bkaii.com.vn BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!

S-4GPT-DSFP-XT: Fiber Mode Converter Industrial Temperature Fiber Mode Conversion

Giá: Liên hệ

S-4GPT-DSFP-XT Fiber Mode Converter Industrial Temperature Fiber Mode Conversion của hãng Perle hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. S-4GPT-DSFP-XT được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh…

Bộ chuyển đổi tín hiệu Quang điện

Tính năng của sản phẩm:

Easy Fiber to Fiber network extension to remote locations
Provide wavelength conversion for CWDM and DWDM transponder applications
Protocol-transparency support for all network protocols
Rate-transparency support for SFP transceivers with data rates up to 4.25 Gbps
Reliable operation with advanced features like Smart Link Pass-Through and Fiber Fault Alert
Operates in -40F to +167F (-40C to +75C) extended temperature environments

Thông số kỹ thuật của sản phẩm:

Power
Input Supply Voltage	6 - 30 vDC, unregulated ( 12 vDC Nominal ). Regulated power adapter is not included
Current	325mA @ 12VDC
Power Consumption	4 watts
Power Connector	2-pin terminal block
Indicators
Power	This green LED is turned on when power is applied to the media converter. This LED is off when there is no power supplied. A Blinking LED will indicate that a hardware error has been detected.
LK1	LED is ON when a signal is detected on LK1. LED is OFF when there is no signal.
LK2	LED is ON when a signal is detected on LK2. LED is OFF when there is no signal.
Switches - accessible through a side opening in the chassis
Link Mode	Smart Link Pass-Through when enabled ( Default ) ensures that the link state on a fiber connection is directly reflected through the media converter to the other connection. If link is lost on one of the connections, then the other link will be brought down by the media converter. This feature applies when both SFP slots are occupied. If set in Standard Mode, the link is kept active. The unit will transmit a 25Mhz keep-alive signal to artificially keep the link up.
Fiber Fault Alert	If the media converter module detects a loss of fiber, it will immediately notify the fiber link partner that an error condition exists. Disabled ( Default ). The Media Converter will not monitor for fiber fault.
Multi-speed SFP	When enabled, identifies that the SFPs inserted are MSA complaint SFPs that have a multi-rate capability. When disable ( Default ), no action is performed in this context.
Rate Select	This enables rate selection when using dual-rate capable SFPs. If the “Multi-Speed SFP” select switch is in the “Disabled” position, this switch is ignored. High Speed - UP ( default ) Low Speed – DOWN
2 x SFP Slots
SFPs	SFP line rates up to 4.25Gbps are supported. The SFPs occupying each slot in the media converter however must be operating at the same speed. SFP power level 1 and 2 are supported.
Environmental Specifications
Operating Temperature	-40° C to 75° C (-40° F to 167° F)
Storage Temperature	minimum range of -40° C to 85° C (-40° F to 185° F)
Operating Humidity	5% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Operating Altitude	Up to 3,048 meters (10,000 feet)
Heat Output ( BTU/HR )	13.65
MTBF*	902,294
Chassis	Metal with an IP20 ingress protection rating
Mounting
Din Rail Kit	Optional
Wall / Rack Mount Kit	Optional
Product Weight and Dimensions
Weight	0.3 Kg, 0.7 lbs
Dimensions	120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches
Packaging
Shipping Weight	0.45 Kg, 1.0 lbs
Shipping Dimensions	170 x 260 x 70 mm, 6.7 x 10.2 x 2.8 inches

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!

Downloads s-4gpt-dsfp-installation-guide-bkaii.pdf