IDS-509PP Switch công nghiệp PoE+ 9 Port Managed của hãng Perle hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. IDS-509PP được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, …
Tính năng của sản phẩm:
- 9 port 10/100/1000Base-T for Gigabit and Fast Ethernet devices
- Advanced switching, VLAN, encryption and IEEE 1588 PTP
- PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
- Digital inputs for generation of alerts
- PROFINET and Modbus TCP Protocol Support
- Compact, corrosion resistant case attaches to a standard DIN Rail
- Redundant dual power input 48 VDC
- Programmable Controller safety and Hazardous Location Certification
- -40 to 75C industrial operating temperature
Thông số kỹ thuật của sản phẩm:
| Power |
| Dual Power Input |
Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch.
- 54 VDC nominal 50-57 VDC
- 48 VDC nominal 44 to 57 VDC
|
| Power Connector |
4-Pin Removable Terminal Block.
Grounding screw on metal chassis
|
| Overload Current Protection |
Fused overload current protection |
| Reverse polarity protection |
The positive and negative inputs can be reversed providing safe and simple power connectivity. |
| Access Ports |
| RJ45 PoE Ports |
8 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters ( 328 ft )
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V
Amount of available power to PoE ports is dependent upon sufficient voltage and power being supplied to the switch
- To supply 30 Watts to PoE+ (IEEE 802.3at type 2) PDs, the power input must be 54 VDC nominal
- To supply 15 Watts to PoE (IEEE 802.3af/at type 1) PDs, the power input must be 48 VDC nominal
|
| RJ45 port ( non-PoE ) |
1 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters ( 328 ft )
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V
|
| RJ45 Serial Console port |
RJ45 DTE
Optional rolled and straight thru RJ45 cables and DB adapters are available |
| USB Serial Console port |
MicroUSB Type B female port for serial console management. Used as an alternative port for out of band management connections |
| Digital Inputs |
Two Digital Inputs are provided that can be used for generation of alarms ( SNMP trap, energizing of on-board Alarm Relay,etc ) |
| Indicators |
| Power |
This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs |
| System |
Indicates whether the switch O/S is operating normally |
| RJ45 Ethernet |
These integrated colored LEDs indicate link, activity and speed for each port. |
| Alarm |
The alarm LED ( Red ) will be turned on under alarm conditions |
| P-Ring Master LED |
Status of the P-Ring Master |
| Backup Network Coupling |
Indicates whether or not the “Backup Network Coupling” feature is enabled ( Redundant links connecting two P-Ring networks ) |
| External Configuration DIP Switches |
| RM |
When enabled, designates this switch as the P-Ring Master |
| BC |
Activate Backup Coupling between 2 ring networks |
| Environmental Specifications |
| Operating Temperature Ranges |
Standard temperature models ( Std ): -10° C to 60° C (14° F to 140° F).
XT Industrial extended temperature models ( Ind ) : -40° C to 75° C ( -40° F to 167° F )
|
| Storage Temperature Range |
Minimum range of -25° C to 70° C (-13° F to 158° F). -40° C to 85° C (-40° F to 185° F) for industrial extended temperature models |
| Operating Humidity Range |
5% to 90% non-condensing |
| Storage Humidity Range |
5% to 95% non-condensing |
| Operating Altitude |
Up to 3,048 meters (10,000 feet) |
| Chassis |
Metal with an IP20 ingress protection rating |
| Din Rail Mountable |
DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
Removable to accommodate optional Panel/Wall mount kit
|
| MTBF |
107,501 hours.
MTBF Calculation model based on MIL-HDBK-217-FN2 @ 30 °C
|
| Operating Temperature Ranges |
Standard temperature models ( Std ): -10° C to 60° C (14° F to 140° F).
XT Industrial extended temperature models ( Ind ) : -40° C to 75° C ( -40 F to 167° F )
|
| Product Weight and Dimensions |
| Weight |
1.5 kg, 3.31 lbs |
| Dimensions |
75 x 130 x 121 mm, 2.95 x 5.12 x 4.76 inches |
| Packaging |
| Shipping Weight |
2.0 kg, 4.40 lbs |
| Shipping Dimensions |
170 x 260 x 70 mm, 6.7 x 10.23 x 2.76 inches |
Mã sản phẩm:
- IDS-509PP8 - Industrial Managed Power over Ethernet Switch - 9 ports: 9 x 10/100/1000Base-T RJ-45 ports, 8 of which are PoE/PoE+ capable. -10 to 60C operating temperature. PRO software feature set.
- IDS-509PP8-XT - Industrial Managed Power over Ethernet Switch - 9 ports: 9 x 10/100/1000Base-T RJ-45 ports, 8 of which are PoE/PoE+ capable. -40 to 75C operating temperature. PRO software feature set.
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"
bkaii.com.vn
BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!
