NP5000-2T-8DI(3IN1)-RJ-P(12-48VDC) : Desktop/Wall Mounting 1/2/4/8 RS-232/485/422 3IN1 Safe Serial Server gồm 2x 100M copper và 8x 3IN1 (RS-232/485/422)

Standard: 10Base-T, 100Base-TX

Protocol: TCP, UDP, ARP, HTTP, HTTPS, TELNET, ICMP, SMTP, SNTP, DHCP, DNS

Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning

Interface form: RJ45

Interface quantity: 1/2

Duplex mode: Full/Half Duplex Mode Self-adaptive

Work mode: each serial port can simultaneously establish up to 4 TCP/UDP session connections, support work modes such as RealCom, Reverse RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast, Telnet, Reverse Telnet, RFC2217, Redundant COM, DRDAS RealCom and DRDAS TCP Server

Standard: EIA RS-232C, RS-485, RS-422

Quantity of serial port: 1/2/4/8 3IN1 serial ports

RS-232 signal: RXD, TXD, DTR, GND, DSR, RTS, CTS, DCD or RXD, TXD, DTR, GND, DSR, RTS, CTS

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, GND, R+, R-

Baud rate: 110bps-115200bps

Data bit: 5bit, 6bit, 7bit, 8bit

Parity bit: None, Even, Odd, Space, Mark

Stop bit: 1bit, 1.5bit, 2bit

Interface form: DB9 or RJ45

Flow control: RTS/CTS, DTR/DSR, XON/XOFF

Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC)

Load capacity: RS-485/422 end supports 32-node polling (customizable 256 nodes)

Transmission distance: RS-232, 15m; RS-485/422, 1200m

Pull high/low resistor for RS-485: 4.7kΩ

Electromagnetic isolation strength: 2kVDC

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%～95% (no condensation)

Housing: IP40 protection, metal

Installation: Desktop and Wall Mounting

NP5000-1T-1DI(3IN1)-DB-P(12-48VDC), NP5000-1T-2DI(3IN1)-DB-P(12-48VDC):

Dimension (W x H x D): 97mm×25mm×110mm (lugs are included)

Weight: 297g

NP5000-2T-4DI(3IN1)-RJ-P(12-48VDC), NP5000-2T-8DI(3IN1)-RJ-P(12-48VDC):

Dimension (W x H x D): 170mm×32.6mm×110mm (lugs are not included)

Weight: 590g

IEC 6100042 (ESD, electrostatic discharge), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

IEC 6100044 (EFT, electrical fast transient pulses), Level 3

Power supply: ±2kV

Signal: ±1kV

IEC 6100045 (Surge), Level 3

Power supply: common mode±2kV, differential mode±1kV

Signal: common mode±2kV, differential mode±1kV

Shock: IEC 60068- 2- 27

Free fall: IEC 60068- 2- 32

Vibration: IEC 60068- 2- 6