bkaii.com.vn BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!

S-10G: Media Converters 10 Gigabit Copperand Fiber Converter

Giá: Liên hệ

S-10G Media Converters 10 Gigabit Copperand Fiber Converter của hãng Perle hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. S-10G được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh…

Bộ chuyển đổi tín hiệu Quang điện

Tính năng của sản phẩm:

Fiber to Fiber, copper to fiber and copper to copper conversion
2 empty slots that use use a variety of 10G transceivers supplied by Perle, Cisco or other MSA compliant SFP+ and XFPs
Advanced features –Smart Link Pass-Through, Fiber Fault Alert, Built-in Link Test Generator and Loopback
Support for Power Level 1,2,3 as well as high-power Level 4 XFPs
Optical signal regeneration: 3R (re-amplify, reshape, and retime)

Thông số kỹ thuật của sản phẩm:

Power	Dual SFP	Dual XFP	XFP to SFP
Input Supply Voltage	9 - 30 vDC, unregulated ( 12 vDC Nominal )
Maximum Power Consumption (watts)	7.2	XTX: 12.0* XTXH: 16.8*	XTS: 9.6* XTSH: 16.8*
Total Transceiver power supports (watts)	3.0	XTX: 7.0 XTXH: 11.0	XTS: 5.0 XTSH: 7.0
Power Connector	5.5mm x 9.5mm x 2.1mm barrel socket
Power Adapter
Universal AC/DC Adapter	100-240v AC, regulated AC/12v DC adapter included
Indicators
Power / TST	On: Power indication and in normal operation Blinking slowly: the unit is in loopback or test mode (either port) Red solid: the unit has a hardware error (upon power up) Red and blinking: the unit has a hardware error specified by combination of LK1 and LK2
LK1, LK2	On: Fiber link present Blinking quickly: Fiber link present and receiving data.(including test data) Blinking slowly: Fiber link disabled because the other fiber link went down. Blinking 1 sec on 3 sec off – module shut down due to high temperature. Off: No fiber link present or no module inserted
Switches - accessible through a side opening in the chassis
Smart Link Pass-Through	When the Smart Link Pass-Through switch is enabled (default), each port will reflect the state of its port peer. In this mode, if a link loss is detected on one port, the transmit signal on the other port is disabled “passing through” the state of the failed link. This enables managed switches and other devices to report link failures to their network NMS. When the switch is in the down position, Smart Link Pass-Through is disabled. If a link loss is detected on one port, the transmit signal remains enabled on the other port.
Fiber Fault Alert	Enabled (Default - Up) With Fiber Fault Alert the state of the 10 Gigabit ethernet receiver is passed to the transmitter. This provides fault notification to the partner device attached to the 10G ethernet interface of the media converter Disabled (Down)
EDC Mode	Electronic Dispersion Compensation (EDC) is an algorithmic method used to compensate for optical dispersion that occurs on high speed 10 Gigabit links. EDC mode settings are automatically configured by the media converter based on the information retrieved from the SFP+ or XFP module. This will enable proper operation for extended multimode 10GBase-LRM as well as active or passive copper cabling. In the default UP switch position the media converter will automatically set the 10G transceiver to match the EDC type declared by the SFP+ / XFP module to either to “linear” or “limiting”. In the event that there is a mismatch, setting the switch to the Down position on the media converter will flip the setting to that declared by the module.
Loopback	Capable of performing a loopback on each 10 Gigabit interface. In this mode, all frames received on the port in loopback mode will be transmitted back. This provides users with the capability of utilizing their own in-house test generators for testing the link.
Connectors	Dual SFP	Dual XFP	XFP to SFP
Pluggable 10G Fiber Transceiver slots ( Hot insertion and removable)	Two 10 Gigabit SFP+ Slots Power level 1, 2	Two 10 Gigabit XFP Slots Power level 1,2,3 Power Level 4 (XTSH model)	One 10 Gigabit SFP+ Power Level 1, 2 One 10 Gigabit XFP Power level 1,2,3 Power Level 4 (XTSH model)
Voltages supplied to XFP slots	-	1.8V, 3.3V, 5V and -5.2V	1.8V, 3.3V, 5V and -5.2V
Supported 10 Gigabit Fiber pluggable transceivers	IEEE 802.3ae compliant: 10GBase-SR 10GBase-LRM 10GBase-LR 10GBase-ER 10GBase-ZR CWDM/DWDM	IEEE 802.3ae compliant: 10GBase-SR 10GBase-LRM 10GBase-LR 10GBase-ER 10GBase-ZR CWDM/DWDM	IEEE 802.3ae compliant: 10GBase-SR 10GBase-LRM 10GBase-LR 10GBase-ER 10GBase-ZR CWDM/DWDM
Supported 10 Gigabit Copper pluggable transceivers	SFP+ Direct Attach Cable (DAC). Also known as: Twinax 10GBase-CU 10GSFP+Cu 10GBase-CX1 10GBase-CR1 Note: Passive and Active cable types supported	IEEE 802.3ak compliant: XFP 10GBase-CX4 copper	SFP+ Direct Attach Cable (DAC). Also known as: Twinax 10GBase-CU 10GSFP+Cu 10GBase-CX1 10GBase-CR1 Note: Passive and Active cable types supported IEEE 802.3ak compliant: XFP 10GBase-CX4 copper
Supported Gigabit Fiber SFPs	1000Base-SX 1000Base-LX/LH 1000Base-EX 1000Base-ZX 1000Base-BX CWDM/DWDM Note: In this mode both SFP modules must operate 1000Base-X	N/A	N/A
Environmental Specifications	Dual SFP	Dual XFP	XFP to SFP
Operating Temperature	0° C to 50° C (32° F to 122° F)
Storage Temperature	minimum range of -25° C to 70° C (-13° F to 158° F)
Operating Humidity	5% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Operating Altitude	Up to 3,048 meters (10,000 feet)
Heat Output ( BTU/HR )	24.6	XTX: 41.0 XTXH: 57.3	XTS: 38.2 XTSH: 57.3
MTBF (Hours)**	Without power adaptor: 364,715 With power adaptor: 206,946	XTX & XTXH without power adaptor: 332,711 XTX with power adaptor: 196,235 XTXH with power adaptor: 210,748	XTS & XTSH without power adaptor: 332,711 XTS with power adaptor:196,235 XTSH with power adaptor: 210,748
Chassis	Metal with an IP20 ingress protection rating
Mounting
Din Rail Kit	Optional
Wall / Rack Mount Kit	Optional
Product Weight and Dimensions	Dual SFP	Dual XFP	XFP to SFP
Product Weight	0.36 kg, 0.80 lbs	0.38 kg, 0.84 lbs	0.38 kg, 0.84 lbs
Product Dimensions	8 x 12 x 4.2 cm (3.1 x 4.7 x 1.7 inches)
Shipping Weight	0.64 kg, 1.41 lbs	0.66 kg, 1.46 lbs	0.66 kg, 1.46 lbs
Shipping Dimensions	26 x 17 x 7 cm (10.2 x 6.7 x 2.8 inches)

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!