ICP222-2F-2CI Bộ chuyển đổi CAN đã tích hợp 2 cổng CAN và 2 cổng Ethernet thực hiện kết nối giữa mạng CAN-Bus và mạng Ethernet để tiếp tục mở rộng phạm vi giao tiếp của mạng CAN-Bus hỗ trợ 2 cổng Ethernet 100 CAN đến 2M của hãng 3Onedata - China hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. ICP222-2F-2CIđược thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng... Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, …
Tính năng của sản phẩm :
Support 2 CAN ports to 2 100M Ethernet fiber ports
Adopt SW-Ring ring network patent technology and support single ring function. Automatic recovery time from network failure is <20ms
Support multiple operating modes like TCP Server, TCP Client, UDP and TCP Auto
Support 5K~1000Kbps arbitrary baud rate
Support 12~48VDC wide voltage input
Support -40~75℃ wide operating temperature range
Support 2 100Base-FX Ethernet fiber ports
Support 5kbps~1000kbps line-speed non-blocking communication
Support multiple operating modes like TCP Server, TCP Client, UDP and TCP Auto
SW-Ring could implement network redundancy and prevent network storm
Support cross-gateway and cross-router communication
Support time setting for heartbeat and overtime disconnection, which can disconnect idle TCP automatically
Support CAN port status and parameter monitoring, making communication state clear to be seen
Support automatic reconnection from network interrupts to establish reliable TCP connection
Flexible CAN data framing setting can meet user’s various needs in data partition
TCP support multi-connection, which enables up to 4 users to monitor and manage CAN device simultaneously
Stand-alone or multi-device communication is supported in UDP mode, which enables multiple users to monitor or manage CAN device simultaneously
Support multiple configuration forms like Windows configuration tool, TELNET and WEB
Thông số kỹ thuật của sản phẩm :
Fiber Port
|
Standard: IEEE 802.3u for 100Base-FX
Protocol: TCP, UDP, ARP, HTTP, SW-Ring, TELNET, ICMP, DHCP, DNS
Port quantity: 2
Ring network configuration: single ring
Transmission speed: 100M
Interface form: SC/ST/FC
Duplex mode: full duplex
Transmission distance:
multimode: 2km
single mode: 20/40/60/80/100/120km
Transmission wavelength:
multimode: 1310nm
single mode: 1310nm or 1550nm
Operating mode: 4 sessions, support operating modes like TCP Server, TCP Client, UDP, TCP Auto, advanced TCP Server and advanced UDP
|
CAN Interface |
Standard: CAN2.0A, CAN2.0B
Interface quantity: 2 CAN ports
CAN signal: CANH, CANL
Duplex mode: 2-wire Half Duplex Mode
Baud rate: 2.5kbps-1000kbps
Load capacity: support concurrent transmitting of 110 nodes
Transmission distance: 40m~10km
Interface form: adopt 4-pin 5.08mm pitch terminal blocks
Terminating resistor: optional external 120Ω terminating resistor
Interface protection: 2kVAC isolation protection
|
Console Port |
CLI command line management port (RS-232), RJ45
|
Configuration Method |
WEB configuration management, TELNET configuration, Windows configuration tool
|
Redundancy Technology |
SW-Ring
|
LED Indicator
|
Power supply indicator, running indicator, Ethernet fiber port indicator, CAN port indicator
|
Power
Requirement
|
12~48VDC
3-pin 7.62mm pitch terminal blocks
Support non-polar connection
|
Power
Consumption
|
No-load: 2.81W@24VDC>
Full-load: 3.00W@24VDC>
|
Environmental
Limit
|
Operating temperature: -40~75℃
Storage temperature:-40~85℃
Relative humidity: 5%~95%(no condensation)
|
Physical
Characteristic
|
Housing: IP40 protection, metal
Installation: DIN-Rail mounting
Dimension (W x H x D): 35mm×110mm×95mm
Weight: 374g
|
Industrial
Standard
|
IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
Air discharge: ±8kV
Contact discharge: ±6kV
IEC 61000-4-4 (EFT, electrical fast transient), Level 4
Power supply: ±4kV
IEC 61000-4-5 (Surge), Level 3
Power supply: common mode±2kV, differential mode±1kV
CAN port: common mode±2kV, differential mode±1kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
|
Certification
|
CE, FCC, RoHS
|
Mã sản phẩm :
Available Models |
Fiber Port |
CAN |
Power Supply Range |
ICP222-2F-2CI |
2 |
2 |
12~48VDC
|
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"