1.7 to 3.6 V
- Operating temperature range: -40 °C to 85 °C
"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"
bkaii.com.vn
BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!
