IMC-P111P-LV Bộ chuyển đổi tín hiệu Quang điện chuẩn công nghiệp IEC 61850-3 gồm 1x10/100Base-T(X) M12 sang 1x100Base-FX fiber or 1x100Base-FX SFP của hãng ORing-Đài Loan hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam.IMC-P111P-LV thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng . Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh,…
Tính năng của sản phẩm:
- Designed for Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613
- Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
- Support Ethernet to fiber or Ethernet to SFP port
- Support LFP (Link Fault Pass-through) function
- Supports full/half duplex operation
- Supports store and forward transmission
- Supports relay output for power failed alarm
- Provided DIP-Switch to setting function
- High reliability and rigid IP-30 housing
- DIN-Rail and wall mounting enabled
Thông số kỹ thuật của sản phẩm:
Specifications |
ORing Switch Model |
IMC-P111FX-MM |
IMC-P111FX-SS |
IMC-P111P |
Physical Ports |
|
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX |
1 |
1 |
1 |
Fiber Ports Number |
1 |
1 |
- |
Fiber Ports Standard |
100Base - FX |
100Base - FX |
- |
Fiber Mode |
Multi-mode |
Single-mode |
|
Fiber Diameter (μm) |
62.5/125 μm 50/125 μm |
9/125 μm |
- |
Fiber Optical Connector |
SC |
SC |
- |
Typical Distance (km) |
2 km |
30 km |
- |
Wavelength (nm) |
1310 nm |
1310 nm |
- |
Max. Output Optical Power (dBm) |
-14 dBm |
-8 dBm |
- |
Min. Output Optical Power (dBm) |
-23.5 dBm |
-15 dBm |
- |
Max. Input Optical Power(Saturation) |
0 dBm |
0 dBm |
- |
Min. Input Optical Power (Sensitivity) |
-31 dBm |
-34 dBm |
- |
Link Budget (dB) |
7.5 dB |
19 dB |
- |
100Base-FX SFP port |
- |
- |
1 |
Technology |
|
Ethernet Standards |
IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-T(X) and 100Base-FX IEEE 802.3x for Flow control |
Processing |
Store-and-Forward |
DIP-Switch setting |
DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex |
LED Indicators |
|
Power Indicator |
Green : Power LED x 3 (ON : power input on-line / (OFF) power input off-line |
10/100Base-T(X) RJ45 port indicator |
Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down Amber for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex |
100Base-FX fiber port indicator |
Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down Amber for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex |
LFP status indicator |
Amber LED – (ON) LFP function fail / (OFF) LFP function disable |
Fault indicator |
Amber : Indicate unexpected event occurred |
Duplex indicator |
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex |
Power |
|
LV Model Input Power |
Triple DC inputs. Dual 12~48VDC on 7-pin terminal block, one 12~45VDC on power jack |
HV Model Input Power |
Dual 100~240VAC power inputs on 8-pin terminal block |
Power consumption (Typ.) |
LV model : 12 Watts, HV model : 100VAC/4.8Watts, 240VAC/5.8Watts |
LV model : 12 Watts HV model : 100VAC/4.8Watts, 240VAC/5.8Watts |
LV model : 12 Watts HV model : 100VAC/4.8Watts, 240VAC/5.8Watts |
Overload Current Protection |
Present |
Reverse Polarity Protection |
Present on terminal block |
Physical Characteristics |
|
Enclosure |
IP-30 |
Dimensions (W x D x H) |
52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.) |
Weight (g) |
LV model : 660 g HL model : 802 g |
LV model : 660 g HL model : 802 g |
LV model : 650g HV model : 792g |
Environmental |
|
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Operating Temperature |
-40 to 85°C (-40 to 185°F) |
Operating Humidity |
5% to 95% Non-condensing |
Regulatory Approvals |
|
Power Automation |
IEC 61850-3, IEEE 1613 |
EMI |
FCC Part 15, CISPR (EN55022) class A |
EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
Shock |
IEC60068-2-27 |
Free Fall |
IEC60068-2-32 |
Vibration |
IEC60068-2-6 |
Safety |
EN60950-1 |
Các bài viết tham khảo:
"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"