bkaii.com.vn BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!

IDS-509GPP: Switch công nghiệp PoE+ hỗ trợ 9 cổng Quang tốc độ Gigabit

Giá: Liên hệ

IDS-509GPP Switch công nghiệp PoE+ hỗ trợ 9 cổng Quang tốc độ Gigabit của hãng Perle-Canada hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. IDS-509GPP được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, …

Switch công nghiệp

Tính năng của sản phẩm:

100/1000Base-T ports for Gigabit and Fast Ethernet devices , 1000Base-X SC/ST fiber ports
Advanced switching, VLAN, encryption and IEEE 1588 PTP
PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
Digital inputs for generation of alerts
PROFINET and Modbus TCP Protocol Support
Compact, corrosion resistant case attaches to a standard DIN Rail
Redundant dual power input 48 VDC
Programmable Controller safety and Hazardous Location Certification
-40 to 75C industrial operating temperature

Thông số kỹ thuật của sản phẩm:

Power
Dual Power Input	Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 54 VDC nominal 50-57 VDC 48 VDC nominal 44 to 57 VDC
Power Connector	4-Pin Removable Terminal Block. Grounding screw on metal chassis
Overload Current Protection	Fused overload current protection
Reverse polarity protection	The positive and negative inputs can be reversed providing safe and simple power connectivity.
Access Ports
RJ45 / PoE Ports	6 shielded RJ45 PoE ports for 10/100/1000Base-T up to 100 meters ( 328 ft ) or 6 shielded RJ45 PoE ports for 10/100/1000Base-T up to 100 meters ( 328 ft ) plus 1 non-PoE RJ45 port for 10/100/1000Base-T up to 100 meters ( 328 ft ) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V Amount of available power to PoE ports is dependent upon sufficient voltage and power being supplied to the switch To supply 30 Watts to PoE+ (IEEE 802.3at type 2) PDs, the power input must be 54 VDC nominal To supply 15 Watts to PoE (IEEE 802.3af/at type 1) PDs, the power input must be 48 VDC nominal
RJ45 Serial Console port	RJ45 DTE Optional rolled and straight thru RJ45 cables and DB adapters are available
USB Serial Console port	MicroUSB Type B female port for serial console management. Used as an alternative port for out of band management connections
Digital Inputs	Two Digital Inputs are provided that can be used for generation of alarms ( SNMP trap, energizing of on-board Alarm Relay,etc )
Gigabit Fiber port	2 or 3 1000Base-x fiber port models Duplex SC or ST connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable PC and UPC type patch cords supported.
Power	This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs
System	Indicates whether the switch O/S is operating normally
RJ45 Ethernet	These integrated colored LEDs indicate link, activity and speed for each port.
Fiber Link	Fiber link LED indicates Link and Data Activity
Alarm	The alarm LED ( Red ) will be turned on under alarm conditions
P-Ring Master LED	Status of the P-Ring Master
Backup Network Coupling	Indicates whether or not the “Backup Network Coupling” feature is enabled ( Redundant links connecting two P-Ring networks )
External Configuration DIP Switches
RM	When enabled, designates this switch as the P-Ring Master
BC	Activate Backup Coupling between 2 ring networks
Environmental Specifications
Operating Temperature Ranges	Standard temperature models ( Std ): -10° C to 60° C (14° F to 140° F). XT Industrial extended temperature models ( Ind ) : -40° C to 75° C ( -40° F to 167° F )
Storage Temperature Range	Minimum range of -25° C to 70° C (-13° F to 158° F). -40° C to 85° C (-40° F to 185° F) for industrial extended temperature models
Operating Humidity Range	5% to 90% non-condensing
Storage Humidity Range	5% to 95% non-condensing
Operating Altitude	Up to 3,048 meters (10,000 feet)
Chassis	Metal with an IP20 ingress protection rating
Din Rail Mountable	DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit
MTBF	2 fiber port models : 99,059 hours 3 fiber port models: 95,317 MTBF Calculation model based on MIL-HDBK-217-FN2 @ 30 °C
Operating Temperature Ranges	Standard temperature models ( Std ): -10° C to 60° C (14° F to 140° F). XT Industrial extended temperature models ( Ind ) : -40° C to 75° C ( -40° F to 167° F )
Product Weight and Dimensions
Weight	1.5 kg, 3.31 lbs
Dimensions	75 x 130 x 121 mm, 2.95 x 5.12 x 4.76 inches
Packaging
Shipping Weight	2.0 kg, 4.40 lbs
Shipping Dimensions	170 x 260 x 70 mm, 6.7 x 10.23 x 2.76 inches

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"