MN-DA2-DIN Distributed Motionnet 2-ch AO Module của hãng ICP-DAS đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. MN-DA2-DIN được thiết theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông minh, hệ thống kiểm soát an ninh,…
Tính năng của sản phẩm:
● |
Dual channel +/- 10 V analog output |
● |
RJ-45 communication port |
● |
2 way isolation on power, communication |
● |
Tiny design (90 × 75 × 57 mm), DIN rail compatible |
● |
16-bit high resolution, 0.3 mV min |
● |
Software calibration of offset/gain |
● |
Rapid output rate, Slew rate = 20 V / us |
● |
High precision, DNL = +/-1 LSB, INL = +/-3 LSB |
|
|
|
Thông số kỹ thuật của sản phẩm:
Analog Output |
Output Channels |
2 |
Voltage Level |
+/- 10 V |
Load Current |
+/- 20 mA Max per channel |
Response Speed |
Slew rate = 20 V / us |
Output Accuracy |
DNL = +/- 1 LSB INL = +/- 3 LSB |
Calibration Function |
Off set: provided by software Gain: provided by software |
Interface |
LED Indicators |
Communication state (Link, Error) Internal 3.3 V Power Terminal resistor switch |
Communication Speed |
Selectable 2.5, 5, 10 or 20 Mbps by DIP Switch |
Cyclic scan time |
15.1 µs per device (20 Mbps) |
Power |
Voltage Range |
24 VDC +/-5% (1000 V isolated) |
Power Consumption |
3 W max. |
Protection |
Reverse voltage and overcurrent protection |
Connection |
5-Pin removable terminal block |
Mechanical |
Case |
Plastic |
Flammability |
UL 94V-0 housing |
Dimensions (W x L x H) |
75 mm x 90 mm x 57 mm |
Installation |
DIN-Rail Mounting |
Environmental |
Operating Temperature |
0 °C ~ + 60 °C |
Storage Temperature |
-20 °C ~ +80 °C |
Operating Humidity |
10 ~ 85%, Non-condensing |
Storage Humidity |
5 ~ 95% RH, Non-condensing |
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"