IPS-2042P Switch công nghiệp 6-port lite-managed PoE Ethernet switch with 4x 10/100Base-T(X) P.S.E. and 2x 100Base-FX, SFP của hãng ORing-Đài Loan hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. IPS-2042P thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh…
Tính năng của sản phẩm:
- Fastest Redundant Ethernet Ring : O-Ring (Recovery time < 10ms over 250units of connection)
- Open-Ring support the other vendor’s ring technology in open architecture
- O-Chain support the multiple redundant ring technology
- RSTP/STP (IEEE 802.1w/D)
- SNMP v1/v2c/v3 support for secured network management
- Configurable by Web-based and Windows utility (Open-Vision)
- Support LLDP (Link Layer Discovery Protocol)
- Event notification through Syslog, Email, and SNMP trap.
- Two 100Base-FX SFP port support for long distance connection
- 4 ports support P.S.E. based on IEEE 802.3af standard up to 25 Watts per port
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
Thông số kỹ thuật của sản phẩm:
Specifications |
ORing Switch Model |
IPS-2042P |
Physical Ports |
|
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. |
4 |
100Base-FX SFP Ports |
2 |
Technology |
|
Ethernet Standards |
IEEE 802.3 for 10Base-T IEEE 802.3u for 100BaseTX and 100Base-FX IEEE 802.3x for Flow control IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 802.3af PoE specification (up to 25 Watts per port for P.S.E.) |
MAC Table |
1024 MAC addressessses |
Priority Queues |
4 |
Processing |
Store-and-Forward |
Switch Properties |
Switching bandwidth : 1.2Gbps VLAN : Port Based |
Security Features |
Enable/disable ports VLAN to segregate and secure network traffic SNMPv3 encrypted authentication and access security |
Software Features |
STP/RSTP (IEEE 802.1D/w) Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units Open-Ring support the other vendor’s ring technology in open architecture Port configuration, status, statistics, monitoring, security DHCP Client |
Network Redundancy |
O-Ring Open-Ring O-Chain STP RSTP Fast recovery |
LED Indicators |
|
Power /PoE Indicator |
Green : Power LED x 3, Green : PoE LED x 4 |
R.M. Indicator |
Green : Indicates that the system is operating in O-Ring Master mode |
Fault Indicator |
Amber : Indicates unexpected event occurred |
O-Ring Indicator |
Green : Indicates that the system is operating in O-Ring mode |
10/100Base-T(X) RJ45 Port Indicator |
Green for port Link/Act. Amber for Link |
SFP Socket Indicator |
Green for port Link/Act. Amber for Link |
Fault contact |
|
Relay |
Relay output to carry capacity of 1A at 24VDC |
Power |
|
Redundant Input Power |
Triple DC inputs. 2x48VDC on 7-pin terminal block , 1x48VDC on power jack |
Power Consumption (Typ.) |
7 Watts Max. |
Overload Current Protection |
Present |
Reverse Polarity Protection |
Present on terminal block |
Physical Characteristics |
|
Enclosure |
IP-30 |
Dimensions (W x D x H) |
54.2(W) x 106.1(D) x 145.4(H) mm (2.13x4.18x5.72 inch.) |
Weight (g) |
700 g |
Environmental |
|
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Operating Temperature |
-40 to 70°C (-40 to 158°F) |
Operating Humidity |
5% to 95% Non-condensing |
Các bài viết tham khảo:
"BKAII -Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"