CM-10GT-XFPH: Media Converter Module 10GBase-T to XFP Copper and Fiber Converter

Giá: Liên hệ

CM-10GT-XFPH Media Converter Module 10GBase-T to XFP Copper and Fiber Converter của hãng Perle hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. CM-10GT-XFPH được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, …

Bộ chuyển đổi Quang điện

Tính năng của sản phẩm:

Copper to fiber and copper to copper conversion
Uses MSA compliant XFPs
Advanced features –Smart Link Pass-Through, Fiber Fault Alert, Built-in Link Test Generator and Loopback
High density applications with Perle MCR1900 Media Converter Chassis
Manage via SNMP, CLI - Telnet/SSH, Internet browser, or PerleVIEW Centralized Management Package with an MCR-MGT Media Converter Management Module
Support for Power Level 1,2,3 as well as high-power Level 4 XFPs

Thông số kỹ thuật của sản phẩm:

Power	10GT to XFP
Maximum Power Consumption (watts)	15*
Indicators
Power / TST	On: Power indication and in normal operation Blinking slowly: the unit is in loopback or test mode (either port) Red solid: the unit has a hardware error (upon power up) Red and blinking: the unit has a hardware error specified by combination of LK1 and LK2
LK1 (SFP/XFP)	On: Link present Blinking quickly: Fiber link present and receiving data.(including test data) Blinking slowly: Fiber link disabled because the other fiber link went down. Blinking 1 sec on 3 sec off – module shut down due to high temperature. Off: No fiber link present or no module inserted
LK2	On: 10GBase-T link present Blinking quickly: Link present and receiving data Blinking slowly: Link disabled because Link 1 went down Off: 10GBase-T link is not active
Connectors	10GT to XFP
10GBase-T (RJ45)	IEEE 802.3an 100 meters on CAT6A or better
Pluggable 10G Fiber Transceiver slot ( Hot insertion and removable)	10 Gigabit XFP Slot Power level 1,2,3
Voltages supplied to XFP slots	1.8V, 3.3V, 5V and -5.2V
Supported 10 Gigabit Fiber pluggable transceivers	IEEE 802.3ae compliant: 10GBase-SR 10GBase-LRM 10GBase-LR 10GBase-ER 10GBase-ZR CWDM/DWDM
Supported 10 Gigabit Copper pluggable transceivers	IEEE 802.3ak compliant: XFP 10GBase-CX4 copper
Chassis Slot profile	Two slots
Environmental Specifications	10GT to XFP
Operating Temperature	0° C to 50° C (32° F to 122° F)
Storage Temperature	minimum range of -25° C to 70° C (-13° F to 158° F)
Operating Humidity	5% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Operating Altitude	Up to 3,048 meters (10,000 feet)
Heat Output ( BTU/HR )	51
MTBF (Hours)**	286,082
Packaging
Shipping Weight	0.25 kg, 0.55 lbs
Shipping Dimensions	170 x 260 x 70 mm, 6.7 x 10.2 x 2.8 inches

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"

Downloads cm-10gt-installation-guide-bkaii.pdf