IDS-105F: Switch công nghiệp 5 cổng Compact DIN Rail

Giá: Liên hệ

IDS-105F Switch công nghiệp 5 cổng Compact DIN Rail của hãng Perle hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. IDS-105F được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, …

Switch công nghiệp

Tính năng của sản phẩm:

5 port 10/100Base-TX ( RJ45 )
4 port 10/100Base-TX ( RJ45 ) with an SC/ST fiber port
Hazardous Location and Industrial Control Equipment Certification
Corrosion resistant IP30 aluminum case
Redundant dual power input 12/24/48 VDC, 18 to 30 VAC
Overload current and reverse polarity protection
Industrial operating temperature support up to -40 to 75C

Thông sô kỹ thuật của sản phẩm:

Power
Dual Power Input	Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 12/24/48 VDC Nominal. ( 9.6 to 60 VDC) 18 to 30 VAC
Power	4-Pin Removable Terminal Block.
Connector	Grounding screw on metal chassis
Maximum Current Consumption @24 vDC	140 mA
Maximum Power Consumption @24 vDC	3.4 Watts
Overload Current Protection	Reset-able fuse provides overload current protection
Reverse polarity protection	The positive and negative inputs can be reversed providing safe and simple power connectivity.
Access Ports
RJ45	4 or 5 shielded RJ45 ports for 10/100Base-TX up to 100 meters ( 328 ft ) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V
Fiber port	1 x fixed fiber port Duplex SC or ST connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable Simplex ( BIDI, single strand ) SC connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable PC and UPC type patch cords supported.
Environmental Specifications
Operating Temperature Ranges	Standard temperature models : 0° C to 60° C (32° F to 140° F). Industrial extended temperature models : -40° C to 75° C ( -40 F to 167° F )
Storage Temperature Range	Minimum range of -25° C to 70° C (-13° F to 158° F). -40 C to 85 C (-40 F to 185 F) for industrial extended temperature models
Operating Humidity Range	5% to 90% non-condensing
Storage Humidity Range	5% to 95% non-condensing
Operating Altitude	Up to 3,048 meters (10,000 feet)
Chassis	Aluminum with an IP30 ingress protection rating
Din Rail Mountable	DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit
Maximum Heat Output	11.6 BTU/Hr
MTBF	913,428 hours (without fiber module) 717,100 hours (with fiber module) MTBF Calculation model based on MIL-HDBK-217-FN2 @ 30 °C
Product Weight and Dimensions
Weight	0.19 kg, 0.3 lbs
Dimensions	30 x 115 x 70 mm, 1.18 x 4.52 x 2.76 inches
Packaging
Shipping Weight	0.34 kg, 0.8 lbs
Shipping Dimensions	170 x 260 x 70 mm, 6.69 x 10.24 x 2.76 inches
Contents Shipped	Industrial Ethernet Switch with DIN Rail attachment Terminal block Installation guide

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"