IES6312-8GT4GS-P220: Switch công nghiệp quản lý 8 cổng Gigabit Ethernet + 4 cổng Gigabit quang SFP

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3z for 1000Base-X

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

ITU-T G.8032 for ERPS

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1X for 802.1X Authentication

IEEE 802.1AB for LLDP

IEEE 802.3ad for LACP

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

The maximum power of POE port: 30W

PoE power supply pin: V+, V+, V-, V- correspond to Pin 1, 2, 3, 6

Gigabit copper port: 10/100/1000Base-T(X), RJ45, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning

Gigabit fiber port: 1000Base-FX, optional SC/ST/FC interface

SFP slot: 1000Base-SFP, LC

Console port: CLI command line management port (RS-232), RJ45

Alarm port: 6-pin 5.08mm pitch terminal blocks(relay occupies 2 pins), support 1 relay alarm output, the current load capability is 1A@30VDC or 0.3A@125VAC>

Transmission mode: store and forward

MAC address: 8K

Packet buffer size: 4Mbit

Backplane bandwidth: 24G

Switch time delay: <10μs

This series of products provide 4 power supply modes.

The PoE product has two optional power supply schemes:

Scheme 1

Power supply range: 24VDC PoE

Connection mode: 6-pin 5.08mm pitch terminal blocks (power supply occupies 4 pins)

Power supply quantity: dual power supply redundant backup

Connection protection: anti-reverse connection

Over-current protection: 12A

Scheme 2

Power supply input: 48VDC PoE

Connection mode: 6-pin 5.08mm pitch terminal blocks (power supply occupies 4 pins)

Power supply quantity: dual power supply redundant backup

Connection protection: anti-reverse connection

Over-current protection: 5A

Non-PoE product has two optional power supply schemes: 

Scheme 3

Power supply range: 12~48VDC

Connection mode: 6-pin 5.08mm pitch terminal blocks (power supply occupies 4 pins)

Power supply quantity: dual power supply redundant backup

Connection protection: non-polarity

Over-current protection: 3A

Scheme 4

Power supply input: 100~240VAC

Connection mode: 6-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins)

Over-current protection: 5A

Operating temperature range: -40~75℃

Storage temperature range: -40~85℃

Relative humidity: 5%～95% (no condensation)

Housing: IP40 protection, metal

Installation: DIN-Rail or wall mounting

Weight: ≤740g

Dimension (W x H x D): 53mm×138mm×110mm

IEC 61000-4-2 (ESD), Level 3

IEC 61000-4-4 (EFT), Level 3

IEC 61000-4-5 (Surge), Level 3

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6