IES6200-PN-16T4GS-2P48 là switch ethernet layer 2 công nghiệp hỗ trợ quản lý có 20 port 100M/gigabit , đồng thời hỗ trợ Profinet RT truyền thông thời gian thực và lớp phù hợp CC-B. Hệ thống mạng hỗ trợ nhiều giao thức nổi tiếng như PROFINET, STP/RSTP/MSTP, ERPS, MRP, 802.1Q VLAN, QoS function, IGMP static multicast, SNMP, LLDP, RMON, DHCP, NTP,... Switch IES6200-PN-16T4GS-2P48 có chức năng quản lý hoàn hảo, hỗ trợ cấu hình cổng, kiểm soát truy cập, chuẩn đoán mạng, cấu hình nhanh, nâng cấp trực tuyến......
Các tính năng thêm mới
- PROFINET conforms to the consistency class CC-B, which can respond to real-time communication, fast error detection and network self-healing quickly.
- SNMPv1/v2c/v3 is used for network management of various levels.
- Port mirroring can conduct data analysis and monitoring, which is convenient for online debugging.
- QoS supports real-time traffic classification and priority setting.
- DHCP server can be used for distributing IP address with different strategies.
- File management is convenient for the device rapid configuration and online upgrading.
- User password can conduct user hierarchical management to improve the device management security.
- Mac port lock could strengthen the flexibility and security of network
- E-mail alarm is convenient for rapid fault discovery during remote management
- Relay alarm is convenient for troubleshooting of construction site
- Storm suppression can restrain broadcast, unknown multicast and unicast
- VLAN is used for simplifying network planning
- Port Trunking can increase network bandwidth and enhance the reliability of network connection to achieve optimum bandwidth utilization
- IGMP Snooping and static multicast can be used for filtering multicast traffic to save the network bandwidth
- SW-Ring, MRP, STP/RSTP/MSTP can achieve network redundancy, preventing network storm.
- RMON can be used for efficient and flexible network monitoring.
- LLDP can achieve automatic topology discovery, which is convenient for visual management.
- Conduct network diagnosis and troubleshooting via Ping and Traceroute.
- With high reliability and stability, ERPS could avoid broadcast storm caused by data loopback.
- 802.1X authentication could strength the flexibility and security of network
- Loop detection could efficiently eliminate the influence caused by port loopback by detecting the existence of loopback in each port of switch periodically
Thông số kỹ thuật sản phẩm
Standard & Protocol
|
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3z for 1000Base-X
IEC 61158 and IEC 61784 for PROFINET
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEC 62439-2 for MRP
IEEE 802.1Q for VLAN
IEEE 802.1p for CoS
IEEE 802.1X for 802.1X Authentication
IEEE 802.1AB for LLDP
|
Industrial Ethernet
|
PROFINET V2.4
|
Management
|
SNMP v1/v2c/v3 Centralized Management of Equipment, Port Mirroring, QoS, DHCP Server, File Management, Port Statistics, LLDP, Log Management, Syslog Server
|
Security
|
User privilege classification, power alarm, port alarm, temperature alarm, MRP alarm, network load alarm, error neighbor alarm, error frame alarm, dropped frame alarm, relay alarm, mail alarm, SNMP Trap alarm, 802.1X, DHCP Snooping, and loop detection.
|
Switch Function
|
802.1Q VLAN, Static Port Aggregation, Bandwidth Management, Flow Control
|
Unicast / Multicast
|
Static Multicast, IGMP-Snooping
|
Redundancy Technology
|
SW-Ring, MRP(Master/Client), STP/RSTP/MSTP, ERPS
|
Troubleshooting
|
Ping, Traceroute
|
Time Management
|
NTP server and client
|
Interface
|
Copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning
SFP interface: Gigabit SFP slot
Console port: CLI command line management port(RS-232), RJ45
Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output, current load capability is 5A@30VDC or 10A@125VAC>
|
Indicator
|
Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator
|
Switch Property
|
Transmission mode: store and forward
MAC address: 8K
Buffer: 3Mbit
Backplane bandwidth: 12.8G
Switch time delay: <10μs
|
Power Supply
|
12~48VDC, 4-pin 7.62mm pitch terminal blocks
Dual power supply redundancy, non-polarity and anti-reverse connection
Support 4A overcurrent protection
|
Power consumption
|
No-load: 5.28W@24VDC>
Full-load: 11.06W@24VDC>
|
Working Environment
|
Operating temperature: -40~75℃
Storage temperature:-40~85℃
Relative humidity: 5%~95% (no condensation)
|
Physical Characteristic
|
Housing: IP40 protection, metal
Installation: DIN-Rail mounting
Dimension (W x H x D): 70mm×160mm×130mm
Weight: ≤ 1.1kg
|
Industrial Standard
|
IEC 61000-4-2 (ESD, electronic static discharge), Level 4
Air discharge:± 15kV
Contact discharge: ±8kV
IEC 61000-4-4 (EFT, electrical fast transient), Level 4
Power supply: ±4kV
Ethernet port: ±2kV
Relay: ±4kV
IEC 61000-4-5 (Surge), Level 2
Power supply: common mode±1kV, differential mode±500V
Ethernet port: ±2kV
Relay: common mode ±1kV, differential mode±500V
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
|
Authentication
|
CE, FCC, RoHS
|