eR-S1110: Ethernet Repeater 10/100/1000 Ethernet Repeater and Rate Converter

Giá: Liên hệ

eR-S1110Ethernet Repeater 10/100/1000 Repeater and Rate Ethernet Converter của hãng Perle được BKAII đang phân phối rộng rãi tại thị trường Việt Nam. eR-S1110 được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh,…

Bộ chuyển đổi Quang điện

Tính năng của sản phẩm:

Extend network distances an additional 100m / 328ft over 4-wire twisted pair
Rate conversion between 10/100/1000 Mbps network links
Transparent operation for all Ethernet protocols including 802.1Q VLAN packets and IP video compression schemes
Advanced features: Link Pass-Through, Interlink Fault Feedback, Plug and Play, Auto-MDIX and Loopback
Operates as a Powered Device (PD) under IEEE 802.3af so it can be used with a PoE Injector or Switch to eliminate the need to install AC power wiring

Thông số kỹ thuật của sản phẩm:

Ethernet

eR-S1110

Port

2 ports RJ45 – 10/100/1000 Base-T - Shielded

Auto-MDIX

Auto-MDIX enables proper operation with either straight-through or crossover cabling

Distance

Distance up to 100 meters (328 feet) as per IEEE 802.3

Maximum Frame Size

10240 bytes

Power

Input Supply Voltage

9 - 30 vDC, unregulated (12 vDC Nominal)

POE

As per 802.3af PD specifications (Port #1). PD ( Class 0 or 4 device )

Current

0.18 amps

Power Consumption

2.2 watts

Power Connectors

5.5mm x 9.5mm x 2.1mm barrel socket

Back of product

Power Adapter

Universal AC/DC adapter

100-240v AC, regulated 12V DC adapter included

Indicators

Power

This green LED is turned on when power is applied to the Ethernet Repeater. Otherwise it is off. The LED will blink when Hardware Fault.

ETH

Indicates link status and activity on Ethernet port(s).

G- on Y - off	On - Link at Gig Flashing - Link and Activity
G- on Y - on	On (both) - Link at 100M Flashing - Link and Activity
G- off Y - on	On - Link at 10M Flashing - Link and Activity Slow Flashing - Alternate port link is down but this port is good.

Switches

Link Mode

Standard (Default)– The 10/100/1000 Base-T link remains active independent of the state of the Ethernet link on its remote peer.

Link Pass-Through - the state of the 10/100/1000 Base-T Ethernet connection is "passed through" or propagated to the 10/100/1000 Base-T Ethernet link on its remote Ethernet Repeater peer. This enables a managed switch to report the state of the remote device to its network management system.

Environmental Specifications

Operating Temperature

-10 C to 50 C (14 F to 122 F)

Storage Temperature

-25 C to 70 C (-13 F to 158 F)

Operating Humidity

5% to 90% non-condensing

Storage Humidity

5% to 95% non-condensing

Operating Altitude

Up to 3,048 meters (10,000 feet)

Heat Output ( BTU/HR )

7.5

MTBF (Hours)*

Without power adaptor: 613,826

Mounting

Wall or Panel

Included

Din Rail Kit

Optional

Product Weight and Dimensions

Weight

0.23 kg / 0.51 lbs

Dimensions

90 x 64 x 22 mm / 3.54 x 2.52 0.87 inches

Packaging

Shipping Weight

0.45 kg / 1 lbs

Shipping Dimensions

260 x 170 x 70 mm / 10 x 6.7 x 2.76 inches

Regulatory Approvals

Emissions

FCC 47 Part 15 Class A
EN55032 (CISPR32)
EN61000-6-4
EN55024 -CISRP24
EN6100-4-2 (ESD): Contact
EN61000-4-3 (RS)
EN610004-4 (EFT)
EN61000-4-5 (Surge):
EN61000-4-6 (CS)
EN 61000-4-8 (PFMF)
EN 61000-4-11
EN61000-4-16

Electrical Safety

UL/ULC/EN 62368-1

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"