IES6306-4GT2HS-2P48: 6-Port Gigabit Layer 2 Managed Industrial Ethernet Switch

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3z for 1000Base-X

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

ITU-T G.8032 for ERPS

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1AB for LLDP

IEEE 802.3ad for LACP

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

Gigabit copper port: 10/100/1000Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex, MDI/MDI-X Autotunning;

Gigabit PoE copper port: 10/100/1000Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex, MDI/MDI-X Autotunning;

the single port supports up to 30W PoE output power. PoE power supply pin: V+, V+, V-, V- correspond to Pin 1, 2, 3, 6

2.5G SFP slot: 100/1000 Base-X self-adaption or 100/1000/2.5G Base-X forced mode, SFP slot

Console port: CLI command line management port(RS-232), RJ45

Alarm port: 6-Pin 5.08mm pitch terminal blocks, relay occupies 2 pins and 1 relay alarm information output is supported, the current load capability is 1A@30VDC or 0.3A@125VAC>

Transmission mode: store and forward

MAC address: 8K

Packet buffer size: 4Mbit

Backplane bandwidth: 30G

Switch time delay: <10μs

IES6306-4GT2HS-2P48:

l Power input: 12~48VDC

l Connection method: 6- Pin 5.08mm pitch terminal blocks (includes 4-pin power supply)

l Power supply quantity: dual power supply redundancy backup

l Connection protection: anti-reverse connection

l Overcurrent protection: 5A

IES6306-4GP2HS-2P48-120W:

l Voltage range without using PoE function: 12~48VDC

l Rated voltage: 48VDC

l Maximum voltage range: 44VDC~55VDC

l Connection method: 6-Pin 5.08mm pitch terminal blocks (includes 4-pin power supply)

l Power supply quantity: dual power supply redundancy backup

l Connection protection: anti-reverse connection

l Overcurrent protection: 5A

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%～95% (no condensation)

Housing: IP40 protection, metal

Installation: DIN-Rail mounting

Dimension (W x H x D): 44mm×150mm×120mm

IEC 6100042 (ESD, electrostatic discharge), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

IEC 6100044 (EFT, electrical fast transient pulses), Level 3

Power supply: ±2kV

Relay: ±2kV

Signal: ±1kV

IEC 61000-4-5 (Surge), Level 3

Power supply: differential mode±1kV, common mode±2kV

Relay: differential mode±1kV, common mode±2kV

Signal: differential mode±1kV, common mode±2kV

Shock: IEC 60068- 2- 27

Free fall: IEC 60068- 2- 32

Vibration: IEC 60068-2-6