bkaii.com.vn BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!

IMC-P111P-M12-LV : Industrial Ethernet to fiber media converter

Giá: Liên hệ

IMC-P111P-M12-LVBộ chuyển đổi tín hiệu Quang điện chuẩn công nghiệp hỗ trợ tiêu chuẩn IEC 61850-3 gồm 1x 10/100Base-T(X) M12 connector to 1x 100Base-FX fiber or 1x 100Base-FX SFP của hãng ORing-Đài Loan hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam.IMC-P111P-M12-LV thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh…

Bộ chuyển đổi tín hiệu Quang điện

Tính năng của sản phẩm:

Designed for Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613
Leading EN50155-compliant Ethernet switch for rolling stock application
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
Support Ethernet to fiber or Ethernet to SFP port
Support LFP (Link Fault Pass-through) function
Supports full/half duplex operation
Supports store and forward transmission
Supports relay output for power failed alarm
Provided DIP-Switch to setting function
High reliability and rigid IP-30 housing
DIN-Rail and wall mounting enabled

Thông số kỹ thuật của sản phẩm:

Specifications
ORing Switch Model	IMC-P111FX-MM	IMC-P111FX-SS	IMC-P111P
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX	1	1	1
Fiber Ports Number	1	1	-
Fiber Ports Standard	100Base - FX	100Base - FX	-
Fiber Mode	Multi-mode	Single-mode
Fiber Diameter (μm)	62.5/125 μm 50/125 μm	9/125 μm	-
Fiber Optical Connector	SC	SC	-
Typical Distance (km)	2 km	30 km	-
Wavelength (nm)	1310 nm	1310 nm	-
Max. Output Optical Power (dBm)	-14 dBm	-8 dBm	-
Min. Output Optical Power (dBm)	-23.5 dBm	-15 dBm	-
Max. Input Optical Power(Saturation)	0 dBm	0 dBm	-
Min. Input Optical Power (Sensitivity)	-31 dBm	-34 dBm	-
Link Budget (dB)	7.5 dB	19 dB	-
100Base-FX SFP port	-	-	1
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-T(X) and 100Base-FX IEEE 802.3x for Flow control
Processing	Store-and-Forward
DIP-Switch setting	DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
LED Indicators
Power Indicator	Green : Power LED x 3 (ON : power input on-line / (OFF) power input off-line
10/100Base-T(X) RJ45 port indicator	Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down Amber for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator	Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down Amber for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP status indicator	Amber LED – (ON) LFP function fail / (OFF) LFP function disable
Fault indicator	Amber : Indicate unexpected event occurred
Duplex indicator	Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
Power
LV Model Input Power	Triple DC inputs. Dual 12~48VDC on 7-pin terminal block, one 12~45VDC on power jack
HV Model Input Power	Dual 100~240VAC power inputs on 8-pin terminal block
Power consumption (Typ.)	LV model : 12 Watts, HV model : 100VAC/4.8Watts, 240VAC/5.8Watts	LV model : 12 Watts HV model : 100VAC/4.8Watts, 240VAC/5.8Watts	LV model : 12 Watts HV model : 100VAC/4.8Watts, 240VAC/5.8Watts
Overload Current Protection	Present
Reverse Polarity Protection	Present on terminal block
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.)
Weight (g)	LV model : 660 g HL model : 802 g	LV model : 660 g HL model : 802 g	LV model : 650g HV model : 792g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-40 to 85°C (-40 to 185°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
Power Automation	IEC 61850-3, IEEE 1613
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1

Các bài viết tham khảo:

"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"

Downloads datasheet-imc-p111p-m12-bkaii.pdf