NP302T-2DI(RS-232)-P(9-48VDC): 2x RS-232 or RS-485/422 Serial Device Server gồm 1x 100M Copper, 2x RS-232

Standard: 10Base-T, 100Base-TX

Protocol: TCP, UDP, ARP, HTTP, TELNET, ICMP, DHCP, DNS

Rate: 10/100M automatic flow control, MDI/MDI-X autotunning

Interface quantity: 1

Interface form: RJ45

Duplex mode: full/half duplex mode self-adaption

Operating mode: 4 sessions, support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang and UDP Multicast operating modes

Standard: EIA RS-232C, RS-485, RS-422

Quantity of serial port: 2 RS-232 or RS-485/422 serial port

RS-232 signal: RXD, TXD, DTR, GND, DSR, RTS, CTS, DCD

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, GND, R+, R-

Baud rate: 300-115200bps

Data bit: 5bit, 6bit, 7bit, 8bit

Parity bit: None, Even, Odd, Space, Mark

Stop bit: 1bit, 2bit

Interface form: isolated RS-232, adopt RJ45;

isolated RS-485/422, adopt 10 pins 5.08mm pitch terminal blocks

Flow control: RTS/CTS, DTR/DSR, XON/XOFF

Load capacity: RS-485/422 end supports 32 points polling (customizable 128 points)

Pull high/low resistor for RS-485: 4.7kΩ

Operating temperature range: -40~75℃

Storage temperature range: -40~85℃

Relative humidity: 5%～95%（no condensation）

Housing: IP40 protection, metal

Installation: wall mounting

Dimension (W x H x D): 69mm×22mm×100mm

Weight: ≤240g

IEC 61000-4-2 (ESD, Electro-static Discharge) ，Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6