NP5200-2T-2DI(3IN1)-DB - 2 Port RS-232/485/422 Secure Serial to Ethernet Convertercủa hãng 3Onedata hiện đang được BKAII phân phối tại thị trường Việt Nam. NP5200-2T-2DI(3IN1)-DBchức năng chính là chuyển đổi hai cổng RS232/485/422 sang 2 cổng Ethernet, được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh, …
Tính năng của sản phẩm:
-
Support 2 10/100Base-T(X) self-adaptive Ethernet interfaces and provide dual IP and MAC addresses to meet the requirements of multi-network management or network backups.
-
Support 110bps-115200bps (customizable 921600bps) line speed and non-blocking communication.
-
Support RealCom, Reverse RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast, Telnet, Reverse Telnet, RFC2217, Redundant COM, DRDAS RealCom, DRDAS TCP Server and other operating modes.
-
Support cross-gateway and cross-router communication.
-
Support multiple hosts polling mode, which allows multiple hosts to access the same serial port.
-
Support delimiter matching communication, achieving various demands for serial port packaging.
-
Support FIFO, compatible with various old type terminal devices.
-
Support IP address and MAC address filtering, which can achieve accurate access control easily.
-
Support graded user management to implement humanized authority management.
-
Support serial port status, parameters and communication statistical monitoring, making the communication status easy to read.
-
Support RTS/CTS, DTR/DSR and XON/XOFF flow control.
-
Support virtual serial port drive access mode and automatic connection recovery after network interruption.
-
Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation.
-
Support standard TCP/IP SOCKET application access.
-
TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously.
-
UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously.
-
Support TELNET and Reverse TELNET modes, build TELNET protocol session to realize the conversion of serial port data and Ethernet data between terminal device and server.
-
Support RFC2217 protocol, which can make serial port present in the host as local COM port.
-
Support multiple configuration forms like Windows configuration tool, TELNET, SSHD and WEB.
-
SSHD and HTTPS can guarantee the access security of data.
-
Support multiple alarm methods, including e-mail alarm, log alarm and system alarm.
-
Support multiple alarm events including power supply connection, warm start and cold start.
-
Conduct network diagnosis and troubleshooting via Ping and Traceroute.
-
Support ARP function, which can avoid the failure of communication due to the MAC address of serial server being aged by switch or router.
-
Support static routing, routing table could be added manually.
Thông số kỹ thuật của sản phẩm:
Ethernet
|
Standard: 10Base-T, 100Base-TX
Protocol: TCP, UDP, ARP, HTTP, HTTPS, TELNET, ICMP, SMTP, SNTP, DHCP, DNS
Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning
Interface form: RJ45
Interface quantity: 2
Duplex mode: Full/Half Duplex Mode Self-adaption
Work mode: each serial port can simultaneously establish up to 4 TCP/UDP session connections, support work modes such as RealCom, Reverse RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast, Telnet, Reverse Telnet, RFC2217, Redundant COM, DRDAS RealCom and DRDAS TCP Server
|
Serial Port
|
Standard: EIA RS-232C, RS-485, RS-422
Quantity of serial port: 1/2/4/8 3IN1 serial ports
RS-232 signal: RXD, TXD, DTR, GND, DSR, RTS, CTS, DCD
RS-485 signal: D+, D-, GND
RS-422 signal: T+, T-, GND, R+, R-
Baud rate: 110bps-115200bps
Data bit: 5bit, 6bit, 7bit, 8bit
Parity bit: None, Even, Odd, Space, Mark
Stop bit: 1bit, 1.5bit, 2bit
Interface form: DB9
Flow control: RTS/CTS, DTR/DSR, XON/XOFF
Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC)
Load capacity: RS-485/422 end supports 32 points polling (customizable 256 points)
Transmission distance: RS-232, 15m; RS-485/422, 1200m
Pull high/low resistor for RS-485: 4.7kΩ
Electromagnetic isolation strength: 2kVDC
|
Console Port
|
CLI command line management port (RS-232), RJ45
|
Configuration Method
|
WEB configuration management, TELNET configuration, Windows configuration tool, SSHD configuration
|
Security
|
User right classification, IP address filtering, MAC address filtering, SNMP/ Mail /System Log alarm, HTTP/HTTPS/SSHD/TELNET access control
|
Indicator
|
Power supply indicator, Ethernet port indicator, serial port indicator, running indicator
|
Power Supply
|
NP5200-2T-4DI(3IN1)-DB
The power supply access terminal is 6-pin 5.08mm pitch terminal blocks (power supply occupies 4 pins in the left)
Input power supply: 12~48VDC, dual power supply redundancy
NP5200-2T-2DI(3IN1)-DB、NP5200-2T-1DI(3IN1)-DB
The power supply access terminal is 8-pin 5.08mm pitch terminal blocks (power supply occupies 4 pins in the left)
Input power supply: 12~48VDC, dual power supply redundancy
|
Power Consumption
|
Available Models
|
No-load
(@12VDC)
|
Full-load
(@12VDC)
|
NP5200-2T-4DI(3IN1)-DB
|
1.68W
|
2.5W
|
NP5200-2T-2DI(3IN1)-DB
|
1.8W
|
1.9W
|
NP5200-2T-1DI(3IN1)-DB
|
1.4W
|
1.6W
|
|
Working Environment
|
Operating temperature: -40~75℃
Storage temperature: -40~85℃
Relative humidity: 5%~95%(no condensation)
|
Physical Characteristic
|
Housing: IP40 protection, metal
Installation: DIN-Rail mounting
NP5200-2T-4DI(3IN1)-DB:
Dimension (W x H x D): 53mm×138mm×110mm
Weight: 591g
NP5200-2T-2DI(3IN1)-DB:
Dimension (W x H x D): 33mm×138mm×110mm
Weight: 470g
NP5200-2T-1DI(3IN1)-DB:
Dimension (W x H x D): 33mm×138mm×110mm
Weight: 461g
|
Industrial Standard
|
IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
Air discharge: ± 8kV
Contact discharge: ±6kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3
Power supply: ±2kV
Signal: ±1kV
IEC 61000-4-5 (Surge), Level 3
Power supply: common mode±2kV, differential mode±1kV
Signal: common mode ±2kV, differential mode ±1kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
|
Authentication
|
CE, FCC, RoHS
|
Warranty
|
3 years
|
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"