ioLogik E1214: Bộ chuyển mạch I/O từ xa 6 DI, 6 Relays, 2 cổng Ethernet

Giá: Liên hệ

ioLogik E1214 Bộ chuyển mạch I/O từ xa 6 DI, 6 Relays 2 cổng Ethernet của hãng Moxa-Taiwan được BKAII phân phối rộng rãi tại thị trường Việt Nam. ioLogik E1214 được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng... Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh…

Remote I/O

Tính năng của sản phẩm :

User-definable Modbus/TCP Slave addressing
Supports EtherNet/IP* adapter mode
Supports RESTful API for IIoT applications
2-port Ethernet switch for daisy-chain topologies
Save time and wiring cost with peer-to-peer communications
Active communications with MX-AOPC UA Server
Supports SNMPv1/v2c
Easy mass deployment and configuration with ioSearch utility
Friendly configuration via web browser
Simplify I/O management with MXIO library on either a Windows or Linux platform
Class I Division 2, ATEX Zone 2 certification
Wide operating temperature range: -40 to 75°C (-40 to 167°F)

Thông số kỹ thuật của sản phẩm :

• Inputs and Outputs
Digital Inputs	6 channels
Relays	6 channels
Isolation	3k VDC or 2k Vrms
• Digital Input
Sensor Type	Wet Contact (NPN or PNP), Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	• On: short to GND • Off: open
Wet Contact (DI to COM)	• On: 10 to 30 VDC • Off: 0 to 3 VDC
Common Type	6 points per COM
Counter Frequency	250 Hz
Digital Filtering Time Interval	Software configurable
• Relay
Note	Ambient humidity must be non-condensing and remain between 5 and 95%. The relays of the ioLogik E1214 may malfunction when operating in high condensation environments below 0°C.
Type	Form A (N.O.) power relay
Contact Current Rating	Resistive Load: 5 A @ 30 VDC, 250 VAC, 110 VAC
Breakdown Voltage	500 VAC
Relay On/Off Time	1500 ms (max.)
Initial Insulation Resistance	1000 mega-ohms (min.) @ 500 VDC
Mechanical Endurance	5,000,000 operations
Electrical Endurance	100,000 operations @ 5 A resistive load
Contact Resistance	100 milli-ohms (max.)
Pulse Output	0.3 Hz at rated load
• Power Requirements
Input Voltage	12 to 36 VDC
Input Current	188 mA @ 24 VDC
• MTBF (mean time between failures)
Time	808,744 hrs
Standard	Telcordia SR332
Common Specifications
• LAN
Ethernet	2 switched 10/100 Mbps RJ45 ports
Protection	1.5 kV magnetic isolation
Protocols	Modbus/TCP (Slave), EtherNet/IP*, SNMPv1/v2c, RESTful API, TCP/IP, UDP, DHCP, BOOTP, HTTP

• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight	Under 200 g (0.44 lb)
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Shock	IEC 60068-2-27
Vibration	IEC 60068-2-6
Altitude	Up to 2000 m
Note	Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Standards and Certifications
Safety	UL 508
EMC	EN 55032, EN 55024, EN 61000-3-2/3-3, EN 61000-6-2/6-4
EMI	CISPR 32, FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8
Hazardous Location	Class 1 Division 2, ATEX Zone 2
Green Product	RoHS, CRoHS, WEEE

Mã đặt hàng:

ioLogik E1214	Ethernet Remote I/O with 2-port Ethernet switch, 6 DIs, and 6 Relays
ioLogik E1214-T	Ethernet Remote I/O with 2-port Ethernet switch, 6 DIs, and 6 Relays, -40 to 75°C operating temperature

Các bài viết liên quan:

"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"