bkaii.com.vn BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!

ICF-1171I-S-ST: Industrial CAN-to-fiber converter for distance extension, ST single-mode

Giá: Liên hệ

ICF-1171I-S-ST: Industrial CAN-to-fiber converter for distance extension, ST single-mode của hãng Moxa được BKAII đang phân phối rộng rãi tại thị trường Việt Nam. ICF-1171I-S-ST được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng...Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh…

Tính năng của sản phẩm:

Transmits data for up to 40 km over optical fiber
Converts CAN signals to fiber and vice versa
Supports CAN 2.0A, CAN 2.0B, and CAN FD; conforms with the ISO 11898 standard
CAN 2.0 supports auto-baudrate
CAN 2.0 arbitration rate up to 1 Mbps
CAN FD arbitration rate up to 1 Mbps; data rate up to 5 Mbps
Dual power inputs for redundancy
Wide-temperature model available for -40 to 75°C environments
DIP switch for 120-ohm terminal resistance
Rotary switches for CAN 2.0/CAN FD arbitration and data rate configuration
LEDs for CAN bus diagnostics, fiber diagnostics, and power input status

Thông số kỹ thuật của sản phẩm:

Serial Interface

Fiber module optical interface		Multi-mode	Single-mode
Fiber Data Rate		100Base-Fx
Fiber Cable Requirements		62.5/125 µm	9/125 µm
		OM1	OS1
Typical Distance		2 km	40 km
Wavelength	Typical (nm)	1310
	TX Range (nm)	1280 to 1340
	RX Range (nm)	1100 to 1600
Optical Power	TX Range (dBm)	-10 to -20	0 to -5
	RX Range (dBm)	-3 to -32	-3 to -34
	Link Budget (dB)	12	29
	Dispersion Penalty (dB)	3	1

CAN Interface

Isolation	2 kV (built-in)
No. of Ports	1
Signals	CAN_L, CAN_H, CAN Signal GND
Terminator	N/A, 120 ohms (by DIP)
Protocols	CAN 2.0A, CAN 2.0B, CAN FD, compatible with ISO 11898 standard (DIP switch to select CAN 2.0/CAN FD setting)

Fiber Interface

No. of Ports	1
Connector	ICF-1171I-S-ST/ ICF-1171I-S-ST-T: Single-mode ST connector ICF-1171I-M-ST/ ICF-1171I-M-ST-T: Multi-mode ST connector
Optical Fiber	Single-mode, typical distance 40 km Multi-mode, typical distance 2 km

Power Parameters

Input Current	188.5 mA (max.)
Input Voltage	12 to 48 VDC
No. of Power Inputs	2
Power Connector	Terminal block

Relays

Contact Current Rating	Resistive load: 1 A @ 30 VDC
Pinouts	NC, COM, NO

Physical Characteristics

Housing	Metal
IP Rating	IP30
Dimensions	30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
Weight	294 g (0.65 lb)
Installation	DIN-rail mounting, Wall mounting (with optional kit)

Environmental Limits

Operating Temperature

ICF-1171I-S-ST, ICF-1171I-M-ST: 0 to 60°C (32 to 140°F)

ICF-1171I-S-ST-T, ICF-1171I-M-ST-T: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included)

-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

Standards and Certifications

EMC	EN 55032/35
EMI	CISPR 32, FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV, Signal: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF
International Approval	KC
Safety	UL 62368-1, EN 62368-1
Vibration	IEC 60068-2-6

MTBF

Time	2,412,885 hrs
Standards	Telcordia (Bellcore), GB

Mã đặt hàng

Model Name	Operating Temp.	Fiber Module Type
ICF-1171I-S-ST	0 to 60°C	Single-mode ST
ICF-1171I-S-ST-T	-40 to 75°C	Single-mode ST
ICF-1171I-M-ST	0 to 60°C	Multi-mode ST
ICF-1171I-M-ST-T	-40 to 75°C	Multi-mode ST

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"

Downloads moxa-icf-1171i-series-datasheet-v1-0.pdf

MC-1100 Series: Quad-core Fanless DIN-Rail Automation Computer

Giá: Liên hệ

MC-1100 SeriesQuad-core Fanless DIN-Rail Automation Computer của hãng Moxa-Taiwan hiện �...

ICF-1171I-S-ST: Industrial CAN-to-fiber converter for distance extension, ST single-mode

Bài viết mới cập nhật...

Catalog online

FIND US ON: