bkaii.com.vn
BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!
TSW202: MANAGED PoE+ ETHERNET SWITCH hãng Teltonika - Lithuania (Litva) hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. TSW202 được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh…
Tính năng của sản phẩm:
TSW202 is a managed PoE+ Ethernet switch, designed to provide granular network management capabilities while centralising power distribution. This PoE+ switch enables flexibility over management and power supply and supports protocols, including EtherNet/IP, PROFINET, and MRP. The TSW202 has 2 SFP ports and 8 Gigabit Ethernet ports providing 30 W of power each.
Thông số kỹ thuật
| Ethernet | |
| ETH | Multi-layer managed 8 x ETH ports, 10/100/1000 Mbps supports auto MDI/MDIX crossover |
| Fibre | 2 x SFP ports |
| IEEE 802.3 series standards | 802.3i, 802.3u,802.3ab, 802.3x, 802.3az |
| INDUSTRIAL PROTOCOLS | |
| Profinet | Profinet Class B conformance (available with optional order code) |
| POE OUT | |
| PoE+ ports | Port 1 - 8 |
| PoE standards | IEEE 802.3af (PoE,Type 1) and IEEE 802.3at(PoE+, Type 2), Alternative A (Batch 15 and all batches from Batch 17 onward) IEEE 802.3af (PoE, Type 1) and IEEE 802.3at (PoE+, Type 2), Alternative B (Batches 1–14 and Batch 16)PoE |
| Max Power per Port (at PSE) | 30 W |
| Total PoE Power Budget (at PSE) | 240 W |
| Maximum Ethernet cable length | 100 m |
| Services | |
| EtherNet/IP | Yes |
| SNMP V2, V3 | Yes |
| LLDP | Yes |
| NetworkManagement | 802.1p class of service,802.1x port-based networkaccess control, 802.1QVLAN |
| Network | |
| MRP | MRP client role, MRP managerrole |
| L2 features | Loop protection, Forwarding table, VLAN, STP/RSTP |
| DHCP | DHCP server, DHCP client, DHCP static leasescapable of using MAC with wildcards |
| Port Settings | Enable/disable, link speed control, port isolation, PoE Management, EEE (802.3az) management, Port Mirroring |
| L3 Features | Static IPv4 routing, staticIPv6 routing, DHCPv6client, static IPv6 address |
| Security | |
| Authentication | PAM — presharedkey, Radius & TACACS+, IP & login attempts block |
| MAC filtering support | Allow specific MAC addresses to connect through specified ports, ignore unauthorized or disablethe port if an unauthorized MAC address is detected |
| QoS | |
| QOS | Port priority, DSCP priority, 802.1p priority, TOS |
| Scheduling method | SP/WFQ/WRR |
| Bandwidth control | Rate limiting, storm control |
| Traffic Shaper | Port-based shaping |
| Diagnostics | |
| Tools | Cable diagnostic, ping, traceroute, nslookup |
| Ping reboot | Capability to restart PoE in a specific port |
| API | |
| Teltonika Networks Web API (beta)support | Expandyour device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com |
| System Characteristics | |
| RAM | 128MB, DDR3 |
| FLASH storage | 16 MB serial flash |
| Firmware / Configuration | |
| WEB UI | Update FW from file, check FW on server, configuration profiles, configurationbackup |
| FOTA | Update FW |
| RMS | Update FW/configuration for multiple devices at once |
| Keep settings | Update FW without losingcurrent configuration |
| FIRMWARE CUSTOMISATION | |
| Operating system | TSWOS (OpenWrt based Linux OS) |
| Supported languages | Busybox shell, Lua, C, C++ |
| Development tools | SDK package with build environment provided |
| Performance Specifications | |
| Bandwidth (Non-blocking) | 20 Gbps |
| Forwarding rate | 14.88 Mpps |
| Packet buffer | 512 KB |
| MAC address tablesize | 8K entries |
| Jumbo frame support | 10000 bytes |
| Power | |
| Connector | 2-pin industrialDC power socket |
| Input voltage range | 7 – 57 VDC |
| PoE-Out input voltage range | 44 – 57 VDC |
| Power consumption | Idle: < 3 W / Max: 8 W / PoE Max: 248 W |
| Physical Interfaces | |
| Ethernet | 8 x RJ45 ports,10/100/1000 Mbps |
| Fibre | 2 x SFP ports |
| Status LEDs | 1 x Power LED, 1 x Aux LED, 16 x ETH status LEDs, 2 x SFP status LEDs |
| Power | 1 x 2-pinindustrial DC powersocket |
| Reset | Software reset button |
| Other | 1 x Grounding screw |
| Physical Specification | |
| Casing material | Anodized aluminumhousing and panels |
| Dimensions (W x H x D) | 132 x 44.2 x 122.2 mm |
| Weight | 610 g |
| Mounting options | Integrated DIN rail bracket;wall mount and flat surface (additional kit needed) |
| Operating Environment | |
| Operating temperature | -40 °C to 75 °C |
| Operating humidity | 5% to 95% non-condensing |
| Ingress ProtectionRating | IP30 |
| Regulatory s Type Approvals | |
| Regulatory | CE, UKCA, RCM, ANRT, FCC, IC, CB, NBTC, PROFINET,CITC, RoHS, REACH, WEEE, SDPPI (POSTEL), JATE, Kenya, ICASA, Giteki, UL Safety |
| EMC Emissionss Immunity | |
| Standards | EN 55032:2015 + A11:2020 + A1:2020 EN 55035:2017 + A11:2020 EN IEC 61000-3-2: 2019 + A1:2021 EN 61000-3-3: 2013 + A1:2019 + A2:2021 |
| ESD | EN 61000-4-2:2009 |
| Radiated Immunity | EN IEC 61000-4-3:2020 |
| EFT | EN 61000-4-4:2012 |
| Surge Immunity (AC Mains Power Port) | EN 61000-4-5:2014 + A1:2017 |
| CS | EN 61000-4-6:2014 |
| DIP | EN IEC 61000-4-11:2020 |
| Safety | |
| Standards | CE: EN IEC 62368-1:2020 + A11:2020 RCM: AS/NZS62368.1:2022 CB: IEC 62368-1:2018 |
| Safety (Ordinary Locations) | |
| Standards | UL/CSA Safety: UL 62368-1 (3rd Ed., Rev. December 13, 2019), C22.2No. 62368-1:19 (3rd Ed., Rev. December 13, 2019) |
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"