IAP-420+_EU Industrial wireless access point with 2x 10/100Base-T(X) của hãng ORing-Đài Loan, hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. IAP-420+_EU thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng . Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh…
Tính năng của sản phẩm:
- High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed
- Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
- Support X-Roaming < 100 ms
- Support AP/Client/Bridge/AP-Client Mode
- Secured Management by HTTPs
- Wireless connecting status monitoring
- Event Warning by Syslog, Email, SNMP Trap
- 1KV isolation for PoE P.D. port of IAP-420+
- Rigid IP-30 housing design
- DIN-Rail and Wall-mount enabled
Thông số kỹ thuật của sản phẩm:
| Specifications |
| ORing Switch Model |
IAP-420 |
IAP-420+ |
| Physical Ports |
|
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX |
2 |
| PoE P.D. Port |
- |
Present at ETH Fully compliant with IEEE 802.3af Power Device specification Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min |
| WLAN Interface |
|
| Operating Mode |
AP/Client/Bridge/AP-Client |
| Antenna and Connector |
1 x External reverse SMA-type antenna connector |
| Radio Frequency Type |
DSSS, OFDM |
| Modulation |
IEEE802.11b: CCK, DQPSK, DBPSK IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM |
| Frequency Band |
America / FCC: 2.412~2.462 GHz (11 channels ) Europe CE / ETSI: 2.412~2.472 GHz ( 13 channels ) |
| Transmission Rate |
802.11b: 1/2/5.5/11 Mbps 802.11g: 6/9/12/18/24/36/48/54 Mbps 802.11n(40MHz): UP to 150 Mbps |
|
|
|
|
| Encryption Security |
WEP: (64-bit, 128-bit key supported) WPA/WPA2:802.11i (WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) 802.1X Authentication supported TKIP encryption |
| Wireless Security |
SSID broadcast disable and enable |
| Protocol Support |
|
| Protocol |
ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP |
| LED Indicators |
|
| Power Indicator |
LED x 3, PWR 1, 2, (PoE): Green On: Power is on and functioning Normally. |
| 10/100Base-T(X) RJ45 Port Indicator |
LED x 2 , Green for port Link/Act at 100Mbps. |
| WLAN LEDs |
WLAN Link /ACT: Green: Blinking |
| Power |
|
| Redundant Input Power |
Dual DC inputs. 12~48VDC on 4-pin terminal block |
| Power Consumption (Typ.) |
4 Watts |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present |
| Physical Characteristics |
|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
41(W)x81(D)x95(H) mm |
| Weight (g) |
292 g |
297 g |
| Environmental |
|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-10 to 60°C(14 to 140°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory Approvals |
|
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-31 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
Các bài viết tham khảo:
"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"