Bluetooth 4.0 NRF51822 Motherboard

Giá: Liên hệ

BLE4.0 Bluetooth 2.4G Mother Board, provides I/O expansion connectors and various interfaces

Overview

BLE400 is a mother board designed for BLE4.0 Bluetooth 2.4G Wireless Module.

BLE400 Features

Onboard battery holder, multi power supplies are available
All the IOs are accessible for easy expansion
Integrates CP2102 for debugging
LEDs and user keys, compatible with other official boards, easy to use

What's on the BLE400

Bluetooth 2.4G RF development board on board resource

Wireless module connector: for easily connecting modules like Core51822
MCU pins expansion connector
I2C interface
SPI interface
5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
USB connector: USB TO UART via onboard convertor CP2102
Debugging interface
UART interface
Battery holder
User LEDs
User keys
Reset button
CP2102
USB TO UART jumper
LEDs & Keys jumper

BLE400 Dimension

BLE400 Dimension

Kit phát triển BLE Bluetooth, NFC SoC nRF5283 có vi xử lý trung tâm là SoC nRF5283 của Nordic Semiconductor.

nRF52823 là dòng IC SoC Bluetooth Low Energy có tích hợp NFC mới nhất, SoC 32bit ARM Cortex M4, bộ nhớ Flash, bộ nhớ RAM lớn, công nghệ siêu tiết kiệm năng lượng , phù hợp cho các ứng dụng BLE, IoT đang sốt hiện nay.

Kit phát triển BLE Bluetooth SoC nRF5283 ARM Cortex M4 có ngoại vi đa dạng đầy đủ, có thể debug bằng JTAG

Thông số kỹ thuật kit BLE Bluetooth, NFC SoC nRF5283

Core: BLE Bluetooth SoC nRF52823 ARM Cortex™-M4F CPU with 512kB + 64kB RAM.

Điện áp: 5VDC USB.

Cổng nạp Jtag 6 chân, có Adapter chuyển sang cổng Jtag 10 chân chuẩn giao tiếp mạch nạp Debugger Jlink.

Micro SD, NFC, USB - UART.

Nút nhấn, led thí nghiệm, nút nhấn cảm ứng.

Mắt thu hồng ngoại, quang trở, biến trở.

Các cổng giao tiếp MPU6050, MPU9250/LIS3DH/LIS3DSH màn hình Oled,TFT LCD

Thông số kỹ thuật Soc nRF52823 ARM Cortex™-M4F CPU

The nRF52832 SoC is a powerful, highly flexible ultra-low power multiprotocol SoC ideally suited for Bluetooth® low energy (previously called Bluetooth Smart), ANT and 2.4GHz ultra low-power wireless applications. The nRF52832 SoC is built around a 32-bit ARM® Cortex™-M4F CPU with 512kB + 64kB RAM. The embedded 2.4GHz transceiver supports Bluetooth low energy, ANT and proprietary 2.4 GHz protocol stack. It is on air compatible with the nRF51 Series, nRF24L and nRF24AP Series products from Nordic Semiconductor.

Processing power

The nRF52832 incorporates a powerful Cortex-M4F processor enabling the most demanding applications with complex arithmetic requirements to be realized in a single chip solution. The IC supports DSP instructions, a Floating Point Unit (FPU), single-cycle multiply and accumulate, and hardware divide for energy-efficient process of computationally complex operations.

Multiprotocol radio

The 2.4GHz radio supports multiple protocols including Bluetooth low energy, ANT and 2.4GHz proprietary. The radio has high definition RSSI and highly automated functionality, including EasyDMA for direct memory access during packet send and retrieve. Nordic provides protocol stacks for Bluetooth low energy. ANT protocol stacks are available from ANT here: www.thisisant.com.

Power Efficiency

The nRF52832 SoC is an extremely power efficient device that can run from a supply between 1.7V and 3.6V. All individual peripherals and clocks offer complete flexibility of power down when not required for task operation thus minimizing power consumption to a minimum. The IC has a comprehensive system of automated and adaptive power management features. These features range across the entire IC’s operation from power supply switching to peripheral bus/EasyDMA memory management, to automated shut down of all but the absolute essential peripherals required to perform a task.

On-chip NFC tag

NFC™-A tag support is included on chip. Out-of-Band (OOB) pairing using NFC simplifies the process of authenticated pairing between two Bluetooth devices by exchanging authentication information over an NFC link.

Package options

The nRF52832 is available in 6x6mm 48-pin QFN packages and 3.0x3.2mm ultra-compact wafer-level chip-scale packages (WL-CSP).

SoftDevice

The nRF52832 is supported by the S132 SoftDevice, a Bluetooth 4.2 pre-qualified Bluetooth low energy protocol stack.

FEATURES

Single chip, highly flexible, 2.4 GHz multi-protocol SoC
32-bit ARM Cortex-M4F Processor
1.7v to 3.6v operation
512kB flash + 64kB RAM
Supports concurrent Bluetooth low energy/ANT protocol operation
On-chip NFC tag for Out-of-Band (OOB) pairing
Up to +4dBm output power
-96dBm sensitivity, Bluetooth low energy
Thread safe and run-time protected
Event driven API
On air compatible with nRF24L and nRF24AP series
2 data rates (2Mbps/1Mbps)
PPI - maximum flexibility for power-efficient applications and code simplification
Automated power management system with automatic power management of each peripheral
Configurable I/O mapping for analog and digital I/O
3 x Master/Slave SPI
2 x Two-wire interface (I²C)
UART (RTS/CTS)
3 x PWM
AES HW encryption
Real Time Counter (RTC)
Digital microphone interface (PDM)
On-chip balun

APPLICATIONS

Internet of Things (IoT)
Wearables
SmartHome sensors
Connected white goods
Computer peripherals
Voice-command smart remotes
A4WP ‘Rezence’ wireless charging
Beacons
Sports and fitness sensors and hubs
Connected health products
Smart watches
RC Toys
Interactive games
Building automation and sensor networks

"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"