MES600 Series Switch công nghiệp được quản lý theo tiêu chuẩn IEC61850 Layer 2 với 4 cổng fiber 100M + 4 cổng copper100M và 4 cổng nối tiếp tùy chọn của hãng 3Onedata - China hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. MES600Series được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng... Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh…
Tính năng của sản phẩm :
Support 4 100M fiber ports, 4 100M copper ports, 4 optional 3IN1 serial ports
Adopt SW-Ring patent technology, support single ring, coupling ring, chain ring, Dual-homing ring network function, automatic recovery time of network failure < 20ms
Support dual power supply input, input voltage: 12~48VDC
Support -40~85℃ wide operating temperature range
SNMPv1/v2c is used for network management of various levels
Port mirroring can conduct data analysis and monitoring, which is convenient for online debugging
QoS supports real-time traffic classification and priority setting
LLDP can achieve automatic topology discovery, which is convenient for visual management
DHCP sever and DHCP client could be used for allocating IP address of different strategies
File management is convenient for rapid configuration and online upgrade of the device
Log management records boot information, operation information and connection information
Port statistics can be used for the port real time traffic statistics
User password can conduct user hierarchical management to improve the device administrative security
MAC port locking could enhance the flexibility and security of network
E-mail alarm is convenient for discovering faults in time during remote management
Relay alarm is convenient for troubleshooting of construction site
Storm suppression can restrain broadcast, unknown multicast and unknown unicast
VLAN can simplify the network planning
Port trunking and LACP can increase network bandwidth and the reliability of network connection to achieve optimal bandwidth utilization
Bandwidth management and flow control can reasonably distribute network bandwidth, preventing unpredictable network status
GMRP and static multicast can be used for filtering multicast traffic to save the network bandwidth
SW-Ring and STP/RSTP can achieve network redundancy, preventing network storm
(Optional) support multiple operating modes of serial port: TCP Server, TCP Client, UDP, TCP auto, Realcom, advanced TCP Server and advanced UDP
Thông số kỹ thuật của sản phẩm :
Standard
&
Protocol
|
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
EEE 802.1Q for VLAN
IEEE 802.1p for CoS
IEEE 802.1AB for LLDP
|
Management |
SNMP v1/v2c Centralized Management of Equipment, Port Mirroring, QoS, LLDP, DHCP Server, DHCP Client, File Management, Port Statistics
|
Security |
Classification of User Permissions, Port Alarm, Power Supply Alarm, E-mail Alarm
|
Switch Function |
802.1Q Vlan, Static Port Aggregation, Bandwidth Management, Flow Control
|
Unicast / Multicast
|
Static Multicast, GMRP, IGMP-Snooping
|
Redundancy
Protocol
|
SW-Ring, STP/RSTP
|
Time Management |
SNTP
|
Interface |
100M copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning
100M fiber port: 100Base-FX, SC/ST/FC optional
Console port: CLI command line management port(RS-232), RJ45
Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output, current carrying capacity is 1A@24VDC or 0.5A@120VAC>
|
Serial Port
|
RS-232 signal: TXD, RXD, GND
RS-422 signal: T+, T-, R+, R-, GND
RS-485 signal: D+, D-, GND
Check bit: None, Even, Odd, Space, Mark
Data bit: 5bit, 6bit, 7bit, 8bit
Stop bit: 1bit, 1.5bit, 2bit
Baud rate: 300-115200bps
Interface: 5-pin 5.08mm pitch terminal blocks
Load capacity: RS-485/422 port supports 32-point polling environment(can be customized to 128-point)
Directional control: RS-485 adopts automatic data flow control technology
|
LED Indicator
|
Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator
|
Switch
Property
|
Transmission mode: store and forward
MAC address: 8K
Packet buffer size: 3Mbit
Backplane bandwidth: 12.8G
Switch time delay: <10μs
|
Power
Requirement
|
12~48VDC
The terminal block pitch is 4-pin 7.62mm
Dual power supply redundancy, non-polarity, reverse connection protection
|
Environmental
Limit
|
Operating temperature range: -40~85℃
Storage temperature range: -40~85℃
Relative humidity: 5%~95% (no condensation)
|
Physical Characteristic
|
Housing: IP40 protection, metal
Installation: DIN-Rail mounting
Dimension (W x H x D): 70mm×160mm×130mm
Weight: ≤1.18kg
|
Industrial
Standard
|
IEC 61000-4-2 (ESD), Level 4
Contact discharge: ±8kV
IEC 61000-4-4 (EFT), Level 4
Power supply: ±4kV
Ethernet port: ±2kV
Relay: ±4kV
IEC 61000-4-5 (Surge), Level 4
Power supply: common mode±4kV, differential mode±2kV
IEC 61000-4-6 (CS), Level 3
Test level: 10V
Frequency range: 150kHz-80MHz
IEC 61000-4-8 (PFMF), Level 5
Stable magnetic field: 100A/m
Short-time magnetic field(3s): 1000A/m
IEC 61000-4-12, Level 3
Test level: common mode±2.5kV, differential mode±1kV
Test frequency: 1MHz, 100kHz
IEC 61000-4-29
Voltage interrupts: 100%
Duration: 10ms, 3 times
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
|
Certification
|
CE, FCC, RoHS, IEC61850, IEEE1613, SGCC(Type test: Q/GDW 1429-2012, DL/T 1241-2013), CSG(Commissioned test)
|
Mã sản phẩm:
Available Models |
100M Fiber Port |
100M Copper Port |
RS-232/485/422 |
Power Supply Range |
MES600-4T4F-4D
|
4 |
4 |
4 |
12~48VDC
dual power supply
|
MES600-4T4F |
4 |
4 |
0 |
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"