IES6300-8GT2GS2HS-2P48: Switch công nghiệp quản lý 8 cổng Gigabit Ethernet + 2 cổng Gigabit SFP + 2 cổng 2.5G SFP

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3z for 1000Base-X

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

ITU-T G.8032 for ERPS

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1AB for LLDP

IEEE 802.3ad for LACP

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

The maximum power of PoE port: 30W

The power supply pin of PoE: V+, V-, V+, V- correspond to Pin 1, 2, 3, 6

Gigabit Copper Port: 10/100/1000Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning, optional PoE

Gigabit SFP Slots (optional): 100/1000Base-X self-adaption or specified mode, SFP slot

2.5 SFP slot: 100/1000 self-adaption or 100/1000/2.5GBase-X specified mode, SFP slot

I/O port (optional): support 2 inputs and 2 outputs, 8-pin 3.81mm pitch terminal blocks, support dry contact input relay output

Console port: CLI command line management port(RS-232), RJ45

Transmission mode: store and forward

MAC address: 8K

Packet buffer size: 4Mbit

Backplane bandwidth: 30G

Switch time delay: <10μs

This series product provides 4 power supply methods. PoE product has two optional power supply schemes:

Scheme 1

Power supply range: 24VDC PoE

Connection method: 6-pin 5.08mm pitch terminal blocks (includes 4-pin power supply)

Power supply quantity: dual power supply redundancy backup

Connection protection: anti-reverse connection

Overcurrent protection: 12A

Scheme 2

Power input: 48VDC PoE

Connection method: 6-pin 5.08mm pitch terminal blocks (includes 4-pin power supply)

Power supply quantity: dual power supply redundancy backup

Connection protection: anti-reverse connection

Overcurrent protection: 5A

Non-PoE product has two optional power supply schemes:

Scheme 3

Voltage range: 12~48VDC.

Connection method: 6-pin 5.08mm pitch terminal blocks (includes 4-pin power supply)

Power supply quantity: dual power supply redundancy backup

Connection protection: non-polarity

Overcurrent protection: 3A

Scheme 4

Power supply input: 220VAC (100~240VAC).

Connection method: 6-pin 5.08mm pitch terminal blocks (includes 2-pin power supply)

Overcurrent protection: 5A

No-load: 5.76W@48VDC>

Full-load: 240W@48VDC>

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%～95%（no condensation）

Housing: IP40 protection, metal

Installation: DIN-Rail or wall mounting

Weight: 692g

Dimension (W x H x D): 53mm×138mm×110mm

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3

IEC 61000-4-5 (Surge), Level 3

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6