ioLogik 2542: Bộ điều khiển đa năng, 4 AI, 12 DIO, Click & Go Plus, -10 đến 60 ° C

ioLogik 2542 Bộ điều khiển đa năng, 4 AI, 12 DIO, Click & Go Plus, -10 đến 60°C của hãng Moxa hiện đang được BKAII  phân phối rộng rãi tại thị trường Việt Nam. ioLogik 2542 được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh,…

Mô hình ứng dụng:

• Thu thập dữ liệu thông minh để theo dõi giếng khí tự nhiên - Moxa

Tính năng của sản phẩm:

• Front-end intelligence with Click&Go Plus control logic, up to 48 rules
• Active communication with MX-AOPC UA Server
• Automatically complement disconnection period data with MX-AOPC UA Logger software
• 4-port unmanaged switch built in for linking to Ethernet devices
• I/O expansion port for daisy chaining up to 8 ioLogik E1200 units
• 3-in-1 serial port: RS-232, RS-422, or RS-485
• Supports SNMP v1/v2c/v3
• Simplifies I/O management with MXIO library for Windows or Linux
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments

­Thông số kỹ thuật của sản phẩm:

Memory

• microSD Slot : Up to 32 GB (SD 2.0 compatible)
  Note: For units operating in extreme temperatures, industrial-grade, wide-temperature microSD cards are required.

Input/Output Interface

• Analog Input Channels : 4
• Configurable DIO Channels (by software) : 12
• Buttons : Reset button
• Isolation : 3k VDC or 2k Vrms

Digital Inputs

• Connector : Screw-fastened Euroblock terminal
• I/O Mode : DI or event counter
• Sensor Type : Dry contact , Wet contact (NPN or PNP)
• Dry Contact : On: short to GND , Off: open
• Wet Contact (DI to COM) : On: 10 to 30 VDC , Off: 0 to 3 VDC
• Points per COM : 6 channels
• Counter Frequency :
• Digital Filtering Time Interval : Software configurable

Digital Outputs

• Connector : Screw-fastened Euroblock terminal
• I/O Mode : DO or pulse output
• I/O Type : Sink
• Current Rating : 500 mA per channel
• Pulse Output Frequency : 5 kHz (max.)
• DIO Output Leakage Current : 1 mA @ 30 VDC
• Over-Temperature Shutdown : 175°C (typical), 150°C (min.)
• Over-Voltage Protection : 45 VDC (typical)
• Analog Inputs
• Connector : Screw-fastened Euroblock terminal
• I/O Mode : Voltage/Current
• I/O Type: Differential
• Input Range : ±10 VDC , 0 to 10 VDC , 0 to 20 mA , 4 to 20 mA , 4 to 20 mA (with burn-out detection)
• Resolution : 16 bits
• Sampling Rate : All channels: 400 samples/sec
• Per channel: 100 samples/sec
• Accuracy : ±0.1% FSR @ 25°C , ±0.3% FSR @ -10 to 60°C
• Built-in Resistor for Current Input : 120 ohms
• Input Impedance : 1 mega-ohms (min.)
• Over-Voltage Protection : -25 to +30 VDC (power on) , -35 to +35 VDC (power off)

Ethernet Interface

• 10/100BaseT(X) Ports (RJ45 connector) : 4, 1 MAC address (Ethernet bypass)
• Magnetic Isolation Protection :

Ethernet Software Features

• Configuration Options : Web Console (HTTP/HTTPS), Windows Utility (IOxpress)
• Industrial Protocols : CGI commands, Modbus TCP Client (Master), Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library, RESTful API, SNMPv1/v2c/v3, SNMPv1/v2c Trap
• Management : BOOTP, IPv4, SMTP, TCP/IP, DHCP Client
• MIB : Device Settings MIB
• Security : HTTPS/SSL
• Time Management: SNTP

LED Interface

• LED Indicators : PWR, RDY, Serial port (P1, P2), Ethernet port (L1 to L4), I/O Channel Status (0 to 15), Wireless connection, Signal Status

Serial Interface

• Baudrate : 300 bps to 115.2 kbps
• Connector : 8-pin RJ45
• Data Bits: 5, 6, 7, 8
• Flow Control : None, RTS/CTS, XON/XOFF
• Parity : None, Even, Odd
• Serial Standards : RS-232, RS-422, RS-485
• Stop Bits : 1, 2

Serial Signals

• RS-232 : TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• RS-422 : Tx+, Tx-, Rx+, Rx-, GND
• RS-485-2w : Data+, Data-, GND
• RS-485-4w : Tx+, Tx-, Rx+, Rx-, GND

Serial Software Features

• Industrial Protocols : Modbus RTU Client (Master)

Security Functions

• IPsec VPN : DES, 3DES, AES-128, AES-192, AES-256

Power Parameters

• Power Connector : Screw-fastened Euroblock terminal
• Input Voltage : 12 to 48 VDC
• Power Consumption : 281 mA @ 24 VDC , 589 mA @ 12 VDC , 144 mA @ 48 VDC

Physical Characteristics

• Housing : Metal
• IP Rating : IP30
• Dimensions : 61 x 157 x 115 mm (2.4 x 6.18 x 4.53 in)
• Weight : 1,265 g (2.79 lb)
• Installation : DIN-rail mounting, Wall mounting (with optional kit)
• Wiring : I/O cable, 16 to 26 AWG
  Power cable, 12 to 24 AWG

Environmental Limits

• Operating Temperature : -10 to 60°C (14 to 140°F)
• Storage Temperature (package included) : -40 to 85°C (-40 to 185°F)
• Ambient Relative Humidity : 5 to 95% (non-condensing)
• Altitude : 2000 m

Standards and Certifications

• EMC : EN 61000-6-2/-6-4
• EMI : CISPR 32, FCC Part 15B Class A
• EMS : IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
  IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
  IEC 61000-4-6 CS: 3 V
  IEC 61000-4-8 PFMF
  IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
  IEC 61000-4-5 Surge: Power: 2 kV
• Vibration : IEC 60068-2-6
• Shock : IEC 60068-2-27
• Freefall : IEC 60068-2-32
• Hazardous Locations : ATEX, Class I Division 2
• Safety: UL 508
• Radio : EN 301 489-1/17
• Radio Frequency : EN 301 908, EN 301 489-24, EN 301 511

MTBF

• Time : 375,439 hrs

"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"