NP3016T-16D(3IN1): Bộ chuyển đổi 16 cổng RS-232/485/422 sang Ethernet Rackmount

Standard: 10Base-T, 100Base-TX

Protocol: TCP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS

Rate: 10/100M automatic flow control, MDI/MDI-X autotunning

Interface quantity: 1 or 2

Interface form: RJ45

Duplex mode: full/half duplex mode self-adaption

Operating mode: 4 sessions, support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang and UDP Multicast operating modes

Standard: EIA RS-232C, RS-485, RS-422

Quantity of serial port: 4 RS-485/422 or 3IN1 serial ports

RS-232 signal: DSR, RTS, GND, TXD, RXD, DCD, CTS, DTR

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, GND, R+, R-

Baud rate: 300-115200bps

Data bit: 5bit, 6bit, 7bit, 8bit

Parity bit: None, Even, Odd, Space, Mark

Stop bit: 1bit, 2bit

Interface form:

• RS-232 serial port, adopt RJ45
• RS-485/422 serial port with isolation, adopt 5 pins 5.08mm pitch terminal blocks
• 3IN1 serial port, adopt RJ45

Flow control: RTS/CTS, DTR/DSR, XON/XOFF

Direction control: RS-485 direction adopts data flow automatic control technology

Load capacity: RS-485/422 end supports 32 points polling (customizable 128 points)

Pull high/low resistor for RS-485: 4.7kΩ

Electromagnetic isolation strength: RS-485/422 serial port (terminal block), 1.2kV

Power supply: 85~265VAC

Single power supply: NP3016T-16D(RS-232), NP3016T-16D(3IN1), NP3016T-16DI(RS-485)

Dual power supply: NP3116T-16D(3IN1)

NP3016T-16D(RS-232)

No-load: 6.7W@220VAC>

Full-load: 7.3W@220VAC>

NP3016T-16DI(RS-485)

No-load: 7.1W@220VAC>

Full-load: 7.9W@220VAC>

NP3016T-16D(3IN1)

No-load: 6.7W@220VAC>

Full-load: 7.3W@220VAC>

NP3116T-16D(3IN1)

No-load: 5.4W@220VAC>

Full-load: 5.7W@220VAC>

Housing: IP30 protection, metal

Installation: rack mounting

Dimension (W x H x D): 441.6mm×44.6mm×207.9mm

Weight: ≤2500g

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

• Air discharge: ±8kV
• Contact discharge: ±6kV

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3

• Power supply: ±2kV
• Signal: ±1kV

IEC 61000-4-5 (Surge), Level 3

• Power supply: common mode±2kV, differential mode±1kV
• Signal: common mode ±1kV, differential mode ±1kV

Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6