NPort S9650I-16B-2HV-IRIG-T: 16-port RS-232/422/485 rugged device server with IRIG-B signal output on the serial ports, 2 10/100BaseT(X) ports with IEEE 1588v2 support, 88 to 300 VDC or 85 to 264 VAC, -40 to 85°C operating temperature, with IRIG-B BNC mod

Alarm Contact Channels

Resistive load: 1 A @ 24 VDC

10/100BaseT(X) Ports (RJ45 connector)

NPort S9650I-E Series: 4 RJ45 ports NPort S9650I-MSC Series: 2 RJ45 ports NPort S9650I-SSC Series: 2 RJ45 ports NPort S9650I-IRIG Series: 2 RJ45 ports

100BaseFX Ports (multi-mode SC connector)

NPort S9650I-MSC Series: 2 multi-mode SC ports

100BaseFX Ports (single-mode SC connector)

NPort S9650I-SSC Series: 2 single-mode SC ports

Magnetic Isolation Protection

1.5 kV (built-in)

Optical Fiber

Standards

IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1p for Class of Service

IEEE 802.1Q for VLAN Tagging

IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1X for authentication

IEEE 802.3 for 10BaseT

IEEE 802.3ad for Port Trunk with LACP

IEEE 802.3u for 100BaseT(X) and 100BaseFX

IGMP Groups

256

Max. No. of VLANs

64

Priority Queues

4

VLAN ID Range

VID 1 to 4094

Configuration Options

Command Line Interface (CLI) through Serial/Telnet/SSH, Web Console (HTTP/HTTPS), Windows Utility

Management

DHCP Client, DHCP Option 82, HTTP, IEC 61850 MMS, IPv4, LLDP, Port Mirror, RARP,

RMON, SMTP, SNMPv1/v2c/v3, Syslog, Telnet, TFTP, Web Console

Filter

GMRP, GVRP, IGMP v1/v2

Windows Real COM Drivers

Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

Linux Real TTY Drivers

Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x

Fixed TTY Drivers

SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5. x, HP-UX 11i, Mac OS X

Android API

Android 3.1.x and later

Industrial Protocols

Modbus TCP Server (Slave), DNP3 TCP Outstation

Time Management

NTP Server/Client, SNTP, IEEE 1588v2 PTP (hardware-based), IRIG-B

MIB

Bridge MIB, Device Settings MIB, Ethernet-like MIB, MIB-II, P-BRIDGE MIB, Q-BRIDGE MIB, RFC1213, RFC1317, RMON MIB Groups 1, 2, 3, 9, RSTP MIB

Redundancy Protocols

RSTP, Turbo Chain, Turbo Ring v1, Turbo Ring v2

Security

HTTPS/SSL, Local Account Accessibility, TACACS+, RADIUS, SSH

PWM/PPS Output, BNC Connector

NPort S9650I-IRIG Series: 1

PWM/PPS Output, DB9 Female

NPort S9650I-8B-2HV-IRIG-T: 8

NPort S9650I-16B-2HV-IRIG-T: 16

PWM Input, BNC Connector

NPort S9650I-IRIG Series: 1

Connector

NPort S9650I-8/-16 Series: DB9 male NPort S9650I-8B/-16B Series: DB9 female

NPort S9650I-8F/-16F Series: Multi-mode fiber ST connector

No. of Ports

8 or 16

Serial Standards

RS-232, RS-422, RS-485

Operation Modes

Real COM mode, RFC2217 mode, TCP Client mode, TCP Server mode, UDP mode, Modbus mode, DNP3 mode, DNP3 Raw Socket mode, Disabled

Baudrate

50 bps to 921.6 kbps (supports non-standard baudrates)

Data Bits

5, 6, 7, 8

Stop Bits

1, 1.5, 2

Parity

None, Even, Odd, Space, Mark

Flow Control

None, RTS/CTS, XON/XOFF

Isolation

2 kV

Surge

4 kV

RS-485 Data Direction Control

ADDC® (automatic data direction control)

Pull High/Low Resistor for RS-485

1 kilo-ohm, 150 kilo-ohms

Terminator for RS-485

120 ohms

Console Port

RS-232 (TxD, RxD, GND), 10-pin RJ45 (19200, n, 8, 1)

RS-232

NPort S9650I-IRIG Series: TxD, RxD, RTS, CTS, DTR/+IRIG-B, DSR, DCD, GND NPort S9650I Series: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422

NPort S9650I-IRIG Series: TxD+, TxD-, RxD+, RxD-, GND, +IRIG-B

NPort S9650I Series: Tx+, Tx-, Rx+, Rx-

RS-485-4w

Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w

NPort S9650I-IRIG Series: Data+, Data-, GND, +IRIG-B NPort S9650I Series: Data+, Data-, GND

Ethernet Interface

Turbo Ring, Master, Coupler, Reserved

Max. No. of Client Connections

32

Max. No. of Server Connections

16

Max. No. of Master Connections

16

Max. No. of Outstation Connections

32

Automatic Reboot Trigger

Built-in WDT

Alert Tools

Built-in buzzer and RTC (real-time clock)

No. of Power Inputs

2

Reverse Polarity Protection

Supported

Input Current

0.65 A @ 100 VAC, 0.47A @ 100 VDC

Input Voltage

110/220 VAC/VDC (100 to 240 VAC, 100 to 250 VDC)

Housing

Metal

Installation

19-inch rack mounting

Dimensions

457 x 32 x 330 mm (18 x 1.25 x 12.99 in)

Weight

Product only: 5.15 kg (11.35 lb)

Operating Temperature

-40 to 85°C (-40 to 185°F)

Storage Temperature (package included)

-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

EMC

EN 61000-6-2/-6-4

EMI

CISPR 32, FCC Part 15B Class A

EMS

IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m

IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV

IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV

IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m

IEC 61000-4-8 PFMF

IEC 61000-4-11 DIPs

Environmental Testing

IEC 60068-2-2

IEC 60068-2-14

Power Substation

IEC 61850-3, IEEE 1613

Safety

EN 61010-2-201, UL 61010-2-201

Shock

IEC 60068-2-27

Vibration

IEC 60068-2-6, IEC 60068-2-64

Green Product

RoHS, CRoHS, WEEE

Time

NPort S9650I-8-2HV-E-T: 224,670 hrs NPort S9650I-8-2HV-MSC-T: 220,944 hrs NPort S9650I-8-2HV-SSC-T: 220,944 hrs NPort S9650I-8B-2HV-IRIG-T: 213,025 hrs NPort S9650I-8F-2HV-E-T: 311,734 hrs NPort S9650I-8F-2HV-MSC-T: 304,587 hrs NPort S9650I-8F-2HV-SSC-T: 304,587 hrs NPort S9650I-16-2HV-E-T: 158,816 hrs NPort S9650I-16-2HV-MSC-T: 156,949 hrs NPort S9650I-16-2HV-SSC-T: 156,949 hrs NPort S9650I-16B-2HV-IRIG-T: 157,770 hrs NPort S9650I-16F-2HV-E-T: 261,817 hrs NPort S9650I-16F-2HV-MSC-T: 256,761 hrs NPort S9650I-16F-2HV-SSC-T: 256,761 hrs

Standards

Telcordia SR332