TPS-3082GF-MM-M12-QODC: Switch công nghiệp

Giá: Liên hệ

TPS-3082GF-MM-M12-QODC Switch công nghiệp hỗ trợ tiêu chuẩn EN50155, có 10 cổng tốc độ gồm 8x 10/100Base-T(X) P.S.E. and 2x 1000Base-SX, Q-ODC connector của hãng ORing-Đài Loan hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. TPS-3082GF-MM-M12-QODC thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh,…

Switch công nghiệp

Tính năng của sản phẩm:

Leading EN50155-compliant Ethernet switch for rolling stock application
8 ports P.S.E. fully compliant with IEEE802.3af standard, provide up to 15.4 Watts per port
World’s fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
Open-Ring support the other vendor’s ring technology in open architecture
STP/RSTP/MSTP supported
Support PTP Client (Precision Time Protocol) clock synchronization
IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
SNMP v1/v2c/v3 support for secured network management
RMON for traffic monitoring
Support VLAN and LLDP protocol
DHCP assign each Equipment IP by each Port
Provide two Gigabit fiber port with Q-ODC connector
Event notification through Syslog, Email, SNMP trap, and Relay Output
Windows utility (Open-Vision) support centralized management and configurable by Web-based ,Telnet, and Console (CLI)
M12 connectors to guarantee reliable operation against environmental disturbances
Wall mounting enabled

Thông số kỹ thuật của sản phẩm:

Specifications
ORing Switch Model	TPS-3082GF-MM-M12-QODC
Physical Ports
10/100 Base-T(X) Ports in M12 Auto MDI/MDIX with P.S.E.	8 x M12 connector (4-pin D-coding)
1000Base-SX Fiber Ports in Q-ODC connector	2 x Q-ODC connector
RS-232 Serial Console Port	RS-232 in M12 connector (A-coding). Baud rate setting: 9600bps, 8, N, 1
Fiber Ports Number	2
Fiber Ports Standard	1000Base-SX
Fiber Mode	Multi-mode
Fiber Diameter (µm)	62.5/125 µm @ 50/125 µm
Fiber Optical Connector	Q-ODC
Typical Distance (Km)	0.55 Km
Wavelength (nm)	850 nm
Max. Output Optical Power (dbm)	-4 dbm
Min. Output Optical Power (dbm)	-9.5 dbm
Max. Input Optical Power (Saturation)	0 dbm
Min. Input Optical Power (Sensitivity)	-18 dbm
Link Budget (db)	8.5 db
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 802.3af PoE specification (up to 15.4 Watts per port for P.S.E.)
MAC Table	8192 MAC addresses
Priority Queues	4
Processing	Store-and-Forward
Switch Properties	Switching latency: 7 us Switching bandwidth: 5.6Gbps Max. Number of Available VLANs: 4096 IGMP multicast groups: 1024 Port rate limiting: User Define
Security Features	Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Supports Q-in-Q VLAN for performance & security to expand the VLAN space Radius centralized password management SNMP v1/v2c/v3 encrypted authentication and access security
Software Features	STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping for multicast filtering Port configuration, status, statistics, monitoring, security SNTP for synchronizing of clocks over network Support PTP Client (Precision Time Protocol) clock synchronization DHCP Server / Client support Port Trunk support MVR (Multicast VLAN Registration) support
Network Redundancy	O-Ring Open-Ring STP RSTP MSTP
Warning / Monitoring System	Relay output for fault event alarming Syslog server / client to record and view events Include SMTP for event warning notification via email Event selection support
LED Indicators
Power Indicator	Green : Power LED x 2
R.M. Indicator	Green : Indicate system operated in O-Ring Master mode
O-Ring Indicator	Green : Indicate system operated in O-Ring mode
Fault Indicator	Amber : Indicate unexpected event occurred
10/100Base-T(X) M12 PoE Port Indicator	Up Green for port Link/Act. Down Green for PoE indicator. Amber for Collision/Duplex indicator.
1000Base-SX Q-ODC Port Indicator	Green LED for Link/Act indicator
Fault Contact
Relay	Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
Power
Redundant Input Power	Dual DC inputs. 48VDC on 5-pin M23 connector
Power Consumption (Typ.)	10.75W
PoE Output Power	120 watts
Overload Current Protection	Present
Reverse Polarity Protection	Present
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	212 (W) x 75 (D) x 198 (H) mm
Weight (g)	1462 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-40 to 70°C (-40 to 158°F)
Operating Humidity	5% to 95% Non-condensing

Các bài viết tham khảo:

"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"

Downloads datasheet-tps-3082gf-mm-m12-qodc-bkaii.pdf