AWK-1137C-US Thiết bị không dây 802.11a/b/g/n, nhiệt độ hoạt động từ 0 đến 60°Ccủa hãng Moxa-Taiwan được BKAII đang phân phối rộng rãi tại thị trường Việt Nam. AWK-1137C-US được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh,…
Tính năng của sản phẩm:
- IEEE 802.11a/b/g/n compliant client
- Comprehensive interfaces with one serial port and two Ethernet LAN ports
- Easy setup and deployment with AeroMag
- 2x2 MIMO future-proof technology
- Easy network setup with Network Address Translation (NAT)
- Integrated robust antenna and power isolation
- Anti-vibration design
- Compact size for your industrial applications
Thông số kỹ thuật của sản phẩm:
WLAN Interface
- WLAN Standards : 802.11a/b/g/n
802.11i Wireless Security
- Modulation Type : DSSS
OFDM
MIMO-OFDM
- Frequency Band for US (20 MHz operating channels) : 2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.745 to 5.825 GHz (5 channels)
- Frequency Band for EU (20 MHz operating channels) : 2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
- Frequency Band for JP (20 MHz operating channels) : 2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
- Wireless Security : WEP encryption (64-bit and 128-bit)
WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
WPA/WPA2-Personal
- Transmission Rate : 802.11b: 1 to 11 Mbps
802.11a/g: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps
- Transmitter Power for 802.11a : 23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
20±1.5 dBm @ 48 Mbps
18±1.5 dBm @ 54 Mbps
- Transmitter Power for 802.11n (5 GHz) : 23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
18±1.5 dBm @ MCS7/15 40 MHz
- Transmitter Power for 802.11b : 26±1.5 dBm @ 1 Mbps
26±1.5 dBm @ 2 Mbps
26±1.5 dBm @ 5.5 Mbps
25±1.5 dBm @ 11 Mbps
- Transmitter Power for 802.11g : 23±1.5 dBm @ 6 to 24 Mbps
22±1.5 dBm @ 36 Mbps
20±1.5 dBm @ 48 Mbps
19±1.5 dBm @ 54 Mbps
- Transmitter Power for 802.11n (2.4 GHz) : 23±1.5 dBm @ MCS0/8 20 MHz
17±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
17±1.5 dBm @ MCS7/15 40 MHz
- Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz) : Typ. -69 dBm @ MCS7 20 MHz
Typ. -70 dBm @ MCS15 20 MHz
Typ. -64 dBm @ MCS7 40 MHz
Typ. -66 dBm @ MCS15 40 MHz
Note Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.
- Receiver Sensitivity for 802.11b (measured at 2.437 GHz) : Typ. -89 dBm @ 1 Mbps
Typ. -89 dBm @ 2 Mbps
Typ. -89 dBm @ 5.5 Mbps
Typ. -88 dBm @ 11 Mbps
- Receiver Sensitivity for 802.11g (measured at 2.437 GHz) : Typ. -88 dBm @ 6 Mbps
Typ. -88 dBm @ 9 Mbps
Typ. -88 dBm @ 12 Mbps
Typ. -87 dBm @ 18 Mbps
Typ. -84 dBm @ 24 Mbps
Typ. -81 dBm @ 36 Mbps
Typ. -77 dBm @ 48 Mbps
Typ. -75 dBm @ 54 Mbps
- Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz) : Typ. -70 dBm @ MCS7 20 MHz
Typ. -70 dBm @ MCS15 20 MHz
Typ. -64 dBm @ MCS7 40 MHz
Typ. -65 dBm @ MCS15 40 MHz
- WLAN Operation Mode : Client, Client-Router, Slave, Sniffer
- Antenna : External, 2/2 dBi, Omni-directional
- Antenna Connectors : 2 RP-SMA female
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector) : 2
- Standards : IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.1Q for VLAN Tagging
Ethernet Software Features
- Management : DHCP Server/Client, HTTP, IPv4, LLDP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, Proxy ARP, VLAN, Wireless Search Utility, MXview, MXconfig
- Routing : Port forwarding, Static Route, NAT
- Security : HTTPS/SSL, RADIUS, SSH
- Time Management : NTP Client, SNTP Client
Firewall
- Filter : ICMP, MAC address, IP protocol, Port-based
Serial Interface
- Connector : DB9 male
- Serial Standards : RS-232, RS-422/485, RS-232/422/485
- Operation Modes : Disabled, Real COM, RFC2217, TCP Client, TCP Server, UDP
- Data Bits : 5, 6, 7, 8
- Stop Bits : 1, 1.5, 2
- Parity : None, Even, Odd, Space, Mark
- Flow Control : None, RTS/CTS, XON/XOFF
- Baudrate : 75 bps to 921.6 kbps
- Serial Data Log : 256 KB
Serial Signals
- RS-232 : TxD, RxD, RTS, CTS, DCD, GND, DTR, DSR
- RS-422 : Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w : Data+, Data-, GND
- RS-485-4w : Tx+, Tx-, Rx+, Rx-, GND
LED Interface
- LED Indicators : SYS, LAN1, LAN2, WLAN, Serial
Input/Output Interface
Physical Characteristics
- Housing : Metal
- IP Rating : IP30
- Dimensions : 77.1 x 115.5 x 26 mm (3.04 x 4.55 x 1.02 in)
- Weight : 470 g (1.03 lb)
- Installation : DIN-rail mounting, Wall mounting (with optional kit)
Power Parameters
- Input Voltage : 9 to 30 VDC
- Power Connector : 1 removable 3-contact terminal block(s)
- Power Consumption : 11.7 W (max.)
- Reverse Polarity Protection :Supported
Environmental Limits
- Operating Temperature : Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
- Storage Temperature (package included) : -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity : 5 to 95% (non-condensing)
Standards and Certifications
- EMC : EN 61000-6-2/-6-4, EN 55032/24
- EMI : CISPR 22, FCC Part 15B Class A
- EMS : IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
- Radio : EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-1137C, ANATEL, MIC, NCC, SRRC, WPC, KC, RCM
- Road Vehicles : E mark E1
- Safety : EN 60950-1, UL 60950-1
- Vibration : IEC 60068-2-6
MTBF
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"
bkaii.com.vn
BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!
