C-100MM Fast Ethernet Media Converter Modules 100Base-FX to 100Base-X Fiber Mode Conversion của hãng Perle được BKAII đang phân phối rộng rãi tại thị trường Việt Nam. C-100MM được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh…
Tính năng của sản phẩm:
- 100Base-FX to 100Base-X Fiber to Fiber Media Converter Module
- Multimode to multimode or multimode to single mode
- Extend multimode fiber to 120km ( or more through chaining )
- Choice in SC, LC and ST fiber connector models
- Signal regeneration prevents signal degradation
- Advanced Features: Link Pass-Through, Far-End Fault, loopback for each fiber connection
- High density applications with Perle Media Converter Chassis
Thông số kỹ thuật của sản phẩm:
Indicators |
Power / TST |
This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink slowly when in Loopback test mode. |
Fiber link 1 / Receive activity (LK1) |
This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received. |
Fiber link 2 on / Receive activity (LK2) |
This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received. |
Switches: On-Board |
Link Pass Through |
Enabled (Default) - When the state of the receiver is changed on one of the 100Base-X interfaces it is reflected on the other 100Base-X fiber transmitter.
If disabled, the 100Base-X fiber interfaces operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the other interface.
|
Far-End Fault (FEF) |
Enabled ( default ) - The media converter transmits the Far-End Fault Indication over the fiber connection whenever a receive failure is detected. The media converter continuously monitors the fiber connection and clears the Far-End Fault Indication condition when a valid signal is received.
When Disabled, Far-End Fault Indications are not transmitted regardless of the condition of the receive signal on the 100Base-X fiber connection.
|
Remote Loopback #1 |
The media converter can perform a loopback on the link #1 fiber interface.
Disabled (Default - Up)
Enabled - The 100Base-X receiver is looped to the 100Base-X transmitter. Link #2's fiber transmitter is taken off the interface
|
Remote Loopback #2 |
The media converter can perform a loopback on the link #2 fiber interface.
Disabled (Default - Up)
Enabled - The 100Base-X receiver is looped to the 100Base-X transmitter. Link #1's fiber transmitter is taken off the interface.
|
Cables |
Fiber Optic Cable |
Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron Single Mode: 9/125 micron (ITU-T 625) |
Packet Transmission Characteristics |
Bit Error Rate (BER) |
-12 |
Environmental Specifications |
Operating Temperature |
0 C to 50 C (32 F to 122 F) |
Storage Temperature |
minimum range of -25 C to 70 C (-13 F to 158 F) |
Operating Humidity |
5% to 90% non-condensing |
Storage Humidity |
5% to 95% non-condensing |
Operating Altitude |
Up to 3,048 meters (10,000 feet) |
Heat Output ( BTU/HR ) |
11.9 |
Maximum Power Consumption ( Watts ) |
3.5 |
MTBF (Hours)* |
489,076 |
Mã sản phẩm: Single Fiber Models
Model |
Port |
Connector |
Type |
Transmit (dBm) |
Receive (dBm) |
Power Budget (dBm) |
Wavelength (nm) |
Fiber Type |
Operating Distance |
Min |
Max |
Min |
Max |
C-100MM-S1ST20U |
Port 1 |
Dual ST |
100BASE-FX |
-20.0 |
-12.0 |
-31.0 |
-14.0 |
11.0* |
1310 |
MMF |
2 km (1.2 mi) |
Port 2 |
Single ST |
100BASE-BX |
-14.0 |
-8.0 |
-32.0 |
-3.0 |
18.0 |
1310/1550 |
SMF |
20 km (12.4 mi) |
C-100MM-S1ST20D |
Port 1 |
Dual ST |
100BASE-FX |
-20.0 |
-12.0 |
-31.0 |
-14.0 |
11.0* |
1310 |
MMF |
2 km (1.2 mi) |
Port 2 |
Single ST |
100BASE-BX |
-14.0 |
-8.0 |
-32.0 |
-3.0 |
18.0 |
1550/1310 |
SMF |
20 km (12.4 mi) |
C-100MM-S1SC20U |
Port 1 |
Dual SC |
100BASE-FX |
-20.0 |
-12.0 |
-31.0 |
-14.0 |
11.0* |
1310 |
MMF |
2 km (1.2 mi) |
Port 2 |
Single SC |
100BASE-BX |
-14.0 |
-8.0 |
-32.0 |
-3.0 |
18.0 |
1310/1550 |
SMF |
20 km (12.4 mi) |
C-100MM-S1SC20D |
Port 1 |
Dual SC |
100BASE-FX |
-20.0 |
-12.0 |
-31.0 |
-14.0 |
11.0* |
1310 |
MMF |
2 km (1.2 mi) |
Port 2 |
Single SC |
100BASE-BX |
-14.0 |
-8.0 |
-32.0 |
-3.0 |
18.0 |
1550/1310 |
SMF |
20 km (12.4 mi) |
C-100MM-S1SC40U |
Port 1 |
Dual SC |
100BASE-FX |
-20.0 |
-12.0 |
-31.0 |
-14.0 |
11.0* |
1310 |
MMF |
2 km (1.2 mi) |
Port 2 |
Single SC |
100BASE-BX |
-8.0 |
-3.0 |
-33.0 |
-3.0 |
25.0 |
1310/1550 |
SMF |
40 km (25 mi) |
C-100MM-S1SC40D |
Port 1 |
Dual SC |
100BASE-FX |
-20.0 |
-12.0 |
-31.0 |
-14.0 |
11.0* |
1310 |
MMF |
2 km (1.2 mi) |
Port 2 |
Single SC |
100BASE-BX |
-8.0 |
-3.0 |
-33.0 |
-3.0 |
25.0 |
1550/1310 |
SMF |
40 km (25 mi) |
Các bài viết tham khảo:
"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"