GW1102-2D(3IN1): Bộ chuyển đổi 2 cổng RS-232/485/422 sang Ethernet Modbus Gateway

Standard: 10Base-T, 100Base-TX

Protocol: Modbus TCP, TCP, IP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS

Rate: 10/100M automatic flow control, MDI/MDI-X autotunning

Interface quantity: 1

Interface form: RJ45

Duplex mode: full/half duplex mode self-adaption

Standard: EIA RS-232C, RS-485, RS-422

Protocol: Modbus RTU/ASCII

Quantity of serial port: 2 RS-232 or RS-485/422 serial port

RS-232 signal: RXD, TXD, DTR, GND, DSR, RTS, CTS, DCD

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, GND, R+, R-

Baud rate: 300-115200bps

Data bit: 5bit, 6bit, 7bit, 8bit

Parity bit: None, Even, Odd, Space, Mark

Stop bit: 1bit, 2bit

Interface form: RS-232, adopt RJ45;

                           RS-485/422, adopt 10-pin 5.08mm pitch terminal blocks

Flow control: RTS/CTS, DTR/DSR, XON/XOFF

Pull high/low resistor for RS-485: 4.7kΩ

Operating mode: RTU Master, RTU Slave, ASCII Master and ASCII Slave

Connection quantity: up to 32 TCP Slave requests are supported under Master mode

                                      up to 16 TCP Master connections are supported under Slave mode

WEB configuration management, TELNET configuration, Windows configuration tool

Classification of User Permissions, IP address filtering, MAC address filtering, WEB Console, TELNET Console

Indicator

Power

Requirement

9~48VDC, 2 pins 5.08mm pitch terminal blocks

Environmental

Limit

Operating temperature range: -40~75℃

Storage temperature range: -40~85℃

Relative humidity: 5%～95%（no condensation）

Physical

Characteristic

Housing: IP40 protection, metal

Installation: wall mounting

Dimension (W x H x D): 69mm×22mm×100mm

Weight: 230g (RS-232), 250g (RS-485)

Industrial

Standard

IEC 61000-4-2 (ESD, Electro-static Discharge), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6